The New “What did you do with your Z today” (with off topic replies) XXXIV

Rusty · 12-28-2019, 05:37 AM

Quote:

Originally Posted by madwi

I have a tapered deep impact socket that the taper married to a universal helps it go past the rack perfectly. One person holds it on straight and other tosses all their weight into the bar with 40" of extensions on it.

What's fun is when you have everything that you need and all set to apply pressure to the bolt. You have that 40" of pipe on the breaker bar. The only thing that happened is that you bent the breaker bar 45 degrees at the head. Take said breaker bar back to Snap On and tell him not to ask questions.

-ZS-Carpenter · 12-28-2019, 06:02 AM

Quote:

Originally Posted by BettyZ

I had three impact swivels and what felt like 16 feet of extensions for the driver side bolts. A real Franken-tool.

Sent from my SM-G955U using Tapatalk

I'm not sure how many extensions I used but the breaker bar was in the airbox area. You get much better leverage when the breaker bar is almost out of the engine bay

jchammond · 12-28-2019, 06:18 AM

Quote:

Originally Posted by JARblue

Proper tools don't require more than 24 inches of extension from what I can tell.

jchammond · 12-28-2019, 06:23 AM

I be up, sorta

Snack from last night & then a pbj...I was comotosed afterwards

God-Speed · 12-28-2019, 06:26 AM

Good Saturday Morning All. Hope all is well with you guys. Getting caught up on some things this morning then its off to do some shopping and exchange a few presents.

For now its enjoying some morning coffee. Oh and College Championship games later on today. Have a good one guys and be safe out there!!

jchammond · 12-28-2019, 06:48 AM

Quote:

Originally Posted by -ZS-Carpenter

Got to step up that sim racing game

https://www.reddit.com/r/DIY/comment...ace_simulator/

https://www.youtube.com/watch?v=9CI9KQRreQ0

Simulating race games :ugh2 that’s kinda like fantasy feetball

jchammond · 12-28-2019, 06:50 AM

Quote:

Originally Posted by BettyZ

Did any chicks slap you after you tried the ole "let me show you the socket in my pocket" routine?

Sent from my SM-G955U using Tapatalk

I have the tools to satisfy

jchammond · 12-28-2019, 06:53 AM

morning fellas
Trying to get awaked up & from what my daughter says,,,my cat is getting pretty good at strumming a tune on the metal vent that’s mounted in the lower portion of the door

I know something has to be waking me up early

jchammond · 12-28-2019, 06:54 AM

I think that I hear the hoe’s calling

eastwest2300 · 12-28-2019, 06:58 AM

Quote:

Originally Posted by Rusty

Get your keyboard out and type

G - O - O - G - L - E

then press enter.

jchammond · 12-28-2019, 06:58 AM

Drove the old Blazer to work yesterday & I may have a hub bearing going out

Making a scraping noise while rolling & increases with speed,,,initially thought it might be the rusted rotors scraping on the pads...but idk, it’s there even when applying brakes

Only has 341,797mi on the odometer & a 1992’ model, shouldn’t be worn that much yet

eastwest2300 · 12-28-2019, 06:59 AM

Quote:

Originally Posted by madwi

"Sell me your race ramps for cheap!" You dont need them" " I dont wanna pay full price for these, sell me yours cheap."

Glad you made a decision to get your own.

you get some of these too duude...

jchammond · 12-28-2019, 07:03 AM

Here’s my old girl; one of the 3 projects that await the garage,,,not counting a couple I’m gonna work in for trade offs

Zingston · 12-28-2019, 07:05 AM

Quote:

Originally Posted by jchammond

Drove the old Blazer to work yesterday & I may have a hub bearing going out

Making a scraping noise while rolling & increases with speed,,,initially thought it might be the rusted rotors scraping on the pads...but idk, it’s there even when applying brakes

Only has 341,797mi on the odometer & a 1992’ model, shouldn’t be worn that much yet

Ha ha... yeah, you might have a busted bearing or two at that mileage. I just replaced all my hub assemblies on my hemi Commander with 134k. The old ones were ok, but... i enjoy the work, so why not?

Zingston · 12-28-2019, 07:11 AM

Quote:

Originally Posted by jchammond

Here’s my old girl; one of the 3 projects that await the garage,,,not counting a couple I’m gonna work in for trade offs

Dude, you're not supposed to drive through crime scenes...jeez!!!

12-28-2019, 06:26 AM	#7535 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,352 Drives: Prototype Rep Power: 2684376	Good Saturday Morning All. Hope all is well with you guys. Getting caught up on some things this morning then its off to do some shopping and exchange a few presents. For now its enjoying some morning coffee. Oh and College Championship games later on today. Have a good one guys and be safe out there!! JARblue, Rusty, Hotrodz and 5 others like this.

12-28-2019, 06:53 AM	#7538 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	morning fellas Trying to get awaked up & from what my daughter says,,,my cat is getting pretty good at strumming a tune on the metal vent that’s mounted in the lower portion of the door I know something has to be waking me up early God-Speed, Rusty, redondoaveb and 1 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

12-28-2019, 06:54 AM	#7539 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	I think that I hear the hoe’s calling redondoaveb and Falconquey like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

12-28-2019, 06:58 AM	#7541 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Drove the old Blazer to work yesterday & I may have a hub bearing going out Making a scraping noise while rolling & increases with speed,,,initially thought it might be the rusted rotors scraping on the pads...but idk, it’s there even when applying brakes Only has 341,797mi on the odometer & a 1992’ model, shouldn’t be worn that much yet Rusty, Hotrodz, redondoaveb and 1 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 10:10 PM
The New "What did you do with your Z today" (with off topic replies) XXIV	JARblue	The Lounge (Off Topic)	10059	08-17-2016 12:08 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 09:21 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 08:15 PM