AAM Intake Manifold

sds · 12-01-2015, 09:19 PM

I don't post often but I think you're all seriously underestimating how finicky it can be to tune VVEL N/A on a new manifold that has completely different resonance characteristics, flow characteristics, and geometries.

The power will all be in the hands of the tuner if you're N/A.

Rusty · 12-01-2015, 09:21 PM

Quote:

Originally Posted by EzDz

A new manifold designed properly will give literally every z owner who has the stock manifold gains. Na will be about 25+ hopefully. if you are running boost it will be even more beneficial.

If you don't get 25+ hp with the new manifold. We will burn you at the stake.

brucelidat · 12-02-2015, 12:11 AM

25whp, I wish, but I really doubt it. If it's anything close to that, I'm def in unless it's ridiculously expensive. I would be very happy if some combination of mods could give me +20whp NA throughout the power band. I doubt just a mani will do it, but I hope I am wrong.

D.Stillwell · 12-02-2015, 03:58 AM

^^Stillen exhaust, g3 intake, and tune gained me ~35whp over stock baseline. And that runs close to 3k price wise if all parts are brand new.

So its not untrasonable to pay 3-5k IF this actually does make ~20whp and especially if made from CF also.

Personally I plan to do cams, full 3" true dual exhaust, fuel + air (may come from this new IM). You guys think I'll make good power?

njobe89 · 12-02-2015, 07:10 AM

Quote:

Originally Posted by sds

I don't post often but I think you're all seriously underestimating how finicky it can be to tune VVEL N/A on a new manifold that has completely different resonance characteristics, flow characteristics, and geometries.

The power will all be in the hands of the tuner if you're N/A.

i think that's an understatement... you don't post at all lol.

ANMVQ · 12-02-2015, 07:44 AM

20+ WHP I'd be in, even if it's 2k in price, reason is that would put most of use in the
350 WHP -360WHP range, being NA and making those WHP numbers would be worth it IMO.

Agreed with the above, Joined 2009= 2 posts :/

njobe89 · 12-02-2015, 07:47 AM

are we talking about 20whp+ with other mods or just 20whp+ if it's the only mod.

if it would yield 20whp+ with other mods than 2k is reasonable.

if it's 20whp+ without any other mods, than i wouldn't want it being n/a.

ANMVQ · 12-02-2015, 07:51 AM

On top of what we are making now, I have the Z1 mani and ported lower (This would replace both ) I'm bolted mins headers( Coming soon) and would want to see at least 20 more than I see now. I know it's nuts but we are all talking nuts. No one knows how well or bad the stock intake mani flows, I still think I really didn't get hat much from the ported lower and the (Z1) but a different design may yield some "real" power,

njobe89 · 12-02-2015, 08:12 AM

a different design could yield more power. i'm surprised more shops haven't tried to test and see if there could a better design to be created for more power. or maybe they have and there is no power to be made, but i am curious to see how this one does.

EzDz · 12-02-2015, 09:14 AM

Quote:

Originally Posted by Rusty

If you don't get 25+ hp with the new manifold. We will burn you at the stake.

Big stakes game

ill shoot for 30 on the mani and a solid tune but I wont have a baseline.. getting literally every bolt on at once

Quote:

Originally Posted by njobe89

a different design could yield more power. i'm surprised more shops haven't tried to test and see if there could a better design to be created for more power. or maybe they have and there is no power to be made, but i am curious to see how this one does.

Go to my manifold post and find the 350z manifold link, that engineer will be making mine and is being made to be produced

EzDz · 12-02-2015, 09:16 AM

Quote:

Originally Posted by njobe89

are we talking about 20whp+ with other mods or just 20whp+ if it's the only mod.

if it would yield 20whp+ with other mods than 2k is reasonable.

if it's 20whp+ without any other mods, than i wouldn't want it being n/a.

The goal is to gain20+ whp from the mani if you have all supporting mods including long tubes.

