New Soho Single exit for the 370z!!

Gregor12 · 02-21-2015, 10:03 PM

Quote:

Originally Posted by Joepro

well now we know a little bi more, looks in line with the dyno graph on their website. as well, looks like a good single option if that is what you want. I would say the dyno reads about 20 HP high on average from other graphs I have seen. As long as you are happy with it that's all that matters, it is their y pipe right? I do not see it on the website.

Yessir. Yea that's their y pipe! I'm curious to see what kinda gains it would make with test pipes and intakes. I'm goung to do some comparing tonight when I get home from work.

Joepro · 02-21-2015, 10:12 PM

Dropping the cats is a must if your looking for HP. Any short ram type intakes are a waste, needs to be long tube like stillen or takedas.

Gregor12 · 02-21-2015, 10:19 PM

Quote:

Originally Posted by Joepro

Dropping the cats is a must if your looking for HP. Any short ram type intakes are a waste, needs to be long tube like stillen or takedas.

This is very true. Another thin I wanted to mention is that I want to look at a few other exhausts and see where the torque went. Because I was very surprised how much it picked up under the whole curve. Esp for torque. Can't just look a Peak numbers. Now just to figure out where the choke point is. either cats or stock intakes. Needless to say, the single flows plenty enough for our cars. And the boosted performance is a 3 inch collector so running it 3 inches out the back, without any transitions or crazy bends, should make good freakin power

Gregor12 · 02-21-2015, 10:23 PM

Also, why wouldn't I be happy haha. I picked up 12rwhp and 8lbft of torque with just a catback. Still have the factory warranty and everything because the cats haven't been touched and the car doesn't need to be tuned

NoLaKrewe · 02-21-2015, 10:24 PM

It's def a good option to go. As far as I know the FI exhaust had the best catback pickup and that was 20 hp and 11 tq. This did around 14 and shaves good amount of weight. The average catback is around this amount of HP

NoLaKrewe · 02-21-2015, 10:26 PM

I think with test pipes, stillens, y pipe and the catback you could see some impressive numbers

Joepro · 02-21-2015, 10:30 PM

here is the FI dyno graph.

Gregor12 · 02-21-2015, 10:33 PM

Idk man. I'm looking around right now and it looks like I've gained a little higher than a few other exhausts. Especially in torque. I'll look around later and get legit comparisons. True on the weight though. The entire exhaust including y pipe weighs 17 to 18 pounds. Also sounds mean AF

Gregor12 · 02-21-2015, 10:35 PM

Yea the FI puts down good power. So weird though. I picked up more across the board but less up top. Look at how my torque curve jumped up 15 lbft early

Joepro · 02-21-2015, 10:40 PM

well overall its a solid performer for sure, dunno what the whole thing cost cause I do not see the y on there site but if they sell it sub 1k I think they will sell a few

NoLaKrewe · 02-21-2015, 10:42 PM

Quote:

Originally Posted by Joepro

well overall its a solid performer for sure, dunno what the whole thing cost cause I do not see the y on there site but if they sell it sub 1k I think they will sell a few

I'd imagine it to be around 1-1.2. Just because the axel back is around 650 and I'd imagine the Y pipe to he between 3 and 5 hundred.

Gregor12 · 02-21-2015, 10:44 PM

The y pipe fits the 350 and 370 so it is the same! I believe its a 1200 dollar setup

NoLaKrewe · 02-21-2015, 10:44 PM

I bet if we can get 5 sold at once they would cut us a break

Gregor12 · 02-21-2015, 10:54 PM

Quote:

Originally Posted by NoLaKrewe

I bet if we can get 5 sold at once they would cut us a break

It never hurts to ask!! More single bros for the win. You won't regret the sound!!!! Lol. Sounds like it eats little children

Gregor12 · 02-21-2015, 11:19 PM

Been looking around and it looks like it performed better than the tanabe, ark, Nismo s-tune, invidia gemini, and the agency power. All duals and 2.5 inch I believe. It's a give or take with the still between torque and power and the FI tDX got it up top. I'd say it gives a lot of people their run for their money haha it sure if I want to keep modding my car though. I just want boost

