Fast Intentions exhaust is here! (continued)

speedfreek · 10-16-2013, 02:52 PM

I think the best advice Tony gave me when trying to choose between CF and SS is not to focus on the sound so much as both are very close and differs between each individual as to what tones they hear. Instead choose on the look you want. The beautiful sound and craftsmanship is a byproduct. Either way it is a win/win.

Stage · 10-16-2013, 06:52 PM

Quote:

Originally Posted by speedfreek

I think the best advice Tony gave me when trying to choose between CF and SS is not to focus on the sound so much as both are very close and differs between each individual as to what tones they hear. Instead choose on the look you want. The beautiful sound and craftsmanship is a byproduct. Either way it is a win/win.

Totally agree!

For my part I went CF because I didn't want the cops following me to easily focus on shinny SS exhaust

critical · 10-16-2013, 07:02 PM

Quote:

Originally Posted by ZForce

Probably already been answered in the 199 pages of this thread, but I am not going to go thru all 199 pages.

So here goes, Tony, what gaskets are coming with the exhaust and F.I HFC's ?

Do I need to replace any gaskets ? Which are going to be reused if any?

i believe the cats to x-pipe gaskets are reused along with the nuts

F.I. Inc. · 10-17-2013, 07:19 PM

Quote:

Originally Posted by ZForce

Probably already been answered in the 199 pages of this thread, but I am not going to go thru all 199 pages.

So here goes, Tony, what gaskets are coming with the exhaust and F.I HFC's ?

Do I need to replace any gaskets ? Which are going to be reused if any?

My apologies for not answering this sooner. Here is the breakdown below:

FI TP/RTP/HFC/RHFC: 2- 3 Bolt HR Manifold Gaskets / 2- 2 Bolt Gaskets.

FI TDX CBE: 2- 2 Bolt Gaskets / 2- 3 Bolt Gaskets

In the event that you retain stock cats in conjunction with our TDX CBE, reuse the stock 2 bolt gaskets on the bottom of the catalytic converters.

Thanks, Tony

F.I. Inc. · 10-17-2013, 07:23 PM

Quote:

Originally Posted by speedfreek

I think the best advice Tony gave me when trying to choose between CF and SS is not to focus on the sound so much as both are very close and differs between each individual as to what tones they hear. Instead choose on the look you want. The beautiful sound and craftsmanship is a byproduct. Either way it is a win/win.

Well said!

1) The Carbon Fiber is lighter than the Stainless Steel.
2) The Carbon Fiber will emit off a slightly higher pitched exhaust note. (Very minimal and most will not pick up the difference.)
3) The aesthetics of the Carbon Fiber will blend in more and look black at night. The Stainless Steel will attract more attention due to its polished mirror finish.

I always tell customers when choosing one over the other to make it about the aesthetics and take the other two reasons out of the equation. If you love the look of the CF mufflers, it is a great investment. If you are on the fence, save the money and go with the SS mufflers.

Thanks, Tony

critical · 10-17-2013, 10:53 PM

so i can't use my rear diff. jack point with my FI exhaust. i'm using a costco jack. i know other's have said you don't lose this jack point, but in my case I did.

ZForce · 10-17-2013, 11:18 PM

Quote:

Originally Posted by F.I. Inc.

My apologies for not answering this sooner. Here is the breakdown below:

FI TP/RTP/HFC/RHFC: 2- 3 Bolt HR Manifold Gaskets / 2- 2 Bolt Gaskets.

FI TDX CBE: 2- 2 Bolt Gaskets / 2- 3 Bolt Gaskets

In the event that you retain stock cats in conjunction with our TDX CBE, reuse the stock 2 bolt gaskets on the bottom of the catalytic converters.

Thanks, Tony

Thanks, Tony

I am good to go as I am not using stock cats and going with your HFC's. All new bolts and gaskets....yippee

Oh....and I am investing in the CF Canisters. Such a great investment. I am in line within the next 2 weeks for mine to be completed and ready for shipping. .... # 872

MeetZed · 10-18-2013, 09:23 AM

#844, 12" SS CBE!!! The wait is getting worse but its almost over!

jlw2546 · 10-18-2013, 09:50 AM

Quote:

Originally Posted by ZForce

Thanks, Tony

I am good to go as I am not using stock cats and going with your HFC's. All new bolts and gaskets....yippee

Oh....and I am investing in the CF Canisters. Such a great investment. I am in line within the next 2 weeks for mine to be completed and ready for shipping. .... # 872

Do you mean 2 months ? I'm 850 and I'm looking at November 15. Give or take a week.

