Fast Intentions exhaust is here! (continued)

XwChriswX · 11-02-2012, 03:12 PM

Quote:

Originally Posted by chrisbeltre

Got 560 installed today, jesus lord is awesome. Only thing is my right tip is touching on the right side. Any idea on how to correct that?

Slide up under it and push the hanger bar through the rubber holder a bit. If it won't stay put, try throwing a ring clamp on the inside to hold it in place.

sparky · 11-02-2012, 08:36 PM

Quote:

Originally Posted by chrisbeltre

Got 560 installed today, jesus lord is awesome. Only thing is my right tip is touching on the right side. Any idea on how to correct that?

I posted on this awhile back in this thread. The alignment is very sensitive to the x pipe being level and loosening and twisting the can connection to the resonator. Try to have someone help you with alignment as its hard to do alone. Mine were badly aligned at first but I managed to get them bang on so it can be done. As you adjust it make sure the last hanger rubber is not holding things up, no other clamps should be needed.
Good luck.

djtodd · 11-03-2012, 07:15 PM

You can also add a few washers between the hanger bracket bolts and the body to lower the tip in question

henryy370z · 11-04-2012, 07:03 PM

anyone have coils how low can you go with this exhaust?

SA370 · 11-04-2012, 08:22 PM

At least as low as you can with stock exhaust. There is slightly more ground clearance with FI than stock. Hope that helps.

XwChriswX · 11-05-2012, 10:38 AM

Quote:

Originally Posted by henryy370z

anyone have coils how low can you go with this exhaust?

I'm on K&W v3's dropped 1" all around, and do not scrape anywhere on my exhaust. Just take any questionable grade/bump with angled driving and slow speeds and you'll be okay.

SA370 · 11-05-2012, 02:03 PM

exhaust has been delivered to the shop. 10am appointment for install and uprev tune...cant wait.

norm · 11-05-2012, 06:55 PM

Quote:

Originally Posted by SA370

exhaust has been delivered to the shop. 10am appointment for install and uprev tune...cant wait.

Does anyone know what the count is?

SA370 · 11-05-2012, 08:11 PM

I was 593 and it shipped Thursday the 1st, so maybe 594-595?

dmhenderson · 11-06-2012, 08:13 AM

So close...soooo close.

ubs234 · 11-06-2012, 02:07 PM

Is Fast Intentions even carb legal? Will it pass smog? or visual? or sniffer test? I really want to purchase one, but this is holding me back from it.

binary0x01 · 11-06-2012, 02:12 PM

The answer is 'yes'. But remember this is an internet forum, so calling Tony at his place of business would probably be the best thing to do.

SA370 · 11-06-2012, 03:00 PM

Just got home....6mt car with r2c intake, FI test pipes, 18"inch res carbon fiber CBE....315rwhp & 258rwtq uprev tuned. Special thanks to FI for their great products and JMS for install and tune. Could not be happier

apatter8 · 11-06-2012, 05:48 PM

Finally placed my order today. Great service as expected, thanks Tony.

Z-Girl 12 · 11-06-2012, 06:14 PM

Quote:

Originally Posted by henryy370z

anyone have coils how low can you go with this exhaust?

I'm on BC BR's dropped an inch all the way around and havent scraped at all. I'm jus conscious about driveways, dips etc. Still enjoy this sik exhaust! Sooo tempted to do LTH.

11-03-2012, 07:15 PM	#1023 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3399	You can also add a few washers between the hanger bracket bolts and the body to lower the tip in question __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

11-05-2012, 02:03 PM	#1027 (permalink)
SA370 Base Member Join Date: Jun 2012 Location: San Antonio, TX Posts: 214 Drives: 12 370Z PW 6MT Rep Power: 14	exhaust has been delivered to the shop. 10am appointment for install and uprev tune...cant wait. faya likes this.

11-06-2012, 08:13 AM	#1030 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 28	So close...soooo close. EverGreatest likes this. __________________

11-06-2012, 02:12 PM	#1032 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 15	The answer is 'yes'. But remember this is an internet forum, so calling Tony at his place of business would probably be the best thing to do. __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 03:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 07:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 06:25 PM

11-04-2012, 07:03 PM	#1024 (permalink)
henryy370z Enthusiast Member Join Date: May 2012 Location: nj bergen county Age: 34 Posts: 380 Drives: 2011-black-manual Rep Power: 15	anyone have coils how low can you go with this exhaust?

11-04-2012, 08:22 PM	#1025 (permalink)
SA370 Base Member Join Date: Jun 2012 Location: San Antonio, TX Posts: 214 Drives: 12 370Z PW 6MT Rep Power: 14	At least as low as you can with stock exhaust. There is slightly more ground clearance with FI than stock. Hope that helps.

11-05-2012, 08:11 PM	#1029 (permalink)
SA370 Base Member Join Date: Jun 2012 Location: San Antonio, TX Posts: 214 Drives: 12 370Z PW 6MT Rep Power: 14	I was 593 and it shipped Thursday the 1st, so maybe 594-595?

11-06-2012, 02:07 PM	#1031 (permalink)
ubs234 Enthusiast Member Join Date: Oct 2012 Location: Covina Posts: 258 Drives: 2011 Nissan 370z Rep Power: 14	Is Fast Intentions even carb legal? Will it pass smog? or visual? or sniffer test? I really want to purchase one, but this is holding me back from it.

11-06-2012, 03:00 PM	#1033 (permalink)
SA370 Base Member Join Date: Jun 2012 Location: San Antonio, TX Posts: 214 Drives: 12 370Z PW 6MT Rep Power: 14	Just got home....6mt car with r2c intake, FI test pipes, 18"inch res carbon fiber CBE....315rwhp & 258rwtq uprev tuned. Special thanks to FI for their great products and JMS for install and tune. Could not be happier

11-06-2012, 05:48 PM	#1034 (permalink)
apatter8 Base Member Join Date: Apr 2012 Location: Chattanooga, TN Posts: 106 Drives: 09 370Z Sport 6MT Rep Power: 15	Finally placed my order today. Great service as expected, thanks Tony.