02-21-2015, 10:12 PM	#182 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Dropping the cats is a must if your looking for HP. Any short ram type intakes are a waste, needs to be long tube like stillen or takedas. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-21-2015, 10:24 PM	#185 (permalink)
NoLaKrewe Enthusiast Member Join Date: Jun 2014 Location: NoLa Posts: 469 Drives: 2011 FJ//2015 370z Rep Power: 12	It's def a good option to go. As far as I know the FI exhaust had the best catback pickup and that was 20 hp and 11 tq. This did around 14 and shaves good amount of weight. The average catback is around this amount of HP __________________ Starting a NoLa Z club https://www.facebook.com/groups/TheBigeZClub/ The struggle will be real!

02-21-2015, 10:26 PM	#186 (permalink)
NoLaKrewe Enthusiast Member Join Date: Jun 2014 Location: NoLa Posts: 469 Drives: 2011 FJ//2015 370z Rep Power: 12	I think with test pipes, stillens, y pipe and the catback you could see some impressive numbers __________________ Starting a NoLa Z club https://www.facebook.com/groups/TheBigeZClub/ The struggle will be real!

02-21-2015, 10:30 PM	#187 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	here is the FI dyno graph. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-21-2015, 10:40 PM	#190 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	well overall its a solid performer for sure, dunno what the whole thing cost cause I do not see the y on there site but if they sell it sub 1k I think they will sell a few NoLaKrewe likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-21-2015, 10:23 PM	#184 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 11	Also, why wouldn't I be happy haha. I picked up 12rwhp and 8lbft of torque with just a catback. Still have the factory warranty and everything because the cats haven't been touched and the car doesn't need to be tuned

02-21-2015, 10:33 PM	#188 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 11	Idk man. I'm looking around right now and it looks like I've gained a little higher than a few other exhausts. Especially in torque. I'll look around later and get legit comparisons. True on the weight though. The entire exhaust including y pipe weighs 17 to 18 pounds. Also sounds mean AF

02-21-2015, 10:35 PM	#189 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 11	Yea the FI puts down good power. So weird though. I picked up more across the board but less up top. Look at how my torque curve jumped up 15 lbft early

02-21-2015, 10:44 PM	#192 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 11	The y pipe fits the 350 and 370 so it is the same! I believe its a 1200 dollar setup

02-21-2015, 10:44 PM	#193 (permalink)
NoLaKrewe Enthusiast Member Join Date: Jun 2014 Location: NoLa Posts: 469 Drives: 2011 FJ//2015 370z Rep Power: 12	I bet if we can get 5 sold at once they would cut us a break David Parra likes this. __________________ Starting a NoLa Z club https://www.facebook.com/groups/TheBigeZClub/ The struggle will be real!

02-21-2015, 11:19 PM	#195 (permalink)
Gregor12 Enthusiast Member Join Date: Oct 2013 Location: CHARLOTTE, NC Posts: 433 Drives: 2012 370z 6mt sport Rep Power: 11	Been looking around and it looks like it performed better than the tanabe, ark, Nismo s-tune, invidia gemini, and the agency power. All duals and 2.5 inch I believe. It's a give or take with the still between torque and power and the FI tDX got it up top. I'd say it gives a lot of people their run for their money haha it sure if I want to keep modding my car though. I just want boost

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3inch single exit exhaust too big for N/A	blacknismoZ	Intake/Exhaust	63	01-27-2016 01:16 PM
New Custom Exhaust Single Exit 3.5''	Megan370z	Intake/Exhaust	28	09-30-2013 08:05 PM
370z Nismo Single exit	1SlowNizzy	Member's 370Z Gallery	30	08-22-2013 03:18 AM
AMUSE R1000 single exit exhaust review	VancouverZ34	Canada	33	03-02-2012 12:44 AM
Single Exit Exhaust	JDW1479	Intake/Exhaust	4	10-26-2010 12:22 AM