Vq35hr 20psi stillen blower
 

I ran a cross this today thought it was pretty interesting. Jtran motorsports built this vq35hr with stillen blower kit at 20 psi. I don't know all the other specs but if they did it to this similar kit then It shouldn't be to hard to do it to our engines.


https://www.facebook.com/jTranStudio...999379022711:0

Should be easy to do, curious to see what they did to the stillen SC to upgrade it for the 20PSI.
I am sure it will be posted on FB soon what it dynos at, but curious to see its HP/TQ output with the stillen SC (or any SC at that really).

I just saw this on facebook as well. I am interested in seeing the results too :)

they are either guessing at 20 psi or they changed a lot

Ron Bergenholtz doesn't guess, he is building the entire setup. It will be running on E85 and has some custom pulley and charger mods as well. Like them on FB and stay tuned!

I believe that Stillen manifold in the SC kit was made just for the VHR engine. So I wonder if the manifold was modified slightly to fix the HR lower intake manifold, or if they switch over to a VHR lower intake manifold and VHR rails.

We put the HR manifold on my VHR and it fit. We did it last week when I was installing my return kit.

sent from my Samsung Galaxy Note

Don't mess with the mad scientist's mojo!

Is there a benefit going hr?

Sounds like it's on a built motor to me.

This is what stillen posted about it on FB.
"
We can't wait to see the results of this #supercharger install by Jtran Motorsports Inc!
Built 350z HR STILLEN supercharger 20 psi setup ready to drop in. This is going to be exciting!"

Did you put the HR lower and upper on, or just the upper, or just the lower?

I know the HR and VHR lowers will bolt up the heads the same.

But the bolt pattern for the upper to lower should be slightly different between HR and VHR? I think that is why people buy that motordyne M370 or whatever it is, because they oval the holes out for you before they ship it? Something like that.

This sounds like a massive build. Looking forward to the results.

I agree, I enjoy watching all of the extreme builds around here.

We just set the stillen manifold on my upper manifold to see if bolted up. Which it does. No idea on the pattern but it appeared to be the samé.

The motor is fully built with arias pistons and carrillo rods. Ill get more details on it 2marrow.

sent from my Samsung Galaxy Note

Thanks for filling us in!