Vq35hr 20psi stillen blower

1slow370 · 03-30-2014, 03:13 PM

you guys are all taking this the wrong way O&G since you apparently have connections with the shop could you ask them if this is a thing they are still testing out to see what happens, or will they be selling the charger and higher speed pulley? or can that pulley be used fine on a regular stillen charger? and what kind of intercooler mods will they do to support the additional heat?

Other good ones are, if they are over-spinning it is it a matter of vortech underrating the unit, or did they modify it for extra rpms, as well as as what they think the actual redline of their charger is? like can it be spun faster than with the new pulley or will they have it maxed out?

mikey1600 · 04-08-2014, 07:27 AM

any updates on this thing yet?

jwick · 04-08-2014, 08:08 AM

It was running when I went by the shop a couple weeks ago. No tuning yet as they were still tweaking things a little.

Edit - I left off the thing sounds beastly

O&G · 04-08-2014, 11:54 AM

Car only made 2psi of boost...... Na, its still in breakin, Ill see if i can get an update on it 2day

sent from my Samsung Galaxy Note

Chuck33079 · 04-08-2014, 11:57 AM

Quote:

Originally Posted by O&G

Car only made 2psi of boost...... Na, its still in breakin, Ill see if i can get an update on it 2day

sent from my Samsung Galaxy Note

Overspun the blower and the shop exploded? Dozens of puppies killed in the fire?

O&G · 04-08-2014, 12:01 PM

Quote:

Originally Posted by Chuck33079

Overspun the blower and the shop exploded? Dozens of puppies killed in the fire?

You must have seen it on the lcoal news rofl

sent from my Samsung Galaxy Note

Chuck33079 · 04-08-2014, 12:02 PM

Quote:

Originally Posted by O&G

You must have seen it on the lcoal news rofl

sent from my Samsung Galaxy Note

What really sucks was the fire spread to the "Orphans and Kittens" event next door. All hands lost.

jwick · 04-08-2014, 12:45 PM

Quote:

Originally Posted by Chuck33079

What really sucks was the fire spread to the "Orphans and Kittens" event next door. All hands lost.

All the cars are fine though....Right?

elperuano · 04-08-2014, 01:15 PM

^That's what I was thinking

ANMVQ · 04-09-2014, 10:31 AM

Cars and ALL PARTS are safe, FWWEEE

Pro4Jackster · 04-13-2014, 11:45 AM

I just saw this. It is my car. I got the cog pulley idea from the Stillen supercharged guys on this forum. I am running the 3.2" serp pulley that comes with the kit. The rear pulleys were a 1:1 ratio and were changed out for 34T:30T setup and JTran made the idler pulley and got everything to work. Should be spinning the Si impeller around 56K rpms. It made 13+ psi on the SCi impeller at the same rpms, so I think 16+ psi is probable with the Si. Also have a 28T pulley in Ron's toolbox, but we haven't been able to make it work without shredding cog belts. It would spin the blower around 61K rpms, but I don't think it's going to happen. That setup will surely push close to 20 psi, but I'm not in a rush to make that work right now. For extra cooling, we added meth injection.

The car made 266hp w/ boltons and tune. 409hp w/ Stillen SC. 420+hp w/cogs. 450+hp when it blew w/ cogs and Si impeller and quite a bit of belt slip(15 psi @ 6500 rpms and held 15psi to redline).

We'll see how it does in a couple of weeks. I ran a 12.5 @ 114 on street tires with the cog pulleys and SCi impeller. I am a Novice.

All facts. Take them or leave them.

jwick · 04-13-2014, 11:48 AM

Quote:

Originally Posted by Pro4Jackster

I just saw this. It is my car. I got the cog pulley idea from the Stillen supercharged guys on this forum. I am running the 3.2" serp pulley that comes with the kit. The rear pulleys were a 1:1 ratio and were changed out for 34T:30T setup and JTran made the idler pulley and got everything to work. Should be spinning the Si impeller around 56K rpms. It made 13+ psi on the SCi impeller at the same rpms, so I think 16+ psi is probable with the Si. Also have a 28T pulley in Ron's toolbox, but we haven't been able to make it work without shredding cog belts. It would spin the blower around 61K rpms, but I don't think it's going to happen. That setup will surely push close to 20 psi, but I'm not in a rush to make that work right now. For extra cooling, we added meth injection.

The car made 266hp w/ boltons and tune. 409hp w/ Stillen SC. 420+hp w/cogs. 450+hp when it blew w/ cogs and Si impeller and quite a bit of belt slip(15 psi @ 6500 rpms and held 15psi to redline).

We'll see how it does in a couple of weeks. I ran a 12.5 @ 114 on street tires with the cog pulleys and SCi impeller. I am a Novice.

All facts. Take them or leave them.

Your car is nasty! Good job

Sent from my SPH-L710 using Tapatalk

Pro4Jackster · 04-13-2014, 11:51 AM

Also note. The faster we spin the Vortech blower with the Stillen kit, the smaller the HP gains up top, but it gained gobs of TQ throughout the entire rpm range. I think the Stillen piping may not flow well enough at the higher rpms. So every step along the way has been much more noticeable on the street than the peak hp numbers suggest.

jwick · 04-13-2014, 11:53 AM

Quote:

Originally Posted by Pro4Jackster

Also note. The faster we spin the Vortech blower with the Stillen kit, the smaller the HP gains up top, but it gained gobs of TQ throughout the entire rpm range. I think the Stillen piping may not flow well enough at the higher rpms. So every step along the way has been much more noticeable on the street than the peak hp numbers suggest.

