Fast Intentions Long Tube Headers are here!

Jamaica · 06-14-2010, 10:12 PM

Quote:

Originally Posted by cotizi

I noticed this as well. Standing behind it in my driveway all you hear is narly exhaust note that sounds awesome, but the second you get next to it its the opposite, just hiss. When driving with the windows up I hear it all the time coming from what seems like under the spare tire area.

is the hiss getting annoying? does it sound bad? hopefully you feel the power

Daishi · 06-14-2010, 10:45 PM

Quote:

Originally Posted by cotizi

I noticed this as well. Standing behind it in my driveway all you hear is narly exhaust note that sounds awesome, but the second you get next to it its the opposite, just hiss. When driving with the windows up I hear it all the time coming from what seems like under the spare tire area.

Yup because the hiss sounds like it's coming from the x pipe area. That's what your hearing your seat is basically slightly infront of the xpipe.

vipor · 06-14-2010, 10:49 PM

So the people that are hearing the hissing also have the FI CBE?

cotizi · 06-14-2010, 11:14 PM

Quote:

Originally Posted by jamaica951

is the hiss getting annoying? does it sound bad? hopefully you feel the power

Power yes, I uninstalled my intakes awhile back, and this weekend I went from just Catback to Catback + Intakes + LTH and their is absolutely a big difference. I'm taking the car in to get tuned by Uprev HQ soon and will post final dyno numbers after tune is complete.

I honestly didn't know the sound would change so much and the hissing noise would overpower the exhaust note so much. I don't like it. The physics behind it make sense, as now that there is more flow through the exhaust, the hissy-ness of the x-pipe would only get worse. I'll try and take a video of what I'm talking about tomorrow. Hopefully the audio equipment can do it justice.

I'm glad the Z isn't my daily driver, because it would get old fast. From some of the other stuff I've read on here, its a factor of the car itself, and is prevalent with other exhaust as well, not just FI's. I think the long tube headers just bring attention to something that I didn't notice nearly as bad when I just had the cat-back.

Jamaica · 06-14-2010, 11:47 PM

Quote:

Originally Posted by cotizi

Power yes, I uninstalled my intakes awhile back, and this weekend I went from just Catback to Catback + Intakes + LTH and their is absolutely a big difference. I'm taking the car in to get tuned by Uprev HQ soon and will post final dyno numbers after tune is complete.

I honestly didn't know the sound would change so much and the hissing noise would overpower the exhaust note so much. I don't like it. The physics behind it make sense, as now that there is more flow through the exhaust, the hissy-ness of the x-pipe would only get worse. I'll try and take a video of what I'm talking about tomorrow. Hopefully the audio equipment can do it justice.

I'm glad the Z isn't my daily driver, because it would get old fast. From some of the other stuff I've read on here, its a factor of the car itself, and is prevalent with other exhaust as well, not just FI's. I think the long tube headers just bring attention to something that I didn't notice nearly as bad when I just had the cat-back.

interesting. my car is a daily driver and honestly i want to hear the hiss. If you feel the power then maybe i can just tuneout the hiss.

F.I. Inc. · 06-17-2010, 10:56 AM

Quote:

Originally Posted by jamaica951

interesting. my car is a daily driver and honestly i want to hear the hiss. If you feel the power then maybe i can just tuneout the hiss.

I personally think it EVERYONE who has the long tube headers needs th 18" resonators only. At this point I have heard enough in person to make me believe the 18" is a smoother sound with less buzz or hiss!

The hiss is created by the car as we all know and the headers just enhance it. Bottom line, the more free flowing exhaust you have the more prominent the hiss will be. Now, with the combination of our long tube headers and cat back exhaust this is as free flowing as it gets!

Tony

F.I. Inc. · 06-17-2010, 11:02 AM

UPDATE- 6/17/2010

HNGonzalez: 001 (Installed)
Semtex: 002 (Installed)
Daishi: 003 (Installed)
Mr. Anonymous: 004 (Delivered)
Kolya: 005 (Installed)
The Dreamer: 006 (Installed)
LeonZ5: 007 (Delivered)
Earwicker7: 008 (Installed)
Zello370: 009 (Delivered)
Matrix_Square: 010 (Delivered)
Dainedazz: 011 (Delivered)
Cotizi: 012 (Installed))
Jason S. (Delivered)
NYBladeZ: 014 (Delivered)
Valentino: 015 (Delivered)
res0zsfa: 016 CANNOT GET AHOLD OF YOU FOR PAYMENT (SKIP)
Danny3.7: 017 (Delivered)
Tardcore: 018 (Delivered)
Booger: 019 (Installed)
PG6speed: 020 (Building)
Jnaut: 021 (Building)
Shultea1: 022 (Building)
VH370ZNISMO: 023
Vipor: 024
E.Johnson: 025 (Delivered)
Jamaica951: 026
MattKim85: 027
Bejan: 028
roplusbee: 029
Vegitto-Kun: 030