FPenvy · 12-02-2015, 09:21 AM

Quote:

Originally Posted by EzDz

The goal is to gain20+ whp from the mani if you have all supporting mods including long tubes.

hmmm new mani plus possible new secret mod should put me way up there

njobe89 · 12-02-2015, 09:41 AM

Quote:

Originally Posted by EzDz

Go to my manifold post and find the 350z manifold link, that engineer will be making mine and is being made to be produced

i remember seeing it, just didn't know who posted it

Quote:

Originally Posted by EzDz

The goal is to gain20+ whp from the mani if you have all supporting mods including long tubes.

that would be a nice gain

EzDz · 12-02-2015, 10:06 AM

Quote:

Originally Posted by njobe89

i remember seeing it, just didn't know who posted it

that would be a nice gain

Its my thread, working on a manifold for spring release

njobe89 · 12-02-2015, 10:10 AM

Quote:

Originally Posted by EzDz

Its my thread, working on a manifold for spring release

so is spring yet?

12-02-2015, 12:11 AM	#63 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	25whp, I wish, but I really doubt it. If it's anything close to that, I'm def in unless it's ridiculously expensive. I would be very happy if some combination of mods could give me +20whp NA throughout the power band. I doubt just a mani will do it, but I hope I am wrong. Mysilverz likes this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

12-02-2015, 07:44 AM	#66 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	20+ WHP I'd be in, even if it's 2k in price, reason is that would put most of use in the 350 WHP -360WHP range, being NA and making those WHP numbers would be worth it IMO. Agreed with the above, Joined 2009= 2 posts :/ FPenvy likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

12-02-2015, 07:47 AM	#67 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174283	are we talking about 20whp+ with other mods or just 20whp+ if it's the only mod. if it would yield 20whp+ with other mods than 2k is reasonable. if it's 20whp+ without any other mods, than i wouldn't want it being n/a. __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

12-02-2015, 07:51 AM	#68 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	On top of what we are making now, I have the Z1 mani and ported lower (This would replace both ) I'm bolted mins headers( Coming soon) and would want to see at least 20 more than I see now. I know it's nuts but we are all talking nuts. No one knows how well or bad the stock intake mani flows, I still think I really didn't get hat much from the ported lower and the (Z1) but a different design may yield some "real" power, __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

12-02-2015, 08:12 AM	#69 (permalink)
njobe89 A True Z Fanatic Join Date: May 2014 Location: Atlanta, GA Posts: 5,227 Drives: 2013 370z BS 6MT Rep Power: 174283	a different design could yield more power. i'm surprised more shops haven't tried to test and see if there could a better design to be created for more power. or maybe they have and there is no power to be made, but i am curious to see how this one does. __________________ 2 plus 2 times 2 = ? ... hint, it's not 8 Stillen CBE, Stillen Gen 3, TP's, Uprev tuned - 324whp/264tq

12-01-2015, 09:19 PM	#61 (permalink)
sds Base Member Join Date: Nov 2009 Location: DE Posts: 2 Drives: 05 G35 Sedan 5AT Rep Power: 15	I don't post often but I think you're all seriously underestimating how finicky it can be to tune VVEL N/A on a new manifold that has completely different resonance characteristics, flow characteristics, and geometries. The power will all be in the hands of the tuner if you're N/A.

12-02-2015, 03:58 AM	#64 (permalink)
D.Stillwell Enthusiast Member Join Date: Sep 2015 Location: Snakeden Branch, VA Posts: 396 Drives: Fairlady Z34/6MT Rep Power: 18	^^Stillen exhaust, g3 intake, and tune gained me ~35whp over stock baseline. And that runs close to 3k price wise if all parts are brand new. So its not untrasonable to pay 3-5k IF this actually does make ~20whp and especially if made from CF also. Personally I plan to do cams, full 3" true dual exhaust, fuel + air (may come from this new IM). You guys think I'll make good power?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] (BNIB) OEM Intake Manifold Gaskets///Exhaust Manifold Gaskets	BlkNismo	Parts for sale (Private Classifieds)	19	08-13-2016 12:01 PM
Z1 Intake Manifold	cranzy	Z1 Motorsports	3	08-13-2015 05:26 PM
Intake manifold	Schsplayer00	Engine & Drivetrain	23	02-25-2015 05:24 PM
[FOR SALE] OEM intake manifold	seymore4	Parts for sale (Private Classifieds)	5	02-24-2012 06:17 PM