![]() |
Actually after looking at the motor there are 2 ports that can be used on each side. More to come soon...
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#2 (permalink) |
A True Z Fanatic
|
![]()
RAD T'd off the driver side because its the coldest source of coolant possible, but I would suspect running one to each turbo would still be far superior to what GTM does. Also be sure to clock the turbo so that the output port is facing slightly up which will help pull coolant through the turbo after you shut off the car.
|
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Blown motor!!!! | COSMO | Forced Induction | 166 | 11-25-2013 08:33 PM |
Someone in the DFW area who can rebuild a 370z motor | Denny McLain | Engine & Drivetrain | 16 | 01-29-2013 05:27 PM |
370z engine blown | Fabsnoop | Nissan 370Z General Discussions | 53 | 06-02-2012 11:29 PM |
WORST DAY!!!! Possible engine blown???!!!! | Westwood | Engine & Drivetrain | 189 | 04-09-2012 11:28 AM |
vq37vhr ( 370z motor ) NOT BLOWN | soaka1 | Wanted | 0 | 03-10-2010 10:01 AM |