M.Bonanni's 370Z Project "Born Again"

ChrisSlicks · 12-30-2010, 04:21 PM

Quote:

Originally Posted by M.Bonanni

Same, just the off-the-shelf 12/10 setup.

Make sure you specify 12/10 as apparently the default is 10/8 even for the ER. I know all the original orders you placed for the ER's got shipped as 12/10 so I'm sure you know what you are doing.

M.Bonanni · 12-30-2010, 04:31 PM

Quote:

Originally Posted by ChrisSlicks

Make sure you specify 12/10 as apparently the default is 10/8 even for the ER. I know all the original orders you placed for the ER's got shipped as 12/10 so I'm sure you know what you are doing.

I don't mind either way personally since its just for daily driving use, but I was always under the impression the ERs were off-the-shelf at 12/10. At least that was the original plan back when they were first released.

ChrisSlicks · 12-30-2010, 04:54 PM

Quote:

Originally Posted by M.Bonanni

I don't mind either way personally since its just for daily driving use, but I was always under the impression the ERs were off-the-shelf at 12/10. At least that was the original plan back when they were first released.

That's what I always thought as that is what mine are, but Scott @ RA confirmed with Pete that 10/8 is the default and the website info shows that as well.

M.Bonanni · 12-30-2010, 05:01 PM

Learn something new every day.

Wonder why the change.

christian370z · 12-30-2010, 07:41 PM

Quote:

Originally Posted by M.Bonanni

Change of plans on the suspension setup. Springs are out, going back to BC Racing ER Type coilovers! Couldn't pass up this deal.

Damn! I was looking forward to you getting the Swifts haha, you made the better choice though especially with your experience.

M.Bonanni · 12-30-2010, 08:31 PM

Quote:

Originally Posted by christian370z

Damn! I was looking forward to you getting the Swifts haha, you made the better choice though especially with your experience.

Well for what its worth, after researching it seems the Swifts are the most thought out lowering spring on the market for the 370. They don't over-lower the car past the point where the suspension geometry starts to go to s**t and the spring rates are designed to work within the damper range of the OEM shocks, but still stiffer than stock. Not to mention Swift springs are just flat out better quality. Their actual rates are more consistent between a full set and they are usually lighter, plus they don't contort and bind under compression like others do.

Bluebatmobile · 01-10-2011, 11:49 AM

Quote:

Originally Posted by M.Bonanni

Not much going on here lately unfortunately, but I did recently get some FX Carbon Fiber film to try out. It's really pretty sweet stuff, its textured like real dry CF, reflects light the same as real dry CF, and looks flat out awesome. I only had enough to have my rear bumper valance done, but will be getting more soon to do some other small things like mirrors, front fangs, and maybe the roof.

http://www.fxcarbonfiberfilm.com

Looks awesome!

Bat

CrownR426 · 01-14-2011, 03:48 PM

Hey Mike I just picked up DSport magazine and I realized on the cover it said Redline Time Attack! I wondered if I'd see you driving the berk bmw but man I see a sweet picture of your Brilliant Silver 370z in action!
Says Buddy Club Street RWD Class Winner: Mike Bonanni | 370z | 2:26.548!
Amazing time and congrats on yet another triumph!
I noticed you do not have your rear valence so I'm assuming this was couple months ago.
Sick driving in the rain!
Kick *** and take names!

CrownR426 · 01-14-2011, 03:49 PM

Oh wait... it says you drove a BMW 135I # 36 but thats on your 370z o____O;;

M.Bonanni · 01-14-2011, 04:10 PM

Quote:

Originally Posted by CrownR426

Hey Mike I just picked up DSport magazine and I realized on the cover it said Redline Time Attack! I wondered if I'd see you driving the berk bmw but man I see a sweet picture of you in you Brilliant Silver 370z!
Says Buddy Club Street RWD Class Winner: Mike Bonanni | 370z | 2:26.548!
Amazing time and congrats on yet another triumph!
I noticed you do not have your rear valence so I'm assuming this was couple months ago.
Sick driving in the rain!
Kick *** and take names!

Oh nice! Thanks for the compliments! I haven't seen it yet. The Berk BMW didn't make it to that event so to salvage points toward the championship I entered my bone stock 370Z. Luckily it was raining since I didn't have an oil cooler or anything and I ended up getting an unexpected win out of it haha. It was a fun event and yes, it was back in October '10 so it was a few months ago. As for the number, the number and the points travel with the driver so long as I drive in the same class.

