Blown Motor, Engine Rebuild/Replacement.

JARblue · 09-29-2014, 10:57 AM

That still seems like a lot of shavings. I would send in a sample to Blackstone for sure.

COSMO · 09-29-2014, 11:22 AM

I just ordered the black stone oil kit..

Chuck33079 · 09-29-2014, 11:25 AM

If you've already changed the oil you'll have to give it some more mileage and test the next batch. Even if you kept the oil from this change, it's likely contaminated from the container it was kept in.

jwick · 09-29-2014, 11:36 AM

Quote:

Originally Posted by Chuck33079

If you've already changed the oil you'll have to give it some more mileage and test the next batch. Even if you kept the oil from this change, it's likely contaminated from the container it was kept in.

the directions are specific about sample collection

COSMO · 09-29-2014, 08:06 PM

Stay tuned, when I do my next oil change that oil will be sent to blackstone and I will post the results...

COSMO · 10-07-2014, 07:15 AM

Just checking in .. I received my blackstone kit in yesterday and going to put a little more miles on this fresh oil before I do another change. So far so good with the engine..

COSMO · 10-13-2014, 07:17 AM

At this point it seems to be burning oil every time I take it out. I'm still using the Nissan 5-30 ester oil and now right at about 1500k miles. Been thinking maybe its getting some blow by coming from the valve cover breather since it recirculates but after taking off the intake tubes and intercooler piping it is bone dry with no oil residue.. The car is now hitting 18psi...

Chuck33079 · 10-13-2014, 07:21 AM

Quote:

Originally Posted by COSMO

At this point it seems to be burning oil every time I take it out. I'm still using the Nissan 5-30 ester oil and now right at about 1500k miles. Been thinking maybe its getting some blow by coming from the valve cover breather since it recirculates but after taking off the intake tubes and intercooler piping it is bone dry with no oil residue.. The car is now hitting 18psi...

What was the max psi when Bobby was tuning it? I wouldn't run a single psi over what it saw on the dyno since they wouldn't have had a chance to dial everything in at that boost pressure.

The burning oil is a concern, but maybe it will go away as the motor breaks in further. Sometimes new motors eat oil. I've got my fingers crossed.

jwick · 10-13-2014, 07:21 AM

Quote:

Originally Posted by COSMO

At this point it seems to be burning oil every time I take it out. I'm still using the Nissan 5-30 ester oil and now right at about 1500k miles. Been thinking maybe its getting some blow by coming from the valve cover breather since it recirculates but after taking off the intake tubes and intercooler piping it is bone dry with no oil residue.. The car is now hitting 18psi...

Try Rotella Syn 5W-40 see if the thicker oil helps you

COSMO · 10-13-2014, 07:55 AM

Yeah I spoke with bobby yesterday and that's what he recommended was going to a thicker 5-40 weight after it breaks in.. I noticed on the bp kit that you guys have a crank case breather and not sure about FI's kit but later I may do the same..

Quote:

Originally Posted by jwick

Try Rotella Syn 5W-40 see if the thicker oil helps you

jwick · 10-13-2014, 08:09 AM

Quote:

Originally Posted by COSMO

Yeah I spoke with bobby yesterday and that's what he recommended was going to a thicker 5-40 weight after it breaks in.. I noticed on the bp kit that you guys have a crank case breather and not sure about FI's kit but later I may do the same..

I don't recommend changing the way the PCV systems is routed. The majority of us that have that secondary PCV vented to atmosphere link it to the stumbling idle. I know the AAM kit is routed just like GTMs and I would venture to guess Tony did the same on their kit.

COSMO · 10-13-2014, 09:11 AM

I definitely don't want any idle issues so I wont be doing anything to that.. Thanks for the heads up..

COSMO · 10-24-2014, 11:25 AM

Switched to motul 5-40 today and just sent off a sample to Blackstone.. Stay tuned!!

MidnightBlueZ · 10-25-2014, 11:40 AM

Hoping the results are favorable! That's some good oil btw!

COSMO · 10-28-2014, 05:55 PM

My blackstone oil results came back today. Can anyone tell me how I can mark out my personal information on the report? The report in in a pdf format.. As soon as I figure out how to do that I will post it up..

09-29-2014, 10:57 AM	#1201 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	That still seems like a lot of shavings. I would send in a sample to Blackstone for sure. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

09-29-2014, 11:25 AM	#1203 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	If you've already changed the oil you'll have to give it some more mileage and test the next batch. Even if you kept the oil from this change, it's likely contaminated from the container it was kept in. jwick likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

10-07-2014, 07:15 AM	#1206 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Just checking in .. I received my blackstone kit in yesterday and going to put a little more miles on this fresh oil before I do another change. So far so good with the engine.. ANMVQ and MidnightBlueZ like this.

10-24-2014, 11:25 AM	#1213 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Switched to motul 5-40 today and just sent off a sample to Blackstone.. Stay tuned!! Infidel and MidnightBlueZ like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 08:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 05:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-02-2012 11:29 PM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 11:28 AM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 10:01 AM

09-29-2014, 11:22 AM	#1202 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	I just ordered the black stone oil kit..

09-29-2014, 08:06 PM	#1205 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Stay tuned, when I do my next oil change that oil will be sent to blackstone and I will post the results...

10-13-2014, 07:17 AM	#1207 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	At this point it seems to be burning oil every time I take it out. I'm still using the Nissan 5-30 ester oil and now right at about 1500k miles. Been thinking maybe its getting some blow by coming from the valve cover breather since it recirculates but after taking off the intake tubes and intercooler piping it is bone dry with no oil residue.. The car is now hitting 18psi...

10-13-2014, 09:11 AM	#1212 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	I definitely don't want any idle issues so I wont be doing anything to that.. Thanks for the heads up..

10-25-2014, 11:40 AM	#1214 (permalink)
MidnightBlueZ Enthusiast Member Join Date: Apr 2013 Location: Nashville, TN Posts: 291 Drives: 13 Nissan 370Z Turbo Rep Power: 17	Hoping the results are favorable! That's some good oil btw!

10-28-2014, 05:55 PM	#1215 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	My blackstone oil results came back today. Can anyone tell me how I can mark out my personal information on the report? The report in in a pdf format.. As soon as I figure out how to do that I will post it up..