Fast Intentions exhaust is here! (continued)

Nubz · 07-02-2012, 04:53 PM

Quote:

Originally Posted by NickD

Anyone know why FI's phone number doesn't work?

It changed. When you call the old number, the message tells you the new number. But the new number is 805-522-3278

Z-Girl 12 · 07-02-2012, 07:51 PM

Quote:

Originally Posted by DarkPath

UPS Tracking update - Build 529 - 07/02/2012 6:38 A.M. Out For Delivery

Say it with me one time.... SWEET!

Darkpath! How did you jump me I'm #527 no tracking info for me...

well enjoy. I will be patient.

Huck · 07-02-2012, 11:04 PM

Quote:

Originally Posted by speedfreek

May be moving the phone over to the new place...I dunno.

Huck thanks for the vids. Have to check the other one out after work. Waiting on the pics.

Lol totally forgot to take pics, I've been a bit distracted with driving it

also today I just put my stillen crank pulley on so that was fun. Took me about two hours cause I've never done it before and I triple checked every step to make sure I didn't mess anything up, and I had to improvise on certain parts for lack of the right tools. Anyways, I'll try to get pics for you tomorrow. All I have is my iPhone to take them though, so I'm not sure how good they'll come out.

Sent from my iPizzle using magic and new-fangled science stuff

Huan'z · 07-03-2012, 07:53 AM

Huck! 2 hours for the pulley??? I don't even think about installing it by myself. Lol! Do u have to angle when installing or something like that?

Sent from my iPhone using Tapatalk

DCNISMO · 07-03-2012, 11:52 AM

Got mine installed today at P Tuning and a dyno pull. Sounds great but the high heat and humidity sapped my peak power. It's at least 10 degrees hotter and much more humid than last time.

Huck · 07-03-2012, 12:00 PM

No not really, it's just that I really went slow to make sure I didn't mess anything up. I took my bumper off even though you don't have to. The basic steps are:
1. Take off your radiator reservoir.
2. Take off your radiator fan assembly
3. Use a 3/8 ratchet with an extender on the handle for more leverage on the tensioner
4. Put a pry bar in the oem pulley to keep it from turning
5. Loosen crank pulley bolt and remove pulley
6. Install new one and tighten to 33 ft/lbs.
7. Release tensioner and check that the belt is sitting correctly in all the pulley grooves.
8. Replace radiator fan assembly and fluid reservoir, then bumper.
9. Double check all tubes, hoses, wire connectors etc are reattached
10. Drive it like you stole it.

If anyone has another questions you can pm me. Here's some pics of the exhaust...

Again all these pics are from my iPhone, sorry for the quality.

Sent from my iPizzle using magic and new-fangled science stuff

reldas · 07-04-2012, 06:14 PM

Hey Tony,

please reply to my email about ordering, really need this exhaust thanks

sparky · 07-04-2012, 06:47 PM

Quote:

Originally Posted by reldas

Hey Tony,

please reply to my email about ordering, really need this exhaust thanks

You could wait a while for a response, I think he gets a lot of mail.
Best is to call him that way you get the personal Tony service!

Huck · 07-04-2012, 08:56 PM

phone is much easier.

Sent from my iPizzle using magic and new-fangled science stuff

TerribleONE · 07-05-2012, 10:02 AM

Yea give him a call, I know Tony has a hard time getting to all his emails!

Huck · 07-05-2012, 08:00 PM

Alright guys! Here's the second half of my order from Tony, I'm sad cause I don't get to install them for another week and a half. Anyway, on to the pics!

Mini is curious

Mini approves

I approve

Close ups of the welds...

Enjoy! I'm dying to put them on, I'm going to be going stir crazy in Texas!

Sent from my iPizzle using magic and new-fangled science stuff

Huan'z · 07-05-2012, 09:34 PM

Quality spot right away.

Sent from my iPhone using Tapatalk

Huan'z · 07-05-2012, 09:34 PM

Let me know how u feel about headers. I'm planning on headers too!

Sent from my iPhone using Tapatalk

XwChriswX · 07-05-2012, 10:58 PM

Quote:

Originally Posted by Huan'z

Let me know how u feel about headers. I'm planning on headers too!

Sent from my iPhone using Tapatalk

I love mine.

djtodd · 07-06-2012, 11:16 AM

Talked to Tony & Nick today. Those guys are totally slammed, but that's a good thing!

Super nice & responsive though. Can't wait!

07-03-2012, 12:00 PM	#336 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	No not really, it's just that I really went slow to make sure I didn't mess anything up. I took my bumper off even though you don't have to. The basic steps are: 1. Take off your radiator reservoir. 2. Take off your radiator fan assembly 3. Use a 3/8 ratchet with an extender on the handle for more leverage on the tensioner 4. Put a pry bar in the oem pulley to keep it from turning 5. Loosen crank pulley bolt and remove pulley 6. Install new one and tighten to 33 ft/lbs. 7. Release tensioner and check that the belt is sitting correctly in all the pulley grooves. 8. Replace radiator fan assembly and fluid reservoir, then bumper. 9. Double check all tubes, hoses, wire connectors etc are reattached 10. Drive it like you stole it. If anyone has another questions you can pm me. Here's some pics of the exhaust... Again all these pics are from my iPhone, sorry for the quality. Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

07-04-2012, 08:56 PM	#339 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	phone is much easier. Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

07-05-2012, 10:02 AM	#340 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Yea give him a call, I know Tony has a hard time getting to all his emails! __________________ 638WHP 541WTQ @ 13.5PSI Build thread

07-05-2012, 08:00 PM	#341 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 41 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Alright guys! Here's the second half of my order from Tony, I'm sad cause I don't get to install them for another week and a half. Anyway, on to the pics! Mini is curious Mini approves I approve Close ups of the welds... Enjoy! I'm dying to put them on, I'm going to be going stir crazy in Texas! Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 03:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 07:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 06:25 PM

07-03-2012, 07:53 AM	#334 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 16	Huck! 2 hours for the pulley??? I don't even think about installing it by myself. Lol! Do u have to angle when installing or something like that? Sent from my iPhone using Tapatalk

07-03-2012, 11:52 AM	#335 (permalink)
DCNISMO Track Member Join Date: Nov 2011 Location: washington dc Posts: 995 Drives: Nismo Z Rep Power: 178	Got mine installed today at P Tuning and a dyno pull. Sounds great but the high heat and humidity sapped my peak power. It's at least 10 degrees hotter and much more humid than last time.

07-04-2012, 06:14 PM	#337 (permalink)
reldas Base Member Join Date: Aug 2011 Location: Sydney Posts: 144 Drives: 09 Nissan 370z auto Rep Power: 13	Hey Tony, please reply to my email about ordering, really need this exhaust thanks

07-05-2012, 09:34 PM	#342 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 16	Quality spot right away. Sent from my iPhone using Tapatalk

07-05-2012, 09:34 PM	#343 (permalink)
Huan'z Track Member Join Date: Apr 2010 Location: houston,texas Posts: 641 Drives: black 370z 7/AT. Rep Power: 16	Let me know how u feel about headers. I'm planning on headers too! Sent from my iPhone using Tapatalk

07-06-2012, 11:16 AM	#345 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	Talked to Tony & Nick today. Those guys are totally slammed, but that's a good thing! Super nice & responsive though. Can't wait!