Quick question

doublea2527 · 08-23-2011, 11:34 AM

I have the Fast Intentions exhaust and just ordered the Stillen Gen 3 intakes. When I put the intakes on, will it be absolutely necessary to get a tune or do you think it will be fine. I will be getting a tune in the future, but just don't have the means to right now and don't want to be too leaned out.

doublea2527 · 08-24-2011, 03:37 AM

Nobody has the answer to this?

90 ST · 08-24-2011, 04:47 AM

you should be fine, but get a tune sooner then later. i have G3 intakes and a CNT CBE, no tune, yet.

JC671 · 08-24-2011, 09:09 AM

No tune nesseceary unless your anal about extracting every bit of power. Honestly if your gonna continue modding with N/A mods. Get all the bolt ons them pay for a tune. Rather than mod, tune, mod, tune... It gets costly if you do it like that.

somatic · 08-24-2011, 09:12 AM

Quote:

Originally Posted by JC671

No tune nesseceary unless your anal about extracting every bit of power. Honestly if your gonna continue modding with N/A mods. Get all the bolt ons them pay for a tune. Rather than mod, tune, mod, tune... It gets costly if you do it like that.

Methodical4u · 08-24-2011, 12:23 PM

Quote:

Originally Posted by somatic

I second... not that much power that comes from a tune... but it might get you a little better mileage overall ... so that will save you a little money in the long run... but do you drive like that? lol

partsguy · 08-24-2011, 12:25 PM

Quote:

Originally Posted by JC671

No tune nesseceary unless your anal about extracting every bit of power. Honestly if your gonna continue modding with N/A mods. Get all the bolt ons them pay for a tune. Rather than mod, tune, mod, tune... It gets costly if you do it like that.

Josh@STILLEN · 08-24-2011, 12:55 PM

Quote:

Originally Posted by doublea2527

I have the Fast Intentions exhaust and just ordered the Stillen Gen 3 intakes. When I put the intakes on, will it be absolutely necessary to get a tune or do you think it will be fine. I will be getting a tune in the future, but just don't have the means to right now and don't want to be too leaned out.

Generally you're able to get away with the Gen 3 intakes, cat-back exhaust and EITHER HFC/TP or headers. When you run headers AND HFCs or Test Pipes, you'll be in a lean situation and tuning is mandatory.

That being said, most will go UpRev if they have Gen 3's, cat-back and HFCs, which will dial in the A/F ratio, and pick up 8-10whp..

370Zsteve · 08-24-2011, 12:58 PM

Quote:

Originally Posted by Josh@STILLEN

Generally you're able to get away with the Gen 3 intakes, cat-back exhaust and EITHER HFC/TP or headers. When you run headers AND HFCs or Test Pipes, you'll be in a lean situation and tuning is mandatory.

That being said, most will go UpRev if they have Gen 3's, cat-back and HFCs, which will dial in the A/F ratio, and pick up 8-10whp..

daisuke149 · 08-24-2011, 12:58 PM

id say yeah get a tune.

If you dont want to dyno tune get a base map tune for your mods

I had John @ Z1 do a base map tune for my 2 mods and it made the car run quite alot smoother. Its actaully quite disappointing to think how long I drove around with it before.

When I get some other mods added on, i'll be taking the car back to John and he will Dyno tune it. The same uprev license will be used. might cost a bit more to get it done this way (2 stages) vs just a full dyno tune, but i think its well worth it.

370Z JT · 08-24-2011, 12:59 PM

Will there be a fix for the MAF sensor like AEM has for their intakes?

JC671 · 08-24-2011, 11:05 PM

Quote:

Originally Posted by partsguy

Please explain how N/A mods is detrimental to the car without a tune. Bolts-ons on the car won't mess with the car so much where your so lean that its dangerous.

Obviously the car will run better with tune and gain power but your talking about $600 dollars a tune for just N/A mods. If you were F/I, you have to have a tune to run the car.

Quote:

Originally Posted by Josh@STILLEN

Generally you're able to get away with the Gen 3 intakes, cat-back exhaust and EITHER HFC/TP or headers. When you run headers AND HFCs or Test Pipes, you'll be in a lean situation and tuning is mandatory.

That being said, most will go UpRev if they have Gen 3's, cat-back and HFCs, which will dial in the A/F ratio, and pick up 8-10whp..

Most people do not go with the headers as most already know that they don't do much. Only proven header is the FI LTH. Other than that most have ran the car with I/HFC or TP/ CBE without issues.

But would you pay $600 every time you added a bolt on? All I suggested is that he get all that then tune. Not everyone has $$$$ disposable to shell out for a tune after a $300-500 mod was added.

