Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Intake/Exhaust (http://www.the370z.com/intake-exhaust/)
-   -   Fast Intentions exhaust is here! (continued) (http://www.the370z.com/intake-exhaust/56015-fast-intentions-exhaust-here-continued.html)

Rangerz 11-01-2013 12:18 AM

Damn had to watch it again. What did you take the video and audio with?

That sounds great

what about power? Did you notice a big difference

Sh0velMan 11-01-2013 06:50 AM

Suppose I can post this here..

FI non-res with PPE LTH.

http://www.youtube.com/watch?v=bwBwKkOsaJo

1cleanZ 11-01-2013 10:52 AM

Quote:

Originally Posted by Rangerz (Post 2550245)
Goddamnit Clean Z..... I think I just jizzed my pants. That sounds awesome really, really like the tone and grumble.

Hey in that second video.....I think your going just a little overboard driving around the planet for the WOT run.:ugh2::ugh2::ugh2:

Quote:

Originally Posted by Rangerz (Post 2550249)
Damn had to watch it again. What did you take the video and audio with?

That sounds great

what about power? Did you notice a big difference

Thanks bro! :tup: I couldn't be happier with the tone. The sound definition of the non-resonated X is just amazing, and the Resonated HFCs just adds to it rather then taking anything away from the perfect tone.

The largest differences I noticed immediately with power, the shifts are soooo much easier and smoother since the rev limiter doesn't drop as quickly. I had previous experience with my G37 and my FI combo, but when I bought my Nismo, I immediately noticed the lack of low end. The SECOND I drove the car out of my garage after completing the install, the low end TQ was back which resulted in my rev's being that much quicker to shift.

The video was shot with a digital camera just sitting on the ground. I located the spot I wanted record it quite a while ago, perrrrfect for avoiding sound distortion. Its almost a valley which really assisted in being able to hear everything from miles away.

johncarlopang 11-01-2013 11:15 PM

Hi FI owners... can you enlighten me about Mr. Tony's product compare to other exhaust out there... :) why is his exhaust way way way better than others. :) Thanks guys

40th_z 11-01-2013 11:16 PM

just got my tracking number!!!! #830 should be here mid week. :happydance:

MadChemist 11-01-2013 11:20 PM

Quote:

Originally Posted by johncarlopang (Post 2551747)
Hi FI owners... can you enlighten me about Mr. Tony's product compare to other exhaust out there... :) why is his exhaust way way way better than others. :) Thanks guys

Surely after 41 posts you can use the search feature. Not being an ***, just being real.

johncarlopang 11-02-2013 12:01 AM

Quote:

Originally Posted by MadChemist (Post 2551752)
Surely after 41 posts you can use the search feature. Not being an ***, just being real.


bro, i heard clips of diff exhaust for 370z. thats why im asking nice what makes him top of the notch :tiphat:

Felix 808 11-02-2013 12:20 AM

Quote:

Originally Posted by johncarlopang (Post 2551747)
Hi FI owners... can you enlighten me about Mr. Tony's product compare to other exhaust out there... :) why is his exhaust way way way better than others. :) Thanks guys

All you've got to do is read back pretty much anywhere thru this thread & you'll see that the exceptional quality fit & finish combined unmatched customer service & some of the highest CBE gains with multiple options puts F.I. at the top of so many people's list. ;)

johncarlopang 11-02-2013 02:17 AM

Quote:

Originally Posted by Felix 808 (Post 2551796)
All you've got to do is read back pretty much anywhere thru this thread & you'll see that the exceptional quality fit & finish combined unmatched customer service & some of the highest CBE gains with multiple options puts F.I. at the top of so many people's list. ;)

Thanks Felix :tiphat:

megalapagas 11-02-2013 05:43 AM

All i have to say is WOW :0........ do u have the 300 cell plus the resonator or jist the 300 cell on your RHFC? Im really digging these HFC but how different is it from my NRTP?

Quote:

Originally Posted by 1cleanZ (Post 2550094)
Few exhaust vids from tonight...

