OEM Hood v Seibon TS Testing

theDreamer · 08-05-2013, 10:08 AM

I have an opportunity, before putting on a Seibon TS hood, to run some cipher logs and collect some data. I would like to do this for comparison for members looking for what results can or cannot be achieved when adding a vented hood to their car. Also looking for suggestions on what people want logged so everything can be covered.

My question is what specific units would you guys wanted recorded?
-Oil temp
-Water temp
-IAT
-Ambient temp (Can cipher do this one?)
-Others?

My plan is to get some solid logs in under different conditions.
-Traffic driving
-Hot temps, then idle for 5 minutes
-Morning commute (usually no traffic and temps in the 70-80)
-Others?

My car for testing:
-2009 6MT 370z with Stage 1 GTM SC
-CSF radiator & 25 row oil cooler
-Stock header & cats with F.I. exhaust
-Coupe front bumper
-No fender ventilation currently

Chuck33079 · 08-05-2013, 10:29 AM

That sounds about right. Make sure you test with AC on and off.

Sh0velMan · 08-05-2013, 10:34 AM

Hmmmm.

Coolant and Oil temps would be nice to know, I'm sure you'll see drops at speed just because of increased airflow.

What I'd really like to know is actual under-hood temps from various places in the engine bay.

For instance, on top of the intake manifold, in the Brake / Clutch MC area (how much heat soaks through the inner firewall into that compartment before and after), etc.

Hard to log those automatically without a dedicated setup though.

theDreamer · 08-05-2013, 10:39 AM

Quote:

Originally Posted by Sh0velMan

Hmmmm.

Coolant and Oil temps would be nice to know, I'm sure you'll see drops at speed just because of increased airflow.

What I'd really like to know is actual under-hood temps from various places in the engine bay.

For instance, on top of the intake manifold, in the Brake / Clutch MC area (how much heat soaks through the inner firewall into that compartment before and after), etc.

Hard to log those automatically without a dedicated setup though.

Yeah, maybe get a heat gun thing and when I run it up, stop really quick, pop the hood and measure temps? Not going to be perfectly accurate but might get close.

Sh0velMan · 08-05-2013, 10:46 AM

Quote:

Originally Posted by theDreamer

Yeah, maybe get a heat gun thing and when I run it up, stop really quick, pop the hood and measure temps? Not going to be perfectly accurate but might get close.

This?

Lab Thermocouple Temperature Chart Recorder Data Logger Computer PC with Alarm | eBay

theDreamer · 08-05-2013, 10:47 AM

Quote:

Originally Posted by Sh0velMan

This?

Lab Thermocouple Temperature Chart Recorder Data Logger Computer PC with Alarm | eBay

That works, I was thinking of those heat gun temp readers you can get at home improvement stores. You just shoot it at a target and it measures the temp, my father has one but he said it was cheap and only reads up to like 200ish degrees.

This: http://www.amazon.com/Temperature-In.../dp/B002YE3FS4

Sh0velMan · 08-05-2013, 10:50 AM

Quote:

Originally Posted by theDreamer

That works, I was thinking of those heat gun temp readers you can get at home improvement stores. You just shoot it at a target and it measures the temp, my father has one but he said it was cheap and only reads up to like 200ish degrees.

Yeah, i knew what you meant, was just offering a cheap solution that would actually datalog.

There are others sold by that same person that have multiple channels and don't really cost a lot more.

That's what I would do, get a 3 or 4 channel one and run those bitches all over my engine bay, then you can build an accurate model of before and after the hood.

Just use the car's reported ambient temp, subtract the ambient from whatever the under hood readings are and you'll have a (sloppily) normalized measure to compare before and after.

Sh0velMan · 08-05-2013, 10:51 AM

(since you're going to have your laptop doing Cipher anyway)

(also, you can log from the Rom Editor program as well if you have a Cipher cable, its logging capabilities are quite a bit better, IMO)

theDreamer · 08-05-2013, 10:51 AM

Quote:

Originally Posted by Sh0velMan

Yeah, i knew what you meant, was just offering a cheap solution that would actually datalog.

There are others sold by that same person that have multiple channels and don't really cost a lot more.

That's what I would do, get a 3 or 4 channel one and run those bitches all over my engine bay, then you can build an accurate model of before and after the hood.

Just use the car's reported ambient temp, subtract the ambient from whatever the under hood readings are and you'll have a (sloppily) normalized measure to compare before and after.