On a side note, I am getting married on July 3rd and I will be out of the office from starting July 2nd and will not be returning until July 12th. MY GOAL is to have the entire group buy completed and shipped before I leave. That is sets #1-25! That leaves 5 more sets within the next two weeks. I will make it happen. I know that this has taken longer than most have expected, myself included. Let's remember though production started a month late due to the tooling being almost a month late. In addition we have discovered that production on these is a little more time consuming than originally projected. I will always keep the lines of communication open, this is why I am telling all of this...

Thanks, Tony

theDreamer · 06-17-2010, 11:03 AM

Sent you a PM Tony.

F.I. Inc. · 06-17-2010, 11:09 AM

Quote:

Originally Posted by theDreamer

Sent you a PM Tony.

I got it and my next reply should answer it.

vipor · 06-17-2010, 11:09 AM

Tony, will getting my headers coated make it so I won't get them before you leave? I definitely want to get these on before ZCON.

Oh, and congrats of course!

Valentino · 06-17-2010, 11:56 AM

congrats Tony

F.I. Inc. · 06-17-2010, 12:16 PM

A must read for all long tube header owners thinking of adding the GTM supercharger kit:

I wanted to chime in real bad on the GTM supercharger thread. But I have bit my tongue and out of respect for Sam and GTM I will do this in my own thread.

There is alot of talk going around that my headers "flow too well" for the HR motor due to the VVEL with the long duration and overlap.

Shumby now is a proud owner of the GTM supercharger kit for his G37 and has removed our headers due to a lack of boost and power with them. I cannot sit here for any longer and let my headers take the abuse for something else that is causing the issue. I feel that it is not a tuning issue. I feel that it is a hardware issue, i.e. the supercharger itself or the kit.

Here is the deal, headers relieve back pressure. By relieving back pressure you will have a PSI drop off (boost). The goal should be to make as a much torque and power on as little boost as possible. This is called "efficiency".

I have never in my life ever, ever, ever, installed a supercharger on a car along with headers and lost power. The only way it is possible is if the supercharger kit is inefficient. This leads me into the next phase of the topic.

I have spoke to Shumby myself over the phone and here is the information I was given:

Tony, we supercharged the car and with the headers installed along with your exhaust it only made 4 psi. Then we put a smaller pulley on it and only picked up 15 horsepower and very little boost. I was never given the boost number I might add and I don't think Shumby was either. Then I was told the headers were removed and stock manifolds along with stock cats were installed. I was told at this point the car made 6-1/2 psi. So then they took the stock cats back off and put the GTM straight test pipes on the car. Same result, the psi dropped back to a very close place to the headers. No doubt, the stock cats are much more restrictive than the long tube headers or even straight test pipes. So now the stock cats were put back on the car and oh but wait, a boost leak was found. But I was told it was minimal. Either way it is force induction and a leak is detrimental to boost and power! So naturally I asked, after the leak was rectified did you put the headers back on the car a dyno it again. The answer was no we did not!

I want to see an 8 psi stock cat, stock manifold number vs. FI long tube header 8 psi number. I would bet the farm that apples compared to apples we would make higher number across the board. If you cannot get the boost back up with the long tube headers than the supercharger itself cannot move enough volume AKA (CFM) or the supercharger kit itself is holding it back. Size of intercooler, tubing size, the way tubing is routed. A good way to see if the intercooler is efficient is to take a psi reading before it as well as after it. If the psi drop off is dramatic after it than the intercooler is not efficient. If the intercooler is efficient than it is most likely the head unit itself. It physically is just too small and cannot support enough volume to feed to motor. Bottom line you then rely on the stock cats to build the boost.

Here is where the problem lyes with that. Boost is heat and the stock cats were never intended to have #1 to have that much velocity forced through them, (especially for extended periods of time). #2 being a ceramic cat they will never hold up to that kind of abuse. Worst case scenario you send the EGT's (exhaust gas temperature) through the roof before the cat and melt it shut. I think it is a poor selling point to tell people, here is my supercharger kit please buy it. Oh by the way you need to keep stock manifolds and stock cats on the car the make the boost and in return make numbers!