Rangerz · 10-18-2013, 11:52 AM

Quote:

Originally Posted by jlw2546

Do you mean 2 months ? I'm 850 and I'm looking at November 15. Give or take a week.

I was thinking the same thing. Looks like he had a typo ZForce is #827.

bchinfoon · 10-18-2013, 02:03 PM

Anyone in the current production range 818 - 822ish hear anything recently? I'm #821 and haven't heard anything recently about the status.

F.I. Inc. · 10-18-2013, 02:24 PM

Quote:

Originally Posted by bchinfoon

Anyone in the current production range 818 - 822ish hear anything recently? I'm #821 and haven't heard anything recently about the status.

Shooting to have it in the mail this afternoon!

Thanks, Tony

ZForce · 10-19-2013, 03:03 AM

Quote:

Originally Posted by jlw2546

Do you mean 2 months ? I'm 850 and I'm looking at November 15. Give or take a week.

Quote:

Originally Posted by Rangerz

I was thinking the same thing. Looks like he had a typo ZForce is #827.

^^ ^ thanks guys !

True a typo. My first recollection was #827.....naw...that's too close to the number inproduction. Wow...what a surprise, I just bumped myself 50 spots forward.

Time to clear the garage !

AWIZRD · 10-19-2013, 12:11 PM

Today's install day! Yippee!!!!!

roplusbee · 10-19-2013, 02:03 PM

Quote:

Originally Posted by critical

so i can't use my rear diff. jack point with my FI exhaust. i'm using a costco jack. i know other's have said you don't lose this jack point, but in my case I did.

Can You elaborate a little more on this one. I think I missed this one.......

10-16-2013, 02:52 PM	#2986 (permalink)
speedfreek A True Z Fanatic Join Date: Feb 2012 Location: Huntsville,AL Posts: 1,724 Drives: '12 370Z PW 6sp Rep Power: 18	I think the best advice Tony gave me when trying to choose between CF and SS is not to focus on the sound so much as both are very close and differs between each individual as to what tones they hear. Instead choose on the look you want. The beautiful sound and craftsmanship is a byproduct. Either way it is a win/win. F.I. Inc., kfull and Rangerz like this. __________________ Tomei\|Berk\|Takeda\|ZSpeed\|Fortune Auto\|Swift\|Eibach\|SPL\|Carbotech\|Motul\|Powertrix\|Stillen\|Aerojacket\|Z1\|Forgestar\|Enkei\|Project Kics\|Nismo Ti\|Llumar speedfreek's journal

10-17-2013, 10:53 PM	#2991 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 15	so i can't use my rear diff. jack point with my FI exhaust. i'm using a costco jack. i know other's have said you don't lose this jack point, but in my case I did. luigi90210 likes this. __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

10-18-2013, 02:03 PM	#2996 (permalink)
bchinfoon Base Member Join Date: Oct 2009 Location: Austin, TX Posts: 42 Drives: 2010 Nismo 370Z Rep Power: 15	Anyone in the current production range 818 - 822ish hear anything recently? I'm #821 and haven't heard anything recently about the status. F.I. Inc. likes this.

10-19-2013, 12:11 PM	#2999 (permalink)
AWIZRD Base Member Join Date: Jun 2013 Location: Arizona Posts: 42 Drives: '13 370Z 6MT Sport Rep Power: 11	Today's install day! Yippee!!!!! ZForce and /Angelo350Z/ like this. __________________ 1967 Mustang (ProStreet BBF, 600+ HP) 2001 Porsche 996TT (Sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 03:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 07:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 06:25 PM

10-18-2013, 09:23 AM	#2993 (permalink)
MeetZed Base Member Join Date: Aug 2013 Location: Dallas texas Posts: 6 Drives: '13 370z Pearl 7AT Rep Power: 11	#844, 12" SS CBE!!! The wait is getting worse but its almost over!