Might look into this, so it can log the data and I can download later?
It says on the page it just plugs in and reads out temps, so want to make sure I can run it under the hood & download at a later time.

theDreamer · 08-05-2013, 10:53 AM

Quote:

Originally Posted by Sh0velMan

(since you're going to have your laptop doing Cipher anyway)

(also, you can log from the Rom Editor program as well if you have a Cipher cable, its logging capabilities are quite a bit better, IMO)

I was reading this the other day, that Uprev is actually moving away from Cipher and saying to use the ROM editor for data logging now. Had not gotten to try it so will give it a test today.

Sh0velMan · 08-05-2013, 10:53 AM

Quote:

Originally Posted by theDreamer

Might look into this, so it can log the data and I can download later?
It says on the page it just plugs in and reads out temps, so want to make sure I can run it under the hood & download at a later time.

It requires a laptop. It runs software on the laptop to record and save the data.

I figured it was acceptable since you're going to run ECU logging anyway. There are stand-alone units that are cheap as well, have to find them, gimmie a minute.

Sh0velMan · 08-05-2013, 10:55 AM

Quote:

Originally Posted by theDreamer

I was reading this the other day, that Uprev is actually moving away from Cipher and saying to use the ROM editor for data logging now. Had not gotten to try it so will give it a test today.

Yeah if you have a flashed ROM, use the ROM Editor, it's much better. It will give you a lot more detailed info on what's going on with the car.

Cipher works even with stock ECUs, so it still has its' purpose (and has those "gauges" it can do, which I have never used).

theDreamer · 08-05-2013, 10:56 AM

Quote:

Originally Posted by Sh0velMan

Yeah if you have a flashed ROM, use the ROM Editor, it's much better. It will give you a lot more detailed info on what's going on with the car.

Cipher works even with stock ECUs, so it still has its' purpose (and has those "gauges" it can do, which I have never used).

Ah, ok. Time to use the ROM editor from now on then for data logging.
Does it still save it out as a CSV file?

Chuck33079 · 08-05-2013, 10:56 AM

6 Point Temperature Indicator

Maybe something like this?

Sh0velMan · 08-05-2013, 10:59 AM

Quote:

Originally Posted by theDreamer

Ah, ok. Time to use the ROM editor from now on then for data logging.
Does it still save it out as a CSV file?

Yeah you can save it to a CSV.

08-05-2013, 10:08 AM	#1 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	OEM Hood v Seibon TS Testing I have an opportunity, before putting on a Seibon TS hood, to run some cipher logs and collect some data. I would like to do this for comparison for members looking for what results can or cannot be achieved when adding a vented hood to their car. Also looking for suggestions on what people want logged so everything can be covered. My question is what specific units would you guys wanted recorded? -Oil temp -Water temp -IAT -Ambient temp (Can cipher do this one?) -Others? My plan is to get some solid logs in under different conditions. -Traffic driving -Hot temps, then idle for 5 minutes -Morning commute (usually no traffic and temps in the 70-80) -Others? My car for testing: -2009 6MT 370z with Stage 1 GTM SC -CSF radiator & 25 row oil cooler -Stock header & cats with F.I. exhaust -Coupe front bumper -No fender ventilation currently __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-05-2013, 10:29 AM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	That sounds about right. Make sure you test with AC on and off. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

08-05-2013, 10:34 AM	#3 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 21	Hmmmm. Coolant and Oil temps would be nice to know, I'm sure you'll see drops at speed just because of increased airflow. What I'd really like to know is actual under-hood temps from various places in the engine bay. For instance, on top of the intake manifold, in the Brake / Clutch MC area (how much heat soaks through the inner firewall into that compartment before and after), etc. Hard to log those automatically without a dedicated setup though. __________________ Buy My Car! \| Build Thread

08-05-2013, 10:51 AM	#8 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 21	(since you're going to have your laptop doing Cipher anyway) (also, you can log from the Rom Editor program as well if you have a Cipher cable, its logging capabilities are quite a bit better, IMO) __________________ Buy My Car! \| Build Thread

08-05-2013, 10:56 AM	#14 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	6 Point Temperature Indicator Maybe something like this? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seibon TS CF or VIS AMS Hood?	ZeeingAround	Exterior & Interior	7	08-05-2012 03:07 PM
[WTB] OEM PG hood trade for Seibon CF GTR hood + cash.	370zFORme!!	Parts for sale (Private Classifieds)	6	11-23-2011 04:35 PM
Seibon TS CF hood $500	jimmy99	Parts for sale (Private Classifieds)	7	10-09-2010 05:04 AM
seibon GTR style hood....	simota1	Exterior & Interior	24	07-05-2010 09:11 AM