CrownR426 · 01-14-2011, 04:13 PM

Quote:

Originally Posted by M.Bonanni

Oh nice! Thanks for the compliments! I haven't seen it yet. The Berk BMW didn't make it to that event so to salvage points toward the championship I entered my bone stock 370Z. Luckily it was raining since I didn't have an oil cooler or anything and I ended up getting an unexpected win out of it haha. It was a fun event and yes, it was back in October '10 so it was a few months ago. As for the number, the number and the points travel with the driver so long as I drive in the same class.

Awesome congrats once again and you should pic up the issue that's a nice picture of the Z on page 78. You got a half page pic.

M.Bonanni · 01-14-2011, 06:29 PM

Thanks! Will have to see if I can find it tonight. I think my subscription is up....

Boost_lee · 01-15-2011, 01:09 PM

Yep, just saw the pic now also. Congrats!

M.Bonanni · 03-21-2011, 10:45 PM

The 370Z finally hit its time for an oil change so after a few weeks of sitting on my brand new 25 row Z1 Motorsports oil cooler kit, I finally installed it!

The install instructions were very thorough and easy to follow. The install process was also fairly simple if you take the time to do it correctly. I opted for the 25 row which is their middle kit, they have one smaller and one larger. I chose the middle one basically because I live in Vegas where it gets crazy hot in the summer and although the smaller one would have surely been fine for daily driving, the larger one gives me a bit more freedom to do some spirited driving and probably even a track day or two. So far the thermostatic sandwich plate works well, oil doesn't take forever to get to temp and stays static anywhere between 180 and 200 depending on if I am moving or in traffic. I haven't done any real hard driving with the kit yet aside from the occasional 1st to 4th pull. A+ kit with cool features and quality components for a fair price. Had a good customer service experience with Z1 when ordering, shipping was fast, packaging was excellent, and as mentioned the instructions were overly detailed which isn't a bad thing.

Gunzero · 03-21-2011, 11:42 PM

Do you still have those forgestars

12-30-2010, 05:01 PM	#439 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	Learn something new every day. Wonder why the change. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

01-14-2011, 03:48 PM	#443 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 847	Hey Mike I just picked up DSport magazine and I realized on the cover it said Redline Time Attack! I wondered if I'd see you driving the berk bmw but man I see a sweet picture of your Brilliant Silver 370z in action! Says Buddy Club Street RWD Class Winner: Mike Bonanni \| 370z \| 2:26.548! Amazing time and congrats on yet another triumph! I noticed you do not have your rear valence so I'm assuming this was couple months ago. Sick driving in the rain! Kick *** and take names! __________________ Love + Hardwork + Passion RIP SVTRacer Last edited by CrownR426; 01-14-2011 at 04:09 PM.

01-14-2011, 03:49 PM	#444 (permalink)
CrownR426 A True Z Fanatic Join Date: Nov 2008 Location: South Korea Posts: 4,676 Drives: Manual Rep Power: 847	Oh wait... it says you drove a BMW 135I # 36 but thats on your 370z o____O;; __________________ Love + Hardwork + Passion RIP SVTRacer

01-14-2011, 06:29 PM	#447 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	Thanks! Will have to see if I can find it tonight. I think my subscription is up.... __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form

03-21-2011, 10:45 PM	#449 (permalink)
M.Bonanni The370Z.com Sponsor Join Date: Nov 2008 Location: Las Vegas Posts: 2,575 Drives: Fast Rep Power: 1320	The 370Z finally hit its time for an oil change so after a few weeks of sitting on my brand new 25 row Z1 Motorsports oil cooler kit, I finally installed it! The install instructions were very thorough and easy to follow. The install process was also fairly simple if you take the time to do it correctly. I opted for the 25 row which is their middle kit, they have one smaller and one larger. I chose the middle one basically because I live in Vegas where it gets crazy hot in the summer and although the smaller one would have surely been fine for daily driving, the larger one gives me a bit more freedom to do some spirited driving and probably even a track day or two. So far the thermostatic sandwich plate works well, oil doesn't take forever to get to temp and stays static anywhere between 180 and 200 depending on if I am moving or in traffic. I haven't done any real hard driving with the kit yet aside from the occasional 1st to 4th pull. A+ kit with cool features and quality components for a fair price. Had a good customer service experience with Z1 when ordering, shipping was fast, packaging was excellent, and as mentioned the instructions were overly detailed which isn't a bad thing. __________________ MikeBonanni.com Twitter: http://www.twitter.com/MikeBonanni Facebook: http://www.facebook.com/MBonanni36 Function > Form Last edited by M.Bonanni; 03-22-2011 at 04:49 PM.

01-15-2011, 01:09 PM	#448 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Yep, just saw the pic now also. Congrats!

03-21-2011, 11:42 PM	#450 (permalink)
Gunzero Track Member Join Date: Oct 2009 Location: Texas Posts: 889 Drives: Nissan 370z Rep Power: 258	Do you still have those forgestars __________________