Official Group Buy: MINES Carbon Spoiler Add-On!

Calvin · 10-07-2010, 11:15 AM

Step 1: Clean your stock spoiler
Step 2: Stick on the 3mm tape provided by Mines. **I attached the 3mm tape on the part of the Mines spoiler where it will touch the side of my stock spoiler**
Step 3: Push the Mines spoiler tight and align it evenly on your stock spoiler.
Step 4: BE CAREFUL. I took a power drilled the screws on lol.
Step 5: Now you may enjoy your long waited Mines spoiler

hopefully this helps for ones who didn't know how to install it. It was really simple xP

ltp · 10-07-2010, 01:35 PM

Quote:

Originally Posted by Calvin

here's a crappy phone camera quality pix. I'll upload the ones from my camera the moment I get off of class today. HOPEFULLY =)

It looks great to me Calvin.

Calvin · 10-07-2010, 01:37 PM

haha thanks bro =)

NewYorkJon34 · 10-07-2010, 01:38 PM

Calvin how did u tint your taillights?

Calvin · 10-07-2010, 04:05 PM

bluebatmobile's overlays =)

NewYorkJon34 · 10-07-2010, 04:07 PM

Really, I tried twice to have it done, what is the secret?

Calvin · 10-07-2010, 04:15 PM

haha. i just removed my taillight fully and set my taillights on a table and did it that's all,

my sides aren't that great; the little curves is ridiculously hard. i'm debating on just riping them off and leaving them red, or getting them painted.

ltp · 10-08-2010, 09:21 PM

Quote:

Originally Posted by ltp

I received mine today too.
Did a quick fit test and it fits pretty well. The CF goes very well with my black Z.
The only bad thing is the screws are silver instead of black. They don't go with the CF color at all. Definitely have to get some good black aluminum screws before I install them.

FYI, it took me awhile to find a couple places that have the right black screws to replace the ugly original screws. We should let Mines know about this. $800 spoiler comes with ugly screws to ruin the look.

1) This place has the best screws but expensive $5.95 a piece x 6 = $36.00.
They have to order them from Italy which will take 2-3 weeks.
LighTech Self Tapping Anodized Aluminum Screws - M4.5x13 ( 10mm head ) images and photos - OPPRACING

2) This place is more in affordable $0.99 a piece and the screws are pretty good too and will take about 2 weeks to order.
eReplacementParts.com : Tapping Screw (W/Flange) D4X16 (Black) [305-812] - $0.99

ltp · 10-15-2010, 09:16 PM

Finally got mine installed. Still waiting for the black screws to replace the stock ugly silver screws.
Some pictures of mine.

Calvin · 10-20-2010, 01:20 PM

delayed pictures... sorry lol, been catching up with my studies... midterms ;( well i should be studying right now still but here some pictures

NewYorkJon34 · 10-20-2010, 01:38 PM

Where's the pics?

Calvin · 10-21-2010, 03:35 AM

oh wow sorry they didn't post for some reason here let me try again

Shwimpy · 11-28-2010, 04:46 PM

Am I too late to get in on this group buy for the spoiler add-on?! When are we gonna see some Mine's VX-filter group buys!

Ryan@Forged · 11-29-2010, 09:15 AM

Car looks great Calvin

Shwimpy, group buy has come and gone, but I can still get you one at the higher price if you would like one.

FastPaced · 05-31-2011, 09:21 AM

Quote:

Originally Posted by Ryan@Forged

Car looks great Calvin

Shwimpy, group buy has come and gone, but I can still get you one at the higher price if you would like one.

Can I still order one, too? Thanks.

10-07-2010, 11:15 AM	#166 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 33 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 17	Step 1: Clean your stock spoiler Step 2: Stick on the 3mm tape provided by Mines. I attached the 3mm tape on the part of the Mines spoiler where it will touch the side of my stock spoiler Step 3: Push the Mines spoiler tight and align it evenly on your stock spoiler. Step 4: BE CAREFUL. I took a power drilled the screws on lol. Step 5: Now you may enjoy your long waited Mines spoiler hopefully this helps for ones who didn't know how to install it. It was really simple xP __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

10-07-2010, 01:37 PM	#168 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 33 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 17	haha thanks bro =) __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

10-07-2010, 04:05 PM	#170 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 33 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 17	bluebatmobile's overlays =) __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

10-07-2010, 04:15 PM	#172 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 33 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 17	haha. i just removed my taillight fully and set my taillights on a table and did it that's all, my sides aren't that great; the little curves is ridiculously hard. i'm debating on just riping them off and leaving them red, or getting them painted. __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

10-15-2010, 09:16 PM	#174 (permalink)
ltp Base Member Join Date: Jan 2009 Location: Nothern California Posts: 165 Drives: 370Z Black on Black Rep Power: 16	Black 370Z with Mines rear wing Finally got mine installed. Still waiting for the black screws to replace the stock ugly silver screws. Some pictures of mine. Last edited by ltp; 10-17-2010 at 01:46 PM.

10-07-2010, 01:38 PM	#169 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	Calvin how did u tint your taillights?

10-07-2010, 04:07 PM	#171 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	Really, I tried twice to have it done, what is the secret?

10-20-2010, 01:20 PM	#175 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 33 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 17	delayed pictures... sorry lol, been catching up with my studies... midterms ;( well i should be studying right now still but here some pictures __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

10-20-2010, 01:38 PM	#176 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	Where's the pics?

10-21-2010, 03:35 AM	#177 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 33 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 17	oh wow sorry they didn't post for some reason here let me try again __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT Last edited by Calvin; 10-21-2010 at 03:49 AM.

11-28-2010, 04:46 PM	#178 (permalink)
Shwimpy Base Member Join Date: Nov 2010 Location: L.A. Posts: 10 Drives: TT Z32 / 40th Z34 Rep Power: 3369	Am I too late to get in on this group buy for the spoiler add-on?! When are we gonna see some Mine's VX-filter group buys!

11-29-2010, 09:15 AM	#179 (permalink)
Ryan@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta/Kennesaw, GA Posts: 1,527 Drives: Evo 8/Evo 9 MR/GTR Rep Power: 0	Car looks great Calvin Shwimpy, group buy has come and gone, but I can still get you one at the higher price if you would like one.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Rear Spoiler (Factory Style) @ The 370ZSOURCE!!!!!!	Michael@TheZStore	Exterior & Interior	60	06-15-2012 10:49 PM
New Spoiler Option? ( Mines + Branew + Porsche?) NEED YOUR OPINIONS	htt760	Exterior & Interior	22	07-09-2010 05:31 PM
Group buy mines add on	Calvin	Exterior & Interior	36	05-28-2010 10:42 AM
Front license plate carbon fiber backing group buy!	SpawnAeroJohn	Nissan 370Z General Discussions	14	07-06-2009 09:04 PM