New Style Takeda Attack Intakes $400 - Got mine!

DarkJak · 06-26-2012, 11:10 PM

Quote:

Originally Posted by Ni55anPat

autoanything sent an email today.....they are shipping out today, with 2 day shipping....yay

Nice!

I still haven't gotten an email. I'll have to call them tomorrow during the day.

I wish there were more independent dyno results too. The manufacturer provided one looked a little too good to be true, with a beefy gain in lower rpms too, which is unusual for an intake.

RUFFSTUFF · 06-27-2012, 04:39 AM

A knowledgeable dyno operator can get a 10hp increase from a set of LED dome lights... Just be happy you spent $400 on new shiny parts and a couple of stickers...

MacLean · 06-27-2012, 07:49 AM

Quote:

Originally Posted by RUFFSTUFF

A knowledgeable dyno operator can get a 10hp increase from a set of LED dome lights... Just be happy you spent $400 on new shiny parts and a couple of stickers...

Well if you spent $400, then you will get 20whp w/o a doubt. Oh if one just puts 35psi he or she gets 2.5whp.

DarkJak · 07-04-2012, 12:25 AM

So I finally installed the intakes yesterday and they look great and sound great. It's been too long since I drove the car much so I couldn't honestly say if they added any power, but gear changes have spun wheels more than they used to, although this may be attributed to my soon-to-be-bald tires.

However, I have one major concern, probably not intake related. After resetting the ECU, the transmission is behaving strangely during shifting. In higher gears, 4,5,6, and 7, the transmission no longer seems to be fully locking. For example, the rpms will drop down to ~1k after shifting up to 5th, and then when I gas it, it would rise up to ~3.5k, above where it should be for the speed, and then drop back down once I let go, sometimes to where it should be (let's say around 2.5k) sometimes back to ~1k.

The downshift rev matching also isn't activating in higher gears. Instead of popping up when downshifting to 3,4, or 5, it would just slowly climb back up. This, and the upshift won't snap into gear as fast as they used to.

Anyone know if this is just because of the ECU reset and that this would fix itself after a while? Or did I mess something up during the install?

RUFFSTUFF · 07-04-2012, 05:55 AM

Quote:

Originally Posted by DarkJak

So I finally installed the intakes yesterday and they look great and sound great. It's been too long since I drove the car much so I couldn't honestly say if they added any power, but gear changes have spun wheels more than they used to, although this may be attributed to my soon-to-be-bald tires.

However, I have one major concern, probably not intake related. After resetting the ECU, the transmission is behaving strangely during shifting. In higher gears, 4,5,6, and 7, the transmission no longer seems to be fully locking. For example, the rpms will drop down to ~1k after shifting up to 5th, and then when I gas it, it would rise up to ~3.5k, above where it should be for the speed, and then drop back down once I let go, sometimes to where it should be (let's say around 2.5k) sometimes back to ~1k.

The downshift rev matching also isn't activating in higher gears. Instead of popping up when downshifting to 3,4, or 5, it would just slowly climb back up. This, and the upshift won't snap into gear as fast as they used to.

Anyone know if this is just because of the ECU reset and that this would fix itself after a while? Or did I mess something up during the install?

You didn't drink enough beer during the install. Now you have to drive the car more so the ECU can relearn...

hnf25 · 07-04-2012, 11:37 PM

Wheres the maf sensor?

RUFFSTUFF · 07-05-2012, 06:47 AM

Quote:

Originally Posted by hnf25

Wheres the maf sensor?

On the underside of the tubes where the diameter gets smaller.

Gauge · 07-05-2012, 08:19 AM

What is the significance, in terms of performance, of where vendors put the sensor. Either close or farther, and wide or narrow?

RUFFSTUFF · 07-05-2012, 10:10 AM

Quote:

Originally Posted by Gauge

What is the significance, in terms of performance, of where vendors put the sensor. Either close or farther, and wide or narrow?

I'm not sure about the other brands, but with the Takeda it forces panties to drop on 50% throttle or greater. So ladies, encourage your guys to wear boxers because tighty whities dropping is apparently not pretty.

Individual results may vary.

Quietkhaos · 07-06-2012, 09:57 PM

probably said already and pretty obvious answer but just checking... do u have to remove the bumper to clean or remove the filter during any maintainance???

MacLean · 07-06-2012, 10:50 PM

Quote:

Originally Posted by Quietkhaos

probably said already and pretty obvious answer but just checking... do u have to remove the bumper to clean or remove the filter during any maintainance???

I am more than sure you do. The filter is good for 15-20k miles from what the man guy said (rep). Clean it after 15-20k miles & you do not have to use oil like the K&N & Gen 3 filters.

RUFFSTUFF · 07-07-2012, 06:10 AM

Quote:

Originally Posted by Quietkhaos

probably said already and pretty obvious answer but just checking... do u have to remove the bumper to clean or remove the filter during any maintainance???

Once installed, you can barely see it let alone get to it. Bumper removal is required.

