MOTORDYNE ART Pipes - Review

AlphaSnacks · 04-27-2011, 01:42 PM

Quote:

Originally Posted by daisuke149

maybe instead some of us had lived with something with more torque.. like a gto..

Had a deposit on a 2006 6.0L 6MT years ago before I had my 350Z. I loved it. But I do prefer a higher revving motor.

aadosx · 04-28-2011, 03:45 PM

Quote:

Originally Posted by Motordyne

Yes, I'll post pictures of it as soon as they come out of the ceramic coating process.
(I am much happier with the new design.)

And yes, the website is showing the correct list price. This new design costs more to produce but the $485 price will stay for a while.

Can't wait!!

Motordyne · 04-29-2011, 06:20 PM

Quote:

Originally Posted by aadosx

Can't wait!!

+1 Almost there.

I was able to squeeze in a little more volume into the side branch resonators. Its in the favorable direction.

Also a little more packing material was fit into the end of the resonator.

Lastly, a hemispherical end cap is now being used as opposed to a flat disk. This helps to reduce shock reflections and the potential for rasp.

All that is left is final weld up and then its off to the ceramic coating facility.

shaun66 · 04-29-2011, 11:09 PM

Nice! Good to see a product develop even more.

rz34 · 04-30-2011, 04:01 AM

hey guys just a question sorry for being noob or repeating a dumb question!

i found a dyno of baseline vs. xyz pipe on the 350z forum. At around 2k rpm there's a drop in torque what i wanna ask is
if i also have the ART pipes which increases tq at around that range, would a combo of art pipes + xyz pipe average out the loss from xyz pipe and gain from art pipes? as i saw from previous dynos there is a drop in power due to the xyz pipe at low ranges before there is an increase in power/trq

Motordyne · 04-30-2011, 10:29 AM

Yes, but for some reason every car responds differently to the same mod.

For example, most Z's and G's don't lose power @2K RPM with the XYZ pipe, but as you saw in the example you referenced sometimes it can. And I can't know why without being able to personally test the same car with the same set of modifications and start switching things around to figure it out.

Variations of dyno results can be seen in every class of breather mods and engine models. Its fairly normal. One thing I have seen is exhaust mods interact strongly with eachother. Both on the dyno results but even more so on the sound.

daisuke149 · 04-30-2011, 12:51 PM

looking good Tony! : )

Isamu · 05-02-2011, 08:08 AM

Those look great!... I so want these...

YellowStar · 05-03-2011, 02:58 AM

Will these be available for local pick up?

Anticipated date these are ready for sale? Gotta make sure I have money set aside when they do become available.

Footloose301 · 05-04-2011, 06:13 PM

Quote:

Originally Posted by YellowStar

Will these be available for local pick up?

Anticipated date these are ready for sale? Gotta make sure I have money set aside when they do become available.

+1

Also, you should give the premium members first dibs

tommyguns · 05-04-2011, 06:45 PM

Quote:

Originally Posted by Footloose301

+1

Also, you should give the premium members first dibs

aadosx · 05-05-2011, 11:43 AM

Man I was hoping these were going to be ready this week!

NeverBoneStck · 05-05-2011, 10:39 PM

I thought these were shipping 5/6

370Z JT · 05-06-2011, 01:45 AM

Sitting at a light with windows down......fumes can be overwelming.

Motordyne · 05-11-2011, 02:49 PM

Sorry for the delay guys. The ART pipes are in polishing now. The ceramic coater had to design and fabricate plugs to go into the inlet and outlet of the ART pipes before going into the vibratory tumbler for polishing.
But they are being polished now and once they come out they will be coated and glazed in the furnace.

The fabricators new projection is ~Tuesday.

04-30-2011, 04:01 AM	#245 (permalink)
rz34 Base Member Join Date: Mar 2011 Location: australia Posts: 3 Drives: 370z Rep Power: 14	hey guys just a question sorry for being noob or repeating a dumb question! i found a dyno of baseline vs. xyz pipe on the 350z forum. At around 2k rpm there's a drop in torque what i wanna ask is if i also have the ART pipes which increases tq at around that range, would a combo of art pipes + xyz pipe average out the loss from xyz pipe and gain from art pipes? as i saw from previous dynos there is a drop in power due to the xyz pipe at low ranges before there is an increase in power/trq Last edited by rz34; 04-30-2011 at 08:53 AM. Reason: fixed my question

05-05-2011, 11:43 AM	#252 (permalink)
aadosx Base Member Join Date: Jun 2010 Location: Auburn, AL Posts: 172 Drives: 2007 Nissan 350Z Rep Power: 14	Man I was hoping these were going to be ready this week! __________________ 2007 350Z HR :: 3.7 Final Drive : Injen Long-Tube Intakes : TurboXS Cat-Back : Eibach Sportline : Enkei RPF1 18x9.5/10.5 +15 Last edited by aadosx; 05-05-2011 at 05:05 PM.

05-05-2011, 10:39 PM	#253 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	I thought these were shipping 5/6 __________________ Juiced! That is all you need to know !!

05-06-2011, 01:45 AM	#254 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Sitting at a light with windows down......fumes can be overwelming. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

05-11-2011, 02:49 PM	#255 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 16	Sorry for the delay guys. The ART pipes are in polishing now. The ceramic coater had to design and fabricate plugs to go into the inlet and outlet of the ART pipes before going into the vibratory tumbler for polishing. But they are being polished now and once they come out they will be coated and glazed in the furnace. The fabricators new projection is ~Tuesday. Last edited by Motordyne; 05-11-2011 at 02:56 PM.

04-29-2011, 11:09 PM	#244 (permalink)
shaun66 Track Member Join Date: Mar 2010 Location: n Posts: 837 Drives: MB 370z 7AT Rep Power: 16	Nice! Good to see a product develop even more.

04-30-2011, 10:29 AM	#246 (permalink)
Motordyne Enthusiast Member Join Date: Nov 2008 Location: Los Angeles Posts: 384 Drives: Z Rep Power: 16	Yes, but for some reason every car responds differently to the same mod. For example, most Z's and G's don't lose power @2K RPM with the XYZ pipe, but as you saw in the example you referenced sometimes it can. And I can't know why without being able to personally test the same car with the same set of modifications and start switching things around to figure it out. Variations of dyno results can be seen in every class of breather mods and engine models. Its fairly normal. One thing I have seen is exhaust mods interact strongly with eachother. Both on the dyno results but even more so on the sound.

04-30-2011, 12:51 PM	#247 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	looking good Tony! : )

05-03-2011, 02:58 AM	#249 (permalink)
YellowStar Base Member Join Date: Jul 2009 Location: La Mirada, ca Posts: 40 Drives: 2011 370z Rep Power: 15	Will these be available for local pick up? Anticipated date these are ready for sale? Gotta make sure I have money set aside when they do become available.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Review: Motordyne M370 Manifold w/ Comparisons	Staples	Intake/Exhaust	66	06-21-2014 01:35 PM
Motordyne test pipes?	Dan Z Man	Intake/Exhaust	37	12-15-2010 09:12 PM
Motordyne Intake Manifold on the way!!	GZ3	Intake/Exhaust	67	09-16-2010 12:49 AM
another FI 18" CF CBE review w/ test pipes	mrdino77	Intake/Exhaust	9	05-27-2010 12:13 PM