HFC Cel Info

2theextreme · 07-01-2009, 08:29 PM

Quote:

Originally Posted by semtex

That second one doesn't look right. There's no graph. Like there are no lines.

Yeah, I noticed that when they gave it to me but I didn't think to queston it. I was there by the car when they dynoed it this afternoon but that was the report they gave me. I expected to see the graph. I'll be heading back to get my coilovers installed in a few weeks....maybe get another dyno and this time if there isn't a graph ask them about it?

semtex · 07-01-2009, 08:38 PM

Quote:

Originally Posted by 2theextreme

Yeah, I noticed that when they gave it to me but I didn't think to queston it. I was there by the car when they dynoed it this afternoon but that was the report they gave me. I expected to see the graph. I'll be heading back to get my coilovers installed in a few weeks....maybe get another dyno and this time if there isn't a graph ask them about it?

Actually . . . you see the little box in the upper left corner? See how in the first chart it's in two shades of blue that correspond to the color of the lines? Now look at the second chart. The box is white. I wonder if the lines are actually there, but in white. And of course, white on white -- can't see it! Ask them if they can email you the .drf files. If they can, I can process them for you in DynoJet software and hopefully change the color so that the lines show up. PM me if you can get a hold of the .drf files.

6MT · 07-01-2009, 08:46 PM

I see that most of the posts regarding this issue are using the Berk HFC's. Has anyone using the Stillen HFC's had the same CEL problems on a 370?

2theextreme · 07-01-2009, 08:53 PM

Quote:

Originally Posted by semtex

Actually . . . you see the little box in the upper left corner? See how in the first chart it's in two shades of blue that correspond to the color of the lines? Now look at the second chart. The box is white. I wonder if the lines are actually there, but in white. And of course, white on white -- can't see it! Ask them if they can email you the .drf files. If they can, I can process them for you in DynoJet software and hopefully change the color so that the lines show up. PM me if you can get a hold of the .drf files.

Cool! I'll send a message to Jon @ Altered along with the pdf of the dyno so he can see what the issue is. I'll let you know if I get the file.

Caravanshaka · 07-01-2009, 09:56 PM

Ya, that graph (or lack of a graph) just doesn't look right.

Just going by the max numbers, it was approximately a 20 hp gain and 14 tq gain, which also doesn't seem right. Most people are seeing that with just 1 of the mods, and are more like 40+ hp to the wheels increase with 3.

6MT · 07-02-2009, 11:07 AM

Anyone....Anyone...?

Quote:

Originally Posted by 6MT

I see that most of the posts regarding this issue are using the Berk HFC's. Has anyone using the Stillen HFC's had the same CEL problems on a 370?

semtex · 07-02-2009, 12:35 PM

6MT, I'm not sure I understand your question. You want to know if anyone with Stillen HFCs has had the same CEL problems on a 370Z. But I'm not aware of anyone who has gotten a CEL on their 370 with the Berk HFCs. So . . . I guess I don't get what you mean by the "same CEL problems" as there doesn't seem to be any such problem. The only one who has gotten a CEL is ssqpolo, but he's running test pipes, not HFCs.

6MT · 07-02-2009, 03:41 PM

OK, I just assumed by reading all the posts that it was the HFC's causing the problem. Maybe the thread should have been titled "Berk Test Pipes" causing CEL issues.

Thanks for clarifying that.

Quote:

Originally Posted by semtex

6MT, I'm not sure I understand your question. You want to know if anyone with Stillen HFCs has had the same CEL problems on a 370Z. But I'm not aware of anyone who has gotten a CEL on their 370 with the Berk HFCs. So . . . I guess I don't get what you mean by the "same CEL problems" as there doesn't seem to be any such problem. The only one who has gotten a CEL is ssqpolo, but he's running test pipes, not HFCs.

JvKintheUSA · 07-26-2009, 07:58 PM

Quote:

Originally Posted by 6MT

OK, I just assumed by reading all the posts that it was the HFC's causing the problem. Maybe the thread should have been titled "Berk Test Pipes" causing CEL issues.

Thanks for clarifying that.

