Open carry on your right leg.

Hey, who knows where to get some 30 round AR mags without being bent over?

Either Magpuls or CHEAP arse mags

Is there anyone else who does this....

When I open a box of WWB .44Mag or my .50AE ammo boxes and I slide the ammo out and see all the brass or the hollow points (respectively), a shít eating grin and happiness comes across my face, lol

You live in California. I'm not sure what advice is even valid for your state. I do know this:

http://www.nationalgunsupply.com/Mag...ca-blocked.htm

check here regularly the get small supply shipments but they are always gone by morning, now that I know your lookin I'll let you know when I see them pop up

I ordered a Magpul W/window from here

Feb 8th. Your state capital.

UPDATE: vltor stock and buffer tube now added... getting closer


http://www.the370z.com/members/edub3...ltor-stock.jpg

Looks good, and if you find complete QUALITY BCG's in stock, PM me after you buy yours! I need 3, all are gifts to friends. This Christmas I was to give people uppers, but could not find BCG's :(

Deal. uppers are so difficult to find right now.

Yeah, I ordered two from PSA back during the Black Friday sale (Midlength flat-top with fixed FSB and "regular" handguards) for gifts and it took me over a month and a half for PSA to deliver both. Now I need the BCG's.

You can ship to TX! :tup:

True story!

bolt carrier groups.... whos got em

I bought 7 CA off list AR's in September for $375 each. I would not pay $475 like the guy wanted and he countered with $375, so I bought them as who would want CA lowers with "bullet buttons" or paddles over the grips, so as to render them non pistol gripped. I primarily bought them for the uppers.

I tried to sell one for $700 and could not. I have now sold them all, most for $1100, one scoped model I got $1800.

Somebody else, who feared confiscation, sold me two more Vietnam era, no forward assist Colt uppers with off list lowers. They went just as fast.

I do feel that nationally, guns will be OK. But in places like CA, NY, etc. It will get worse.

nowhere bro... Its rape city.

2 ways...

Palmetto State Armory (PSA) or you can build a piston AR with an Adams Arms kit. :)

I'm doing the latter

I have 10 30-round steel magazines and 9 30-round PMAGs so I just wanted one more PMAG to round things out (don't ask...I have a thing about symmetry). So I found on Cheaper Than Dirt they had PMAGs listed for 79.95 and on sale for 49.95 so I bought one. My butt hurts...

http://www.the370z.com/members/black...-22-40-s-w.jpg

I picked these beauties up just in case they ban high-capacity magazines. The background check just came back today, in which it took 10 days. Usually it takes about 15 minutes. The H&K P2000 is 9mm and the Glock is model 22 (full-sized .40 S&W). I had a Glock 19, but getting the P2000 made it kinda redundant, but I still wanted at least one Glock.

Daniel Defense Ambush V7 5.56MM 18 inch MOINF - fort worth sports equipment for sale - backpage.com

In stock!

PSA hasn't had them for weeks, and I don't like piston AR's.

I have a P2000 in .40 with the LEM Trigger... I want a Glock in 9mm

Lol, I'm that way about other things


I had 2 steel mags that came with my gun and 16 PMAGs, I just gave 2 away to a friend for his birthday. So I wanted to know if you guys have the down low on a good place not to get fisted

Oh well... I do. But i'm interested in
a. eventually running suppressed
b. Don't like the idea that cleaning is IMPERATIVE after use.
c. Don't like heat on the bolt. (don't care what DI fanboys claim either) Heat= increased wear on a vital component
d. During these times, getting an M4 build operational takes some compromises
e. Running the Right length piston system can keep a gun fairly balanced.
f. Don't believe the hype. Magpul fore-end handguard help increase balance and cut heat from the front.
g. Carrier tilt? BS and ancient. Dont get me started.

Don't know or care about pmags. I have quite a few that I bought a long time ago and don't really use for about $11 a piece and am now tempted to sell for the low, low price of $100 each. My 30(?) gallon trash bags full of GI steel mags are more than sufficient since I don't even have enough ammo to fill them.

I can't believe i cant find 10 round AK mags. Even 10 round mags are impossible to find and the prices are high... why if there is no ban restriction.

I need 2 AK, 10 round, 7.62 mags if anyone can find?

AK's in general seem to be impossible to find, at least here in CA. On the main CA gun forum classifieds there are probably hundreds of AR's, lowers, and over priced pmags, but literally no AK's or parts for them. You probably can't even find 10-rounders since whatever was available pre Sandy Hook shipped out west to CA immediately right after.

AK parts kits i have found, but they used to be $200, now they are $400.

This fkin shyt is getting corny already. Every hobby has to be exploited and gouge marketed, for political or capitalist reasons. Like car tuning etc. That shyt has gone up 200% in price over the last 10 years. Remember when intake exhaust and headers was less than $2,000???

why the f r u guys paying $50-$70 a pmag? even with all this craziness my local gun store has them for 30....

i got some swamp land in florida for sale if anyone wants in

:bowrofl: That's a good one...AR mags in stock at a local gun store.

:ugh2: was just in there on sunday

They reeeally aren't hard to find for a whole lot less than $70

http://www.gunbroker.com/Auction/Vie...Item=327894081



so about my swamp land...

Rooster presents your gun porn for the day

http://www.tactical-life.com/online/..._dunn-0656.jpg

:yum:

My .02 and experiences on it.

Piston guns are fine. The design is a good solution to a problem that really doesn't exist, but they're a completely viable weapon system. A friend of mine actually created a line of piston guns (Huldra). I've spent a lot of time talking with him and his technical director (who is also my primary instructor). I still don't own one even though I could get one at cost any time I want. OTOH, he has a new sister line of DI guns coming out (Korstog .. http://www.facebook.com/korstogarms?ref=ts&fref=ts )

Unless he's making his own parts 100% in-house, horrible time to come out with a new AR. That said, if he can actually get the parts to build them, I bet they sell!

Doublt-tap 'em with a shovel!
DIY: Shovel AK - photo tsunami warning!

Anyone have experience with one of these?

ShotLock Universal Solo Vault Safe

Obviously not perfectly secure, but I like the idea.

Kool, you know those guys!!! In my search for parts I've ran across them. Hmmm so are you holding back on an AR kinneck????:crying:

Picked this up from a pawn shop today for $399+Tax. Still had tons of factory copper-colored "lube" in it when I broke it down for cleaning. WIN!
http://i48.tinypic.com/aeoaci.jpg

I love my G19. I wish it wouldn't shoot me in the face, though (Gen 4). But I guess I don't mind anymore. :|

I finally was able to turn my Gen 3 Glock 19 into a functional pistol by changing the ejector to the 30274 (Gen 4 ejector) and putting in Apex' Gen 3-specific extractor and a stiffer bearing spring with original LCI bearing. It's an ok pistol now, but the PPQ has been and is a vastly superior pistol IMHO. Prior to that $70 upgrade, my Glock was not functional, with about 5 rounds out of every magazine hitting me in the forehead and about the same number ending up in my shirt pocket. It was beyond merely annoying; clearly a malfunction and one that appears to be not uncommon, judging by the number of people who post about it with varying degrees of disgust and anger.

The incidence of malfunction appears to be lower in the Gen 4 9mm Glocks, and the Apex extractors appear to fix them more reliably than the Gen 3s. Still no word that Glock has fixed or even acknowledged that their 9mm pistols have a high rate of malfunction.