GTM Supercharger - I need a power steering hose

wind.zero · 06-02-2014, 05:13 PM

I put my car back to stock, long story. I returned everything back to stock myself.

One of the things missing

from the original install at the shop (I specifically asked that all OEM parts be kept) was one of the high pressure power steering lines that connects to the eye bolt on the power steering pump and runs down to the frame hard line. It is well documented in the GTM install instructions. If you self installed your kit, you will definitely remember removing this hose.

I tried to order it from 2 different OEM Nissan parts suppliers and they both said the part "is not available" from Nissan. I tried to order it online twice and the orders were canceled.

I called GTM looking for customer take offs, and Sam said they did not have any.

Does anyone who self installed their SC kits willing to sell me the hose?

The pictures below show where the hose connects at the PS pump and then down on the frame hard line.

Thanks

Picture of the eye bolt connection at the PS pump:

Picture of the connect at the frame hard line:

Infidel · 06-02-2014, 07:12 PM

If I can find mine it's yours. I have a big box of sh!t I have to stare at in my garage. Give me a few.

wind.zero · 06-02-2014, 07:22 PM

Quote:

Originally Posted by Infidel

If I can find mine it's yours. I have a big box of sh!t I have to stare at in my garage. Give me a few.

wind.zero · 06-03-2014, 09:17 AM

Just for reference, this is what the hose should look like in the picture below.

You will have removed the pressure sensor and installed it on a GTM aluminum adapter at the power steering pump. So your hose will not have the sensor.

The other end disconnected at a rubber isolation mount on the frame rail.

So the entire hose I am looking for will look like this one with the orange arrows:

Infidel · 06-03-2014, 10:56 AM

Cool, I've been doing some running around this morning and once I get something to eat I'll go out to the garage and look for it. I think I found it last night I just have to compare to pics.

Quote:

Originally Posted by wind.zero

