Boosted Performance round 2 list

blackonorange · 04-08-2014, 01:01 PM

Hmm I musta missed something. As mine won't fire. I'll take the intake mani off again and see what I can see

m3chhawk · 04-08-2014, 01:09 PM

There are a lot of plugs. Make sure they are all properly seated. With no fire at all, I would lean towards the plug for the fuel rail.

blackonorange · 04-08-2014, 01:33 PM

Hmm possibly it's not seated, but it looks like it is.

Mitco39 · 04-08-2014, 02:06 PM

I believe when I did my injectors I forgot to plug in one of my throttle body plugs. If you messed something up just check the codes with uprev, it will tell you exactly where to look.

blackonorange · 04-08-2014, 03:00 PM

Lol it was my injectors... Fuel everywhere... They weren't seated enough in the intake.... Oh bother...

Mitco39 · 04-08-2014, 03:22 PM

Make sure you clean it up good, Id hate to see you blow it apart or catch the car on fire when you go to start it up.

Even though your close dont cut corners, I know its hard and exciting. haha. You getting tuned in Edmonton this spring perhaps?

blackonorange · 04-08-2014, 03:33 PM

lol yea I cleaned it up it wasn't that bad actually. I'm not sure if I am. I don't think I'll be able to get the days off

esfourteen · 04-08-2014, 03:40 PM

Quote:

Originally Posted by blackonorange

Lol it was my injectors... Fuel everywhere... They weren't seated enough in the intake.... Oh bother...

wow, be careful. did you use some lubricant on the injector o-rings before installing the rail?

TopgunZ · 04-08-2014, 03:40 PM

When I did my 350z I had Cosworth rails with ID1000's and they didn't seat at all. I had pools of fuel. Nobody told me I needed clips.

That's why I had to double check on this build as you don't use the clips with the stock rails. Live n learn.

blackonorange · 04-08-2014, 03:52 PM

Quote:

Originally Posted by esfourteen

wow, be careful. did you use some lubricant on the injector o-rings before installing the rail?

Yea but I wasn't sure how hard I had to push them in as my 600dw slid right in. After it didn't start the first couple times I checked under my manifold and I could see a bit of wetness near the back injector. All is good now. Lol it sounds crazy with the amuse exhaust. Just waiting on the base tune.

Diabel · 04-09-2014, 01:45 PM

Guys with BP kit mounted - do any of you have the HKS EVC 6 boost controller and could confirm that this is the proper mounting diagram:

I have some problems with raising the boost - I can't make the HKS to make more boost than westgate spring. Maybe someone had similiar issues with that HKS?

JMac88 · 04-09-2014, 06:41 PM

The common mistake with the hks is the initial programming. I would reset and start fresh. The first boost pressure it's asking for is when you want the hks to engage, not where you want target boost. I set mine at 7 psi. Then you set your target boost. Check your settings and report back. Chance are if it was not plumed properly you would be seeing crazy boost amounts

elperuano · 04-09-2014, 07:23 PM

HKS is such a pita!

Joepro · 04-10-2014, 08:40 AM

I love the GFB gforce 2 so far, really simple, cost effective and stupid simple. Doing a final check on the setup tonight, its running fine, but I am always paranoid something is wrong(story of my life) off to see tune master Vince tomorrow!

jwick · 04-10-2014, 09:18 AM

Quote:

Originally Posted by Joepro

I love the GFB gforce 2 so far, really simple, cost effective and stupid simple. Doing a final check on the setup tonight, its running fine, but I am always paranoid something is wrong(story of my life) off to see tune master Vince tomorrow!

You should pay Vince an hour of labor to have his mechanic look everything over.

04-08-2014, 01:09 PM	#1082 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	There are a lot of plugs. Make sure they are all properly seated. With no fire at all, I would lean towards the plug for the fuel rail. __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo

04-08-2014, 02:06 PM	#1084 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 131	I believe when I did my injectors I forgot to plug in one of my throttle body plugs. If you messed something up just check the codes with uprev, it will tell you exactly where to look. jlo370z likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

04-08-2014, 03:22 PM	#1086 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 131	Make sure you clean it up good, Id hate to see you blow it apart or catch the car on fire when you go to start it up. Even though your close dont cut corners, I know its hard and exciting. haha. You getting tuned in Edmonton this spring perhaps? __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

04-08-2014, 03:40 PM	#1089 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	When I did my 350z I had Cosworth rails with ID1000's and they didn't seat at all. I had pools of fuel. Nobody told me I needed clips. That's why I had to double check on this build as you don't use the clips with the stock rails. Live n learn. blackonorange likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-09-2014, 06:41 PM	#1092 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 14	The common mistake with the hks is the initial programming. I would reset and start fresh. The first boost pressure it's asking for is when you want the hks to engage, not where you want target boost. I set mine at 7 psi. Then you set your target boost. Check your settings and report back. Chance are if it was not plumed properly you would be seeing crazy boost amounts __________________ Full Mod List

04-08-2014, 01:01 PM	#1081 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	Hmm I musta missed something. As mine won't fire. I'll take the intake mani off again and see what I can see

04-08-2014, 01:33 PM	#1083 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	Hmm possibly it's not seated, but it looks like it is.

04-08-2014, 03:00 PM	#1085 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	Lol it was my injectors... Fuel everywhere... They weren't seated enough in the intake.... Oh bother...

04-08-2014, 03:33 PM	#1087 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	lol yea I cleaned it up it wasn't that bad actually. I'm not sure if I am. I don't think I'll be able to get the days off

04-09-2014, 01:45 PM	#1091 (permalink)
Diabel Base Member Join Date: Sep 2012 Location: Bensenville IL Posts: 103 Drives: 370z Rep Power: 12	Guys with BP kit mounted - do any of you have the HKS EVC 6 boost controller and could confirm that this is the proper mounting diagram: I have some problems with raising the boost - I can't make the HKS to make more boost than westgate spring. Maybe someone had similiar issues with that HKS?

04-09-2014, 07:23 PM	#1093 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	HKS is such a pita!

04-10-2014, 08:40 AM	#1094 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I love the GFB gforce 2 so far, really simple, cost effective and stupid simple. Doing a final check on the setup tonight, its running fine, but I am always paranoid something is wrong(story of my life) off to see tune master Vince tomorrow! fuct, Mr.Squeeze and GaleForce like this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 11:17 AM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 05:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 02:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-13-2011 11:47 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 07:13 PM