Another new intake manifold

redondoaveb · 10-12-2021, 01:37 PM

A direct bolt on gtr style manifold in development

Spooler · 10-12-2021, 01:47 PM

Not sure anyone needs it right now. Who is making it?

redondoaveb · 10-12-2021, 01:52 PM

Not sure. Saw if on Facebook. Here's another pic they just posted

Rusty · 10-12-2021, 01:53 PM

6, 12, or 18 injectors. That should put some fuel down the intake.

Elmo370z · 10-17-2021, 08:46 PM

Quote:

Originally Posted by Rusty

6, 12, or 18 injectors. That should put some fuel down the intake.

It was on the Facebook page. I laughed at it. No one is making enough power to fit 12 injectors.

Rusty · 10-17-2021, 09:07 PM

Quote:

Originally Posted by Elmo370z

It was on the Facebook page. I laughed at it. No one is making enough power to fit 12 injectors.

Nitrous.

Elmo370z · 10-17-2021, 09:20 PM

Quote:

Originally Posted by Rusty

Nitrous.

Ka boom

TopgunZ · 10-18-2021, 07:38 AM

We are making one also. It is going to be much more affordable than anything currently out there. It will couple nicely with the guys looking to max out the Rotrex.

Elmo370z · 10-18-2021, 09:54 AM

Quote:

Originally Posted by TopgunZ

We are making one also. It is going to be much more affordable than anything currently out there. It will couple nicely with the guys looking to max out the Rotrex.

It’s hard to beat the oem manifold unless are wanting to pushing over 20 psi on a regular basis.

Spooler · 10-18-2021, 10:15 AM

Quote:

Originally Posted by TopgunZ

We are making one also. It is going to be much more affordable than anything currently out there. It will couple nicely with the guys looking to max out the Rotrex.

The question is will it keep the same whp as the factory plastic one?

Elmo370z · 10-18-2021, 10:25 AM

Quote:

Originally Posted by Spooler

The question is will it keep the same whp as the factory plastic one?

More then likely, no aftermarket intake manifold has improved power over oem.

Spooler · 10-18-2021, 11:48 AM

Quote:

Originally Posted by Elmo370z

More then likely, no aftermarket intake manifold has improved power over oem.

My SOHO one did. It didn't loose a thing. I gained because I can run more boost which we know is a recipe for disaster. LOL

Elmo370z · 10-18-2021, 04:36 PM

Quote:

Originally Posted by Spooler

My SOHO one did. It didn't loose a thing. I gained because I can run more boost which we know is a recipe for disaster. LOL

You gained because you ran more boost. Not because it was a superior design.

Spooler · 10-18-2021, 04:39 PM

Quote:

Originally Posted by Elmo370z

You gained because you ran more boost. Not because it was a superior design.

The SOHO is as good as the stock waffle.

DieselKrampus · 10-18-2021, 05:05 PM

What about the AAM competition manifold? Has anyone on here ever run it on their car?

Sent from my ONEPLUS A6013 using Tapatalk

10-12-2021, 01:53 PM	#4 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,860 Drives: 2011 Nismo GM 6M Rep Power: 2684436	6, 12, or 18 injectors. That should put some fuel down the intake. redondoaveb and DieselKrampus like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-18-2021, 07:38 AM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	We are making one also. It is going to be much more affordable than anything currently out there. It will couple nicely with the guys looking to max out the Rotrex. Rusty, Elmo370z, bmstitt and 2 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

10-18-2021, 05:05 PM	#15 (permalink)
DieselKrampus Base Member Join Date: Feb 2020 Location: Chadds Ford, PA Posts: 81 Drives: 2010 Nismo370Z MB M6 Rep Power: 3360	What about the AAM competition manifold? Has anyone on here ever run it on their car? Sent from my ONEPLUS A6013 using Tapatalk __________________ 2010 *Nismo* 370Z #574 . Z1 Post-MAF Tubes . Drop-in dry filters . Beluga Axleback . Z33 Shift knob

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] $500 both Stillen Gen 3 intake & Z1 Upper Intake Manifold	SC370	Parts for sale (Private Classifieds)	3	10-08-2018 02:52 PM
[FOR SALE] Motordyne 370z Intake Manifold and NEW OEM Lower Intake	Carbon_z	Parts for sale (Private Classifieds)	3	07-10-2018 04:34 PM
3" Short Intake + M370 Manifold vs 3" CAI + Z1 Manifold Dyno Comparison	MoncefVQ	Intake/Exhaust	11	02-26-2018 01:21 PM
[FOR SALE] (BNIB) OEM Intake Manifold Gaskets///Exhaust Manifold Gaskets	BlkNismo	Parts for sale (Private Classifieds)	19	08-13-2016 12:01 PM
selling used stillen G3 intake.Motordyne M370 Intake Manifold	01206	Canada	4	04-14-2016 01:31 AM

10-12-2021, 01:47 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	Not sure anyone needs it right now. Who is making it?