The New "What did you do with your Z today" (with off topic replies) XXXI

jchammond · 01-19-2019, 11:01 AM

Over half dozen calls since 9:30 on this Op’s Mgr phone

I seen this coming

madwi · 01-19-2019, 12:54 PM

Trimming the fujimura bumper to fit with the intercooler. Looks like most of the center part has to be cut back to the mesh.

BoneZ · 01-19-2019, 02:01 PM

Quote:

Originally Posted by madwi

Trimming the fujimura bumper to fit with the intercooler. Looks like most of the center part has to be cut back to the mesh.

Looks like the kinda job that makes your butt suck up your draws a little as your cutting.

Leingod · 01-19-2019, 01:41 PM

That doesn't look fun...

madwi · 01-19-2019, 01:47 PM

its not bad at all really. The cutoff wheel cuts through it like butter.

jwick · 01-19-2019, 01:55 PM

I had to trim the stock bumper to fit the intercooler. Amazing what a dremel will do.

madwi · 01-19-2019, 02:07 PM

Ended up just using painters tape and cutting along the line. pretty easy job.

madwi · 01-19-2019, 02:11 PM

Ordered an oil pressure gauge from speedhut.

jwick · 01-19-2019, 02:24 PM

Quote:

Originally Posted by madwi

Ordered an oil pressure gauge from speedhut.

I used to have a bunch of gauge sensors until my Greddy Mutli-gauge LCD stopped working. Analog gauge for boost still works and i can hear the gauge cycle when I change the setting with the remote, but the LCD doesn’t show contrast anymore. Really sucks since monitoring all that **** any other way requires a ton of gauges with no place to put them in the cab.

Rusty · 01-19-2019, 02:34 PM

Quote:

Originally Posted by madwi

Ordered an oil pressure gauge from speedhut.

I have my low side set to 30, and the high side to 120.

madwi · 01-19-2019, 02:41 PM

So close. Im frozen and going to have to warm up for a bit before final fitting.

Rusty · 01-19-2019, 04:10 PM

Quote:

Originally Posted by madwi

So close. Im frozen and going to have to warm up for a bit before final fitting.

A heated garage is on your Christmas list now.

eastwest2300 · 01-19-2019, 07:15 PM

Quote:

Originally Posted by Rusty

A heated garage is on your Christmas list now.

thanks for the invite mr. madwi.

Rusty · 01-19-2019, 10:27 PM

Quote:

Originally Posted by eastwest2300

thanks for the invite mr. madwi.

Why don't you just move in. This way he doesn't have to invite you. I image he could use the extra help around the house. Washing dishes, taking out the trash, dusting, mopping the floors, cleaning the windows, etc. And you could pick up the food tab too. madwi could fix you up a nice cardboard box in the garage to sleep in, while Nismo stays in the house.

eastwest2300 · 01-20-2019, 12:54 AM

Quote:

Originally Posted by Rusty

Why don't you just move in. This way he doesn't have to invite you. I image he could use the extra help around the house. Washing dishes, taking out the trash, dusting, mopping the floors, cleaning the windows, etc. And you could pick up the food tab too. madwi could fix you up a nice cardboard box in the garage to sleep in, while Nismo stays in the house.

01-19-2019, 11:01 AM	#1 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Over half dozen calls since 9:30 on this Op’s Mgr phone I seen this coming __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-19-2019, 01:41 PM	#4 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684397	That doesn't look fun... __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

01-19-2019, 01:55 PM	#6 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	I had to trim the stock bumper to fit the intercooler. Amazing what a dremel will do. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXIX	JARblue	The Lounge (Off Topic)	9986	09-10-2018 01:33 PM
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 07:08 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 08:15 PM
The New "What did you do with your Z today" (with off topic replies) XVII	eastwest2300	The Lounge (Off Topic)	10129	05-21-2015 09:30 AM
The New "What did you do with your Z today" (with off topic replies) XIII	JARblue	The Lounge (Off Topic)	10011	08-04-2014 04:16 PM

01-19-2019, 12:54 PM	#2 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Trimming the fujimura bumper to fit with the intercooler. Looks like most of the center part has to be cut back to the mesh.

01-19-2019, 01:47 PM	#5 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	its not bad at all really. The cutoff wheel cuts through it like butter.

01-19-2019, 02:07 PM	#7 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Ended up just using painters tape and cutting along the line. pretty easy job.

01-19-2019, 02:11 PM	#8 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Ordered an oil pressure gauge from speedhut.

01-19-2019, 02:41 PM	#11 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	So close. Im frozen and going to have to warm up for a bit before final fitting.