COLD START(and yes, actually COLD, temp was about 43 degrees >>excuse the clutch/flywheel chatter)

http://www.youtube.com/watch?v=bqFNgooTrds


Acceleration Vids (first pull to 3500rpms, 2nd pull WOT)

http://www.youtube.com/watch?v=QztxIHy5Kog


megalapagas 11-02-2013 05:43 AM

Plus that setup you got there is ORGASMIC man!!^^

NORAIN 11-04-2013 03:38 PM

Ok... now I see what it's like when your number's almost up.:eek:
Who's gotten a call with a tracking # recently?

MeetZed 11-05-2013 01:39 PM

I'm #844 and nothing yet. I think time is actually slowing down...

Rangerz 11-05-2013 02:46 PM

I'm 835. Mine will ship this Fri.

NORAIN 11-05-2013 03:31 PM

Thanks. I'm #853, so 2-3 weeks is my guess. Lemme know when you hear something Meetzed. So I can do my calculating...

MeetZed 11-05-2013 04:33 PM

Will do :tup:

Rangerz 11-05-2013 06:18 PM

Quote:

Originally Posted by NORAIN (Post 2556494)
Thanks. I'm #853, so 2-3 weeks is my guess. Lemme know when you hear something Meetzed. So I can do my calculating...

I think your looking at about 4 to 5 syztems a week. My window is 4-18 Nov so Tony hit centermass on that. I would go with the dates Tony gave you, they seem pretty solid to me.

Also remember he builds exhausts for other types of cars and has built what looks like one of the top TT systems available.

jlw2546 11-05-2013 07:53 PM

Quote:

Originally Posted by Rangerz (Post 2556680)
I think your looking at about 4 to 5 syztems a week. My window is 4-18 Nov so Tony hit centermass on that. I would go with the dates Tony gave you, they seem pretty solid to me.

Also remember he builds exhausts for other types of cars and has built what looks like one of the top TT systems available.

Hey, Ranger it appears that will have the same setup as me. Are you going to post some audio. Man I can't wait for this exhaust to get here.

Rangerz 11-05-2013 09:46 PM

Quote:

Originally Posted by jlw2546 (Post 2556794)
Hey, Ranger it appears that will have the same setup as me. Are you going to post some audio. Man I can't wait for this exhaust to get here.

Yep sure intend to. Should have something by next Friday if everything goes as planned.

Luciano13 11-07-2013 05:16 PM

Quote:

Originally Posted by johncarlopang (Post 2551785)
bro, i heard clips of diff exhaust for 370z. thats why im asking nice what makes him top of the notch :tiphat:

because of this:tiphat:
http://www.youtube.com/watch?v=BqZgLOo8P3Q

Luciano13 11-07-2013 05:18 PM

Quote:

Originally Posted by johncarlopang (Post 2551785)
bro, i heard clips of diff exhaust for 370z. thats why im asking nice what makes him top of the notch :tiphat:

and this:driving:
http://www.youtube.com/watch?v=W3wGvs_Yr-g

Super Werty 11-07-2013 05:36 PM

Where you on jackstands in the last vid?

ZForce 11-08-2013 12:41 PM

Hey Tony, I am getting rattling from the difuser. Does it look like the exhaust fitment is right? I have the EVO-R difuser.


https://lh3.googleusercontent.com/-D...1108130636.jpg

https://lh3.googleusercontent.com/-0...1108130637.jpg


https://lh5.googleusercontent.com/-J...108130637a.jpg

https://lh6.googleusercontent.com/-J...108130637b.jpg


https://lh4.googleusercontent.com/-q...1108130638.jpg

wackjum 11-08-2013 12:50 PM

I would say it is too close. Needs a little bit of a gap. You will need to add some washers to each of the screws on the hanging bracket.

ZForce 11-08-2013 01:13 PM

^ Thanks, my mechanic was thinking the same. Just checking with the guru - Tony to ensure we do not have to disassemble the entire exhaust system and start over. We did follow the instructions.

F.I. Inc. 11-08-2013 01:20 PM

Quote:

Originally Posted by ZForce (Post 2560836)
^ Thanks, my mechanic was thinking the same. Just checking with the guru - Tony to ensure we do not have to disassemble the entire exhaust system and start over. We did follow the instructions.

You need to space the tips down to create clearance between the top of them and the diffuser. It should not take much. There is no need to loosen the exhaust system to do this.