That's exactly where you want. I was at the shop a couple weeks ago and man does that thing sound good

Sent from my SPH-L710 using Tapatalk

O&G · 04-13-2014, 12:23 PM

This GT500 at our shop has a similar design like the Stillen setup. It has the plate running coolant between the S/C manifold and lower intake manifold. Difference is, it's a water to air setup w/ a front mount intercooler setup reducing temps drastically and making gobs of whp & wtq. This can be done for the Stillen kit on our platforms with proper JTran modifications! Food for thought!

Pro4jackster I'm your Irish brother w/ the low mount 70mm turbo setup on the built block, 40th 370Z! Glad to see you on the forum!

03-30-2014, 03:13 PM	#46 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	you guys are all taking this the wrong way O&G since you apparently have connections with the shop could you ask them if this is a thing they are still testing out to see what happens, or will they be selling the charger and higher speed pulley? or can that pulley be used fine on a regular stillen charger? and what kind of intercooler mods will they do to support the additional heat? Other good ones are, if they are over-spinning it is it a matter of vortech underrating the unit, or did they modify it for extra rpms, as well as as what they think the actual redline of their charger is? like can it be spun faster than with the new pulley or will they have it maxed out? __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 03-30-2014 at 03:30 PM.

04-08-2014, 08:08 AM	#48 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	It was running when I went by the shop a couple weeks ago. No tuning yet as they were still tweaking things a little. Edit - I left off the thing sounds beastly __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-08-2014, 11:54 AM	#49 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	Car only made 2psi of boost...... Na, its still in breakin, Ill see if i can get an update on it 2day sent from my Samsung Galaxy Note __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

04-09-2014, 10:31 AM	#55 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Cars and ALL PARTS are safe, FWWEEE O&G likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

04-13-2014, 11:45 AM	#56 (permalink)
Pro4Jackster Base Member Join Date: Oct 2011 Location: NW Houston Posts: 130 Drives: '08 350Z Rep Power: 13	I just saw this. It is my car. I got the cog pulley idea from the Stillen supercharged guys on this forum. I am running the 3.2" serp pulley that comes with the kit. The rear pulleys were a 1:1 ratio and were changed out for 34T:30T setup and JTran made the idler pulley and got everything to work. Should be spinning the Si impeller around 56K rpms. It made 13+ psi on the SCi impeller at the same rpms, so I think 16+ psi is probable with the Si. Also have a 28T pulley in Ron's toolbox, but we haven't been able to make it work without shredding cog belts. It would spin the blower around 61K rpms, but I don't think it's going to happen. That setup will surely push close to 20 psi, but I'm not in a rush to make that work right now. For extra cooling, we added meth injection. The car made 266hp w/ boltons and tune. 409hp w/ Stillen SC. 420+hp w/cogs. 450+hp when it blew w/ cogs and Si impeller and quite a bit of belt slip(15 psi @ 6500 rpms and held 15psi to redline). We'll see how it does in a couple of weeks. I ran a 12.5 @ 114 on street tires with the cog pulleys and SCi impeller. I am a Novice. All facts. Take them or leave them. Nixlimited, Mr.Squeeze, O&G and 3 others like this. __________________ Jtranbuilt '08 Z [Jtran PT7075 Single - Fujitsubo - Transgo - Wilwood - TE37SL - BC Racing]

04-08-2014, 07:27 AM	#47 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 15	any updates on this thing yet?

04-08-2014, 01:15 PM	#54 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	^That's what I was thinking

04-13-2014, 11:51 AM	#58 (permalink)
Pro4Jackster Base Member Join Date: Oct 2011 Location: NW Houston Posts: 130 Drives: '08 350Z Rep Power: 13	Also note. The faster we spin the Vortech blower with the Stillen kit, the smaller the HP gains up top, but it gained gobs of TQ throughout the entire rpm range. I think the Stillen piping may not flow well enough at the higher rpms. So every step along the way has been much more noticeable on the street than the peak hp numbers suggest. __________________ Jtranbuilt '08 Z [Jtran PT7075 Single - Fujitsubo - Transgo - Wilwood - TE37SL - BC Racing]

04-13-2014, 12:23 PM	#60 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	This GT500 at our shop has a similar design like the Stillen setup. It has the plate running coolant between the S/C manifold and lower intake manifold. Difference is, it's a water to air setup w/ a front mount intercooler setup reducing temps drastically and making gobs of whp & wtq. This can be done for the Stillen kit on our platforms with proper JTran modifications! Food for thought! Pro4jackster I'm your Irish brother w/ the low mount 70mm turbo setup on the built block, 40th 370Z! Glad to see you on the forum! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Stillen blower blew up :(	FireDan50	Forced Induction	20	08-22-2013 06:05 AM
GReddy High Capacity Aluminum Oil Pan VQ35HR VQ37HR USED $269 w/ FREE SHIPPING*	Sales@AAMComp	Drivetrain/Engine	12	10-30-2012 12:53 PM
WTB: ATI Blower Fan	DIGItonium	Misc Items for sale (No Z stuff)	6	12-29-2010 01:38 PM
Any 370s running higher than 20psi?	GoDZiLLa_845	Forced Induction	68	04-16-2010 11:31 PM
NEW Exedy Stage 2 Cerametalic Clutch Kit w/Chromaly Flywheel VQ35HR/VQ37	NIZMOZ	Parts for sale (Private Classifieds)	8	10-25-2009 08:49 AM