The New “What did you do with your Z today” (with off topic replies) XXXVI

madwi · 04-17-2020, 11:21 AM

Quote:

Originally Posted by abm89

Those craft squares are tempting. I'm more inclined to go with the MCR glass replacement at this point as I structurally prefer the stock mirrors with my motor mounts.

I'm not the biggest fan of my decision to go with the non locking version as Im constantly having to get out and adjust the passenger side mirror. Pisses me off when I bump it and I bump it way more than I thought I would.

I personally couldnt go back to a giant oem style mirror housing though.

JARblue · 04-17-2020, 11:22 AM

Quote:

Originally Posted by madwi

I'm not the biggest fan of my decision to go with the non locking version as Im constantly having to get out and adjust the passenger side mirror. Pisses me off when I bump it and I bump it way more than I thought I would.

I personally couldnt go back to a giant oem style mirror housing though.

Does CS make a locking version?

madwi · 04-17-2020, 11:34 AM

Quote:

Originally Posted by JARblue

Does CS make a locking version?

Yeah they do, I cant remember the model code off hand

Hotrodz · 04-17-2020, 11:37 AM

Quote:

Originally Posted by madwi

I'm not the biggest fan of my decision to go with the non locking version as Im constantly having to get out and adjust the passenger side mirror. Pisses me off when I bump it and I bump it way more than I thought I would.

I personally couldnt go back to a giant oem style mirror housing though.

I hate that about my Evo-r as well. My only issue with upgrading to Craft Square is the cost because my car is a track car first now.

Sent from my SM-G965U using Tapatalk

JARblue · 04-17-2020, 11:38 AM

Quote:

Originally Posted by Hotrodz

I hate that about my Evo-r as well. My only issue with upgrading to Craft Square is the cost because my car is a track car first now.

That makes no sense. Pay to play y0

My EVO-R set wouldn't even stay in position in the wind driving down the highway. Lein had to basically redo all the hardware when I sold it to him.

madwi · 04-17-2020, 11:39 AM

Quote:

Originally Posted by Hotrodz

I hate that about my Evo-r as well. My only issue with upgrading to Craft Square is the cost because my car is a track car first now.

Sent from my SM-G965U using Tapatalk

In the grand scheme of having the engine built, what is a couple more pennies outta the treasure chest?

BettyZ · 04-17-2020, 12:17 PM

Quote:

Originally Posted by madwi

I'm not the biggest fan of my decision to go with the non locking version as Im constantly having to get out and adjust the passenger side mirror. Pisses me off when I bump it and I bump it way more than I thought I would.

I personally couldnt go back to a giant oem style mirror housing though.

This.

The pass mirror drives me crazy. Never can get it aligned just perfect. But, I'd also never ever put the OEM mirrors back on.

redondoaveb · 04-17-2020, 12:22 PM

Quote:

Originally Posted by BettyZ

This.

The pass mirror drives me crazy. Never can get it aligned just perfect. But, I'd also never ever put the OEM mirrors back on.

I cover my car every night with a custom fit tight cover. My mirrors never move.

And

, I hate the stock mirrors.

Hotrodz · 04-17-2020, 11:29 AM

Quote:

Originally Posted by abm89

Those craft squares are tempting. I'm more inclined to go with the MCR glass replacement at this point as I structurally prefer the stock mirrors with my motor mounts.

You would be surprised at the visibility with the Craft Squares. I have Evo R that are half the price and they are not on the par of Craft Squares but I prefer them over OEM especially on the track.

Sent from my SM-G965U using Tapatalk

abm89 · 04-17-2020, 01:42 PM

Quote:

Originally Posted by Hotrodz

You would be surprised at the visibility with the Craft Squares. I have Evo R that are half the price and they are not on the par of Craft Squares but I prefer them over OEM especially on the track.

Sent from my SM-G965U using Tapatalk

I used to run EVO-Rs and I preferred those over the stock mirrors because of the wide angle.

but you know, Evo R = one breaking and flying into my car.

madwi · 04-17-2020, 11:11 AM

The dog is cold too after I shaved him down yesterday. He glared at me when I opened the door this morning and the 30 degree air hit him

Zoren 370 · 04-17-2020, 11:17 AM

Quote:

Originally Posted by madwi

The dog is cold too after I shaved him down yesterday. He glared at me when I opened the door this morning and the 30 degree air hit him

Did he growled at you..ARrrzzhole!!!?

JARblue · 04-17-2020, 11:41 AM

Lunchtime!

Too bad I don't have any food at the house

It's ok. It's never hurt me to miss a meal

madwi · 04-17-2020, 01:09 PM

Jar's patented face mask has hit the shelves.

bunk · 04-17-2020, 01:20 PM

Today I was supposed to go to the big guys house to work on his home network. He just called me and cancelled and asked if I can do it tomorrow. Yep, of course! If I worked today, it wouldve been included in my normal work hours. Tomorrow, its 1.5x rate.

04-17-2020, 11:41 AM	#13 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Lunchtime! Too bad I don't have any food at the house It's ok. It's never hurt me to miss a meal __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-17-2020, 01:20 PM	#15 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684370	Today I was supposed to go to the big guys house to work on his home network. He just called me and cancelled and asked if I can do it tomorrow. Yep, of course! If I worked today, it wouldve been included in my normal work hours. Tomorrow, its 1.5x rate. __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 10:10 PM
The New “What did you do with your Z today” (with off topic replies) XXXV	Spoiler	The Lounge (Off Topic)	9999	04-08-2020 08:47 PM
The New “What did you do with your Z today” (with off topic replies) XXXIV	Spoiler	The Lounge (Off Topic)	9999	01-24-2020 05:42 PM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 08:15 PM

04-17-2020, 11:11 AM	#11 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	The dog is cold too after I shaved him down yesterday. He glared at me when I opened the door this morning and the 30 degree air hit him

04-17-2020, 01:09 PM	#14 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Jar's patented face mask has hit the shelves.