I'm about to have the Stillen HFC and CBE installed this Friday. So excited! Any issues with your set-up so far? Any CEL issues? How's the sound and your impression of the power gains? I see you also have the GEN II intake and sway bars installed. That's exactly the set-up I am looking for.

drisko · 07-30-2009, 03:11 AM

Thought I might share this info:

CobbTuning.com - Nissan AccessPORT Firmware 1.4.0.0

On the new AccessPort firmware, code P0420 (Catalyst Efficiency Code) is defeated for Stage 2 and Stage 2+ maps. I guess this means when they do release a Stage 2 or Stage 2+ map for the 370Z, we will never have to worry about the CEL from HF cats. Maybe I'm missing something, but it seems like this is what it means.

Caravanshaka · 07-30-2009, 06:20 AM

fyi, put on Berk HFC's last Saturday and no CEL, not even before an ECU reset

JvKintheUSA · 08-01-2009, 03:26 AM

Okay, had my Stillen cat back exhaust and Stillen HFC installed yesterday,and so far so good, when it comes to CEL (knock on wood). I disconnected the battery prior to the installation, to clear the ECU. If i ever throw a CEL, I will post.

07-01-2009, 08:46 PM	#18 (permalink)
6MT A True Z Fanatic Join Date: May 2009 Location: ITU Zone 2 Posts: 22,459 Drives: Reliant Robin Rep Power: 1789	I see that most of the posts regarding this issue are using the Berk HFC's. Has anyone using the Stillen HFC's had the same CEL problems on a 370? __________________ Andrew 2009 370Z Sport/Touring 6MT sold 2013 Honda Civic Si coupe D/D

07-02-2009, 12:35 PM	#22 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	6MT, I'm not sure I understand your question. You want to know if anyone with Stillen HFCs has had the same CEL problems on a 370Z. But I'm not aware of anyone who has gotten a CEL on their 370 with the Berk HFCs. So . . . I guess I don't get what you mean by the "same CEL problems" as there doesn't seem to be any such problem. The only one who has gotten a CEL is ssqpolo, but he's running test pipes, not HFCs. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

07-30-2009, 06:20 AM	#26 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	fyi, put on Berk HFC's last Saturday and no CEL, not even before an ECU reset __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JWT Dual POP Charger info	KillerBee370	Intake/Exhaust	8	05-14-2009 12:47 PM
NEED INFO ON THE 5Zigen Proracer SP EXHAUST SYSTEM	dainedazz	Intake/Exhaust	6	05-07-2009 09:23 PM
GTR SpecV Full info and Pics	MC	Other Vehicles	8	01-09-2009 04:59 AM
Need some info.	bossman	The Lounge (Off Topic)	5	01-09-2009 12:28 AM

07-01-2009, 09:56 PM	#20 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	Ya, that graph (or lack of a graph) just doesn't look right. Just going by the max numbers, it was approximately a 20 hp gain and 14 tq gain, which also doesn't seem right. Most people are seeing that with just 1 of the mods, and are more like 40+ hp to the wheels increase with 3.

07-30-2009, 03:11 AM	#25 (permalink)
drisko Base Member Join Date: Jan 2009 Location: So Cal Age: 43 Posts: 160 Drives: 09 370Z PW Tour S 6M Rep Power: 16	Thought I might share this info: CobbTuning.com - Nissan AccessPORT Firmware 1.4.0.0 On the new AccessPort firmware, code P0420 (Catalyst Efficiency Code) is defeated for Stage 2 and Stage 2+ maps. I guess this means when they do release a Stage 2 or Stage 2+ map for the 370Z, we will never have to worry about the CEL from HF cats. Maybe I'm missing something, but it seems like this is what it means.

08-01-2009, 03:26 AM	#27 (permalink)
JvKintheUSA Enthusiast Member Join Date: Jun 2009 Location: Canton, GA Posts: 465 Drives: 2013 Shelby GT500 Rep Power: 427	Okay, had my Stillen cat back exhaust and Stillen HFC installed yesterday,and so far so good, when it comes to CEL (knock on wood). I disconnected the battery prior to the installation, to clear the ECU. If i ever throw a CEL, I will post.