Thanks, Tony

ZForce 11-08-2013 02:00 PM

Quote:

Originally Posted by F.I. Inc. (Post 2560848)
You need to space the tips down to create clearance between the top of them and the diffuser. It should not take much. There is no need to loosen the exhaust system to do this.

Thanks, Tony

Thanks Tony :tiphat:

Luciano13 11-08-2013 02:06 PM

Quote:

Originally Posted by Super Werty (Post 2559707)
Where you on jackstands in the last vid?

no no it wAS on a dyno. because of the body kit with no spacers, they had to slightly lift the one side so it wouldn't rub:tiphat:

Rangerz 11-08-2013 08:54 PM

FYI everyone tracking ypor systems. #835 shipped today:happydance:

I will install it Tuesday night when it arrives.

wackjum 11-08-2013 09:21 PM

Quote:

Originally Posted by Rangerz (Post 2561589)
FYI everyone tracking ypor systems. #835 shipped today:happydance:

I will install it Tuesday night when it arrives.

#836 buddy. :tup: Mine shipped too.

NORAIN 11-09-2013 06:45 AM

Thanks for the updates.

exsanity 11-13-2013 02:19 AM

How do you know what number your system is down the list?

F.I. Inc. 11-13-2013 02:40 AM

Quote:

Originally Posted by exsanity (Post 2566716)
How do you know what number your system is down the list?

On your invoice under PO I put your build number. Right side of the invoice about 1/3 of the way down.

Thanks, Tony

exsanity 11-13-2013 03:44 AM

#884!
Got it, wewt!

Rangerz 11-17-2013 02:19 AM

This is a little video of a lap out at Miller Motor Sports park today. Raining with periods of snow falling this morning with a few breaks in the weather.

The event is run as a one lap time attack with two groups alternating every 30 min. We had 2 morning practice sessions then after lunch 2 afternoon sessions to determine the winners for each group. It was allot of fun but, you really had to tip toe around to keep from sliding out. The run on the video was of the driest of the day and the spin at the end was from my first practice session.

I just installed the Fast Intentions HFC's and a 12" resonated TDX with the CF cans. I can honestly say that I had the best sounding exhaust today. While I'm sure others are good as well I have this one so it's the best :tup: Thought this would give you guys yet another video to listen to while you wait for your systems.:tiphat:

http://www.youtube.com/watch?v=Q40QyOAjIzY

megalapagas 11-17-2013 03:40 AM

Sounds Beefy Man! Nive Video and very Great Clear Sound too :tup:

Super Werty 11-17-2013 09:27 AM

no other mods? mic position? sounds good!:tup:

wackjum 11-17-2013 11:24 AM

I just installed mine yesterday.

I have a sport+touring 7AT. My mods are K&N drop-ins, MAF tubes, and now the TDX 18" with CF resonators. I have a light touch from riding motorcycles and I can tell there is a definite power increase. Coming out of my neighborhood, I am used to a specific amount of gas to get me to the center median and the car surprised me when it moved a lot quicker than I am used to.

I have some professional recording equipment. I will try to get a good sound clip sometime next weekend for others to reference my specific setup.

One more thing, looking at RangerZ, I'm amused at how similarly we're both setup. We both have similar mods, near similar TDX orders (CF cans with resonators, but he has 12" and I have 18") and we were one digit away from one another in the orders. :tup:

wackjum 11-17-2013 11:31 AM

Oh yeah one more thing. I have noticed a definite increase in ghetto racer's attentions.

3 cars alone tried to race me on a 4 mile stretch of road as I was going from my house to the grocery store last night:

A first gen Toyota Avalon, a 4th gen Honda Prelude, and a Scion TC. They were doing the most obnoxious things to try and trigger a race; something I have not experienced in the Z all these years of ownership. And then they'd storm off or cut me off violently when I didn't respond. So if there's a downside to the exhaust so far, this would be it.

jlw2546 11-17-2013 03:04 PM

After hearing these exhausts again I am getting so impatient. Tony, C'mon man. Hook a brotha up early. My Z is way to quiet. I'm ready to wake up the neighbors.


All times are GMT -5. The time now is 03:35 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2