My Stillen Exhaust looks wired...

Diocletian · 05-21-2010, 07:26 AM

Hah they look like a flowmaster kit that would be installed on a truck. That's AFTER you cut the exhaust(I can't believe you did that)!?

RCZ · 05-21-2010, 08:25 AM

Its probably a simple matter of going further into the slip joints.. should've been an easy fix without cutting..

Modshack · 05-21-2010, 11:01 AM

Quote:

Originally Posted by RCZ

Its probably a simple matter of going further into the slip joints.. should've been an easy fix without cutting..

....Definitely an installer error. Slip joints allow for plenty of in and out without cutting...(it's hard to find good help these days. This should have been a no-brainer)

craniac24 · 05-21-2010, 07:09 PM

Quote:

Originally Posted by RCZ

Its probably a simple matter of going further into the slip joints.. should've been an easy fix without cutting..

+1

Kastley85891 · 05-21-2010, 11:06 AM

They cut that **** instead of attempting to refit? holy crap, what a bunch of c**nts

Any Monkey can turn a wrench I guess

Trips · 05-21-2010, 11:11 AM

Quote:

Originally Posted by Kastley85891

They cut that **** instead of attempting to refit? holy crap, what a bunch of c**nts

Any Monkey can turn a wrench I guess

Obviously Not Everyone!!!

Kastley85891 · 05-21-2010, 01:02 PM

Blind and stupid ones perhaps

jacky822 · 05-21-2010, 01:49 PM

Is there any way fixing it without cutting ?

Josh@STILLEN · 05-21-2010, 02:01 PM

Quote:

Originally Posted by jacky822

Is there any way fixing it without cutting ?

There is no reason this should have been cut at all.. this is an installation error.

The slip joints allow for flexibility, and should be loosened and adjusted to bring the tips in.

jacky822 · 05-21-2010, 02:13 PM

Then the muffler shop should ******* kill themselves.

JB-370z · 05-21-2010, 01:52 PM

heat up the brackets with a torch and bend them in the direction that move the muffler back some.

craniac24 · 05-21-2010, 07:11 PM

Quote:

Originally Posted by JB-370z

heat up the brackets with a torch and bend them in the direction that move the muffler back some.

You've got to be kidding me. Totally unnecessary.

370Zsteve · 05-22-2010, 02:59 PM

Quote:

Originally Posted by JB-370z

heat up the brackets with a torch and bend them in the direction that move the muffler back some.

Quote:

Originally Posted by craniac24

You've got to be kidding me. Totally unnecessary.

x2

kenchan · 05-21-2010, 01:55 PM

wow... this is one reason why i do my own installs...

Diocletian · 05-22-2010, 11:26 AM

Let's hope this shop doesn't decide to get into hair cutting.

Customer: "Hey guys my hair is too long please cut it!"

"ok we'll fix it lol"

*cuts off customers' head*

05-21-2010, 07:26 AM	#1 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 16	Hah they look like a flowmaster kit that would be installed on a truck. That's AFTER you cut the exhaust(I can't believe you did that)!? __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

05-21-2010, 11:06 AM	#5 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	They cut that ** instead of attempting to refit? holy crap, what a bunch of cnts Any Monkey can turn a wrench I guess __________________ Boosted V8 hunter 2850 lbs and 375WHP

05-21-2010, 01:02 PM	#7 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Blind and stupid ones perhaps __________________ Boosted V8 hunter 2850 lbs and 375WHP

05-21-2010, 01:52 PM	#11 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 20	heat up the brackets with a torch and bend them in the direction that move the muffler back some. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

05-22-2010, 11:26 AM	#15 (permalink)
Diocletian Enthusiast Member Join Date: Mar 2010 Location: Orlando, Fl Posts: 350 Drives: 09 370z CY A7 Rep Power: 16	Let's hope this shop doesn't decide to get into hair cutting. Customer: "Hey guys my hair is too long please cut it!" "ok we'll fix it lol" cuts off customers' head __________________ Injen Dual CAI \| Illuminated Kick plates \| Stillen Sway bar kit \| F.I TDX w/ 12" Resonators \| F.I HFC's \| UpRev Tune \| 300HP/225tq Mustang Dyno

05-21-2010, 08:25 AM	#2 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Its probably a simple matter of going further into the slip joints.. should've been an easy fix without cutting..

05-21-2010, 01:49 PM	#8 (permalink)
jacky822 Base Member Join Date: May 2010 Location: Seattle, WA Posts: 6 Drives: BMW E92 335i Rep Power: 16	Is there any way fixing it without cutting ?

05-21-2010, 02:13 PM	#10 (permalink)
jacky822 Base Member Join Date: May 2010 Location: Seattle, WA Posts: 6 Drives: BMW E92 335i Rep Power: 16	Then the muffler shop should ******* kill themselves.

05-21-2010, 01:55 PM	#14 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	wow... this is one reason why i do my own installs...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hard wired V1 Radar detector power problem	tjlazer	Nissan 370Z General Discussions	7	01-29-2011 10:04 AM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 05:20 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 02:21 AM