Stillen Exhaust and Stillen twin intake combo

OhioYJ

So my Z is just my daily driver so I didn't want to go crazy on it. I was still hesitant to pull the bumper and need to pull the bumper every time the filters needed to be cleaned. After doing it once, I'll say it's easy. The initial install is a couple hours if you've never done it. I'd have someone help as you don't want to drop the bumper and handling something carefully that large is much easier with a second set of hands.

Once you've done it the first time, You'll understand, there's nothing to it. I am mechanically inclined, but this really is a pretty straight forward project. The only thing I used above and beyond what I would call basic tools I would say is a Dremel, with a sanding drum (these typically come with a dremel) which made quick work of enlarging the hole in the core support.

DIY Writeup here. <-- I left the strut tower brace in place. I didn't see a reason to remove it. I removed the lower splash panel, the front inner fenders, and the front bumper.

Zatanna Z

I read the DIY and it doesn't look too bad. My dad would probably be a big help with this kinda thing, he's pretty smart with cars. I'm not super mechanically inclined but I've never done something like this before so maybe I'd be better off taking it to a mechanic. I've changed my oil and have done tire rotations so I'm not an expert by any means lol but I think it'd be cool to branch out and learn more about mechanical work.