Josh@STILLEN · 08-24-2011, 11:37 PM

Quote:

Originally Posted by JC671

Please explain how N/A mods is detrimental to the car without a tune. Bolts-ons on the car won't mess with the car so much where your so lean that its dangerous.

Obviously the car will run better with tune and gain power but your talking about $600 dollars a tune for just N/A mods. If you were F/I, you have to have a tune to run the car.

Most people do not go with the headers as most already know that they don't do much. Only proven header is the FI LTH. Other than that most have ran the car with I/HFC or TP/ CBE without issues.

But would you pay $600 every time you added a bolt on? All I suggested is that he get all that then tune. Not everyone has $$$$ disposable to shell out for a tune after a $300-500 mod was added.

You can do enough with the airflow on a full set of bolt-on's to bring the car out of the range where it can adapt and run lean. The Z runs a very adaptive ECU, but it can only do much. We've seen the trigger being the combination of the headers and removing the factory cats.

Yes, agree with your position of get the mods you're going to do, then tune for maximum $$ savings. But remember part of what you're paying for in the tune is the license itself, which UpRev runs $300. Anything beyond that, and you're just paying for dyno and tuning time, so it gets less expensive.

If you're really wanting to geek out and go to town, you can also get the Tuner version of UpRev, and you can tweak most things yourself. More expensive route? Absolutely.. but a lot of enthusiasts enjoy learning the details of tuning, and UpRev's tuner version will do just that. It's not the full package that a tuning shop will get, but you have enough leeway to hang yourself if you're not careful.

ChipsWithDips · 08-25-2011, 12:26 AM

Quote:

Originally Posted by 370Z JT

Will there be a fix for the MAF sensor like AEM has for their intakes?

That's what a tune is for. Those MAF signal modifiers are a kludge and unnecessary if you just get a tune anyways.

JZNx · 08-25-2011, 02:10 AM

Sorry to change the subject but I am really new at this...
but what is tuning?
Is it like adjusting the settings or something?
lol... thanks for helping out guys =)

08-23-2011, 11:34 AM	#1 (permalink)
doublea2527 Base Member Join Date: Jan 2011 Location: Hinesville, GA Age: 34 Posts: 93 Drives: 09 Tour+Sport Rep Power: 14	Quick question I have the Fast Intentions exhaust and just ordered the Stillen Gen 3 intakes. When I put the intakes on, will it be absolutely necessary to get a tune or do you think it will be fine. I will be getting a tune in the future, but just don't have the means to right now and don't want to be too leaned out. __________________ Fast Intentions / Michelin / SPC / Stillen

08-24-2011, 03:37 AM	#2 (permalink)
doublea2527 Base Member Join Date: Jan 2011 Location: Hinesville, GA Age: 34 Posts: 93 Drives: 09 Tour+Sport Rep Power: 14	Nobody has the answer to this? __________________ Fast Intentions / Michelin / SPC / Stillen

08-24-2011, 09:09 AM	#4 (permalink)
JC671 Enthusiast Member Join Date: Feb 2011 Location: Guam Posts: 451 Drives: Toretto around Rep Power: 14	No tune nesseceary unless your anal about extracting every bit of power. Honestly if your gonna continue modding with N/A mods. Get all the bolt ons them pay for a tune. Rather than mod, tune, mod, tune... It gets costly if you do it like that. __________________ A special "Thank You" to the Fast Intentions Crew! "Fueled By Passion"

08-24-2011, 12:59 PM	#11 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Will there be a fix for the MAF sensor like AEM has for their intakes? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quick question	Apoc370z	Engine & Drivetrain	2	06-01-2011 03:06 PM
quick question	darthanakin23	Nissan 370Z Pricing / Ordering Discussions	11	09-04-2010 06:00 AM
Quick Question	Jaws12	Nissan 370Z General Discussions	1	07-17-2009 02:40 PM

08-24-2011, 04:47 AM	#3 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 420	you should be fine, but get a tune sooner then later. i have G3 intakes and a CNT CBE, no tune, yet.

08-24-2011, 12:58 PM	#10 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	id say yeah get a tune. If you dont want to dyno tune get a base map tune for your mods I had John @ Z1 do a base map tune for my 2 mods and it made the car run quite alot smoother. Its actaully quite disappointing to think how long I drove around with it before. When I get some other mods added on, i'll be taking the car back to John and he will Dyno tune it. The same uprev license will be used. might cost a bit more to get it done this way (2 stages) vs just a full dyno tune, but i think its well worth it.

08-25-2011, 02:10 AM	#15 (permalink)
JZNx Base Member Join Date: Jul 2011 Location: **SoCal Posts: 246 Drives: 370z Rep Power: 13	Sorry to change the subject but I am really new at this... but what is tuning? Is it like adjusting the settings or something? lol... thanks for helping out guys =)