ZKdoggZ · 07-28-2012, 10:57 AM

Quote:

Originally Posted by DarkJak

So I finally installed the intakes yesterday and they look great and sound great. It's been too long since I drove the car much so I couldn't honestly say if they added any power, but gear changes have spun wheels more than they used to, although this may be attributed to my soon-to-be-bald tires.

However, I have one major concern, probably not intake related. After resetting the ECU, the transmission is behaving strangely during shifting. In higher gears, 4,5,6, and 7, the transmission no longer seems to be fully locking. For example, the rpms will drop down to ~1k after shifting up to 5th, and then when I gas it, it would rise up to ~3.5k, above where it should be for the speed, and then drop back down once I let go, sometimes to where it should be (let's say around 2.5k) sometimes back to ~1k.

The downshift rev matching also isn't activating in higher gears. Instead of popping up when downshifting to 3,4, or 5, it would just slowly climb back up. This, and the upshift won't snap into gear as fast as they used to.

Anyone know if this is just because of the ECU reset and that this would fix itself after a while? Or did I mess something up during the install?

Have you figured out what the problem was, or did the car adjust itself??

DarkJak · 07-28-2012, 01:45 PM

It seems like the car adjusted itself, although this took about 500 miles for it to get back to its old aggression. I'm definitely not going to reset after I put an exhaust on. 500 miles just takes far too long to readjust the transmission programming.

ZKdoggZ · 07-31-2012, 04:03 AM

For anyone looking for these should get them now. I checked everywhere and most places are sold out.

06-27-2012, 04:39 AM	#107 (permalink)
RUFFSTUFF Base Member Join Date: Apr 2012 Location: GEORGIA Posts: 233 Drives: 2012 370Z TOURING Rep Power: 13	A knowledgeable dyno operator can get a 10hp increase from a set of LED dome lights... Just be happy you spent $400 on new shiny parts and a couple of stickers... __________________ 2012 370Z Touring w/ NAV, Black Powdercoat, aFe Takeda CAI, Invidia Gemini Ti-tip Catback Exhaust, DVD/NAV bypass

07-05-2012, 08:19 AM	#113 (permalink)
Gauge Track Member Join Date: Sep 2011 Location: Madison WI Posts: 867 Drives: 2012 370Z Nismo PW Rep Power: 14	What is the significance, in terms of performance, of where vendors put the sensor. Either close or farther, and wide or narrow? __________________ I am a demon bolt slayer.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blowing out Takeda intakes!!! Only @ IIR*********************************************	ImportImage	Exhaust/Intake	174	07-16-2014 02:51 PM
Takeda Short Ram intakes	toxik	North East Region	0	05-13-2011 11:28 PM
FS: Takeda Intakes	JB1	Parts for sale (Private Classifieds)	24	03-31-2010 10:56 AM
Takeda intakes and Scangauge info	JB1	Intake/Exhaust	11	01-26-2010 11:48 PM

07-04-2012, 12:25 AM	#109 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,391 Drives: 2009 370Z Rep Power: 13448	So I finally installed the intakes yesterday and they look great and sound great. It's been too long since I drove the car much so I couldn't honestly say if they added any power, but gear changes have spun wheels more than they used to, although this may be attributed to my soon-to-be-bald tires. However, I have one major concern, probably not intake related. After resetting the ECU, the transmission is behaving strangely during shifting. In higher gears, 4,5,6, and 7, the transmission no longer seems to be fully locking. For example, the rpms will drop down to ~1k after shifting up to 5th, and then when I gas it, it would rise up to ~3.5k, above where it should be for the speed, and then drop back down once I let go, sometimes to where it should be (let's say around 2.5k) sometimes back to ~1k. The downshift rev matching also isn't activating in higher gears. Instead of popping up when downshifting to 3,4, or 5, it would just slowly climb back up. This, and the upshift won't snap into gear as fast as they used to. Anyone know if this is just because of the ECU reset and that this would fix itself after a while? Or did I mess something up during the install?

07-04-2012, 11:37 PM	#111 (permalink)
hnf25 Base Member Join Date: Jul 2012 Location: bsb Posts: 2 Drives: 09 370z m6 Rep Power: 12	Wheres the maf sensor?

07-06-2012, 09:57 PM	#115 (permalink)
Quietkhaos Base Member Join Date: May 2012 Location: SA Posts: 46 Drives: 2012 Nissan 370z b m Rep Power: 12	probably said already and pretty obvious answer but just checking... do u have to remove the bumper to clean or remove the filter during any maintainance???

07-28-2012, 01:45 PM	#119 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,391 Drives: 2009 370Z Rep Power: 13448	It seems like the car adjusted itself, although this took about 500 miles for it to get back to its old aggression. I'm definitely not going to reset after I put an exhaust on. 500 miles just takes far too long to readjust the transmission programming.

07-31-2012, 04:03 AM	#120 (permalink)
ZKdoggZ Base Member Join Date: May 2012 Location: Dallas Posts: 98 Drives: 2012 370Z 7AT PW Rep Power: 12	For anyone looking for these should get them now. I checked everywhere and most places are sold out.