If the car needed that much back pressure than explain why naturally aspirated with no air being crammed into the motor how we picked up substantial amounts of torque and also power accross the board! So until I see see an independent dyno done correctly comparing apples to apples than I am not buying the information that is being sold.

This will also be posted on the first page of this headers thread.

Thank you for taking the time to read this. The phone lines are open...

Tony

XwChriswX · 06-17-2010, 12:24 PM

^^ Thanks for the explaination Tony, I was curious how improved flow with the LTH's would hurt in the long run...

On another note, with the LTH list appearing to be short compared to the CBE list, if I were to pull the trigger on both at the same time, theoretically, I'll have a set of headers built and sitting aside until my name comes up on the CBE list (7-9 weeks) or because I'm hoping to buy/install them at the same time does the name get rerouted in the CBE list to make it possible to get 1 complete install done together?

Just trying to see what is the best way to go about ordering looking at the differences in the two lists (not in including all the other awesome products you guys are making...)

F.I. Inc. · 06-17-2010, 12:29 PM

Quote:

Originally Posted by XwChriswX

^^ Thanks for the explaination Tony, I was curious how improved flow with the LTH's would hurt in the long run...

On another note, with the LTH list appearing to be short compared to the CBE list, if I were to pull the trigger on both at the same time, theoretically, I'll have a set of headers built and sitting aside until my name comes up on the CBE list (7-9 weeks) or because I'm hoping to buy/install them at the same time does the name get rerouted in the CBE list to make it possible to get 1 complete install done together?

Just trying to see what is the best way to go about ordering looking at the differences in the two lists (not in including all the other awesome products you guys are making...)

At this point since the header group buy is winding down, you will get everything at once. One will not wait on the other.

theDreamer · 06-17-2010, 12:31 PM

Tony, can you shoot me a PM about the other question I had (rasp)?

06-14-2010, 10:49 PM	#1383 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	So the people that are hearing the hissing also have the FI CBE? __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

06-17-2010, 11:02 AM	#1387 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	*UPDATE- 6/17/2010* HNGonzalez: 001 (Installed) Semtex: 002 (Installed) Daishi: 003 (Installed) Mr. Anonymous: 004 (Delivered) Kolya: 005 (Installed) The Dreamer: 006 (Installed) LeonZ5: 007 (Delivered) Earwicker7: 008 (Installed) Zello370: 009 (Delivered) Matrix_Square: 010 (Delivered) Dainedazz: 011 (Delivered) Cotizi: 012 (Installed)) Jason S. (Delivered) NYBladeZ: 014 (Delivered) Valentino: 015 (Delivered) res0zsfa: 016 CANNOT GET AHOLD OF YOU FOR PAYMENT (SKIP) Danny3.7: 017 (Delivered) Tardcore: 018 (Delivered) Booger: 019 (Installed) PG6speed: 020 (Building) Jnaut: 021 (Building) Shultea1: 022 (Building) VH370ZNISMO: 023 Vipor: 024 E.Johnson: 025 (Delivered) Jamaica951: 026 MattKim85: 027 Bejan: 028 roplusbee: 029 Vegitto-Kun: 030 On a side note, I am getting married on July 3rd and I will be out of the office from starting July 2nd and will not be returning until July 12th. MY GOAL is to have the entire group buy completed and shipped before I leave. That is sets #1-25! That leaves 5 more sets within the next two weeks. I will make it happen. I know that this has taken longer than most have expected, myself included. Let's remember though production started a month late due to the tooling being almost a month late. In addition we have discovered that production on these is a little more time consuming than originally projected. I will always keep the lines of communication open, this is why I am telling all of this... Thanks, Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

06-17-2010, 11:03 AM	#1388 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Sent you a PM Tony. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

06-17-2010, 11:09 AM	#1390 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 41 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 48	Tony, will getting my headers coated make it so I won't get them before you leave? I definitely want to get these on before ZCON. Oh, and congrats of course! __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

06-17-2010, 11:56 AM	#1391 (permalink)
Valentino Enthusiast Member Join Date: Jan 2009 Location: RaceTrack Posts: 349 Drives: SOLD 09,370z,M6 Rep Power: 305	congrats Tony __________________ Lou Fusz Nissan \| KW V3 \| SPL rear camber and toe bolt \| OS Giken LSD \| Nismo Diff cover \| Engine Oil cooler \| F.I. TDX Cat Back 18" Resonators \| F.I. Resonated Test Pipes \| Injen cold air intake \| COBB AccessPORT \| JWT Clutch Flywheel \|

06-17-2010, 12:16 PM	#1392 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 685	A must read for all long tube header owners thinking of adding the GTM supercharger kit: I wanted to chime in real bad on the GTM supercharger thread. But I have bit my tongue and out of respect for Sam and GTM I will do this in my own thread. There is alot of talk going around that my headers *"flow too well"* for the HR motor due to the VVEL with the long duration and overlap. Shumby now is a proud owner of the GTM supercharger kit for his G37 and has removed our headers due to a lack of boost and power with them. I cannot sit here for any longer and let my headers take the abuse for something else that is causing the issue. I feel that it is not a tuning issue. I feel that it is a hardware issue, i.e. the supercharger itself or the kit. Here is the deal, headers relieve back pressure. By relieving back pressure you will have a PSI drop off (boost). The goal should be to make as a much torque and power on as little boost as possible. This is called "efficiency". I have never in my life ever, ever, ever, installed a supercharger on a car along with headers and lost power. The only way it is possible is if the supercharger kit is inefficient. This leads me into the next phase of the topic. *I have spoke to Shumby myself over the phone and here is the information I was given:* Tony, we supercharged the car and with the headers installed along with your exhaust it only made 4 psi. Then we put a smaller pulley on it and only picked up 15 horsepower and very little boost. I was never given the boost number I might add and I don't think Shumby was either. Then I was told the headers were removed and stock manifolds along with stock cats were installed. I was told at this point the car made 6-1/2 psi. So then they took the stock cats back off and put the GTM straight test pipes on the car. Same result, the psi dropped back to a very close place to the headers. No doubt, the stock cats are much more restrictive than the long tube headers or even straight test pipes. So now the stock cats were put back on the car and oh but wait, a boost leak was found. But I was told it was minimal. Either way it is force induction and a leak is detrimental to boost and power! So naturally I asked, after the leak was rectified did you put the headers back on the car a dyno it again. The answer was no we did not! I want to see an 8 psi stock cat, stock manifold number vs. FI long tube header 8 psi number. I would bet the farm that apples compared to apples we would make higher number across the board. If you cannot get the boost back up with the long tube headers than the supercharger itself cannot move enough volume AKA (CFM) or the supercharger kit itself is holding it back. Size of intercooler, tubing size, the way tubing is routed. A good way to see if the intercooler is efficient is to take a psi reading before it as well as after it. If the psi drop off is dramatic after it than the intercooler is not efficient. If the intercooler is efficient than it is most likely the head unit itself. It physically is just too small and cannot support enough volume to feed to motor. Bottom line you then rely on the stock cats to build the boost. Here is where the problem lyes with that. Boost is heat and the stock cats were never intended to have #1 to have that much velocity forced through them, (especially for extended periods of time). #2 being a ceramic cat they will never hold up to that kind of abuse. Worst case scenario you send the EGT's (exhaust gas temperature) through the roof before the cat and melt it shut. I think it is a poor selling point to tell people, here is my supercharger kit please buy it. Oh by the way you need to keep stock manifolds and stock cats on the car the make the boost and in return make numbers! If the car needed that much back pressure than explain why naturally aspirated with no air being crammed into the motor how we picked up substantial amounts of torque and also power accross the board! So until I see see an independent dyno done correctly comparing apples to apples than I am not buying the information that is being sold. This will also be posted on the first page of this headers thread. Thank you for taking the time to read this. The phone lines are open... Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION" Last edited by F.I. Inc.; 06-17-2010 at 12:27 PM.

06-17-2010, 12:24 PM	#1393 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	^^ Thanks for the explaination Tony, I was curious how improved flow with the LTH's would hurt in the long run... On another note, with the LTH list appearing to be short compared to the CBE list, if I were to pull the trigger on both at the same time, theoretically, I'll have a set of headers built and sitting aside until my name comes up on the CBE list (7-9 weeks) or because I'm hoping to buy/install them at the same time does the name get rerouted in the CBE list to make it possible to get 1 complete install done together? Just trying to see what is the best way to go about ordering looking at the differences in the two lists (not in including all the other awesome products you guys are making...) __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

06-17-2010, 12:31 PM	#1395 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Tony, can you shoot me a PM about the other question I had (rasp)? __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 02:41 PM
FS: Fast Intentions HFC's - Like New	Sonic370Z	Parts for sale (Private Classifieds)	8	10-01-2009 10:59 AM
New You Tube Video of Fast Intentions CBE 18" Resonators in CF	Aus370z	Australia/New Zealand	1	09-03-2009 11:57 PM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 09:12 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-17-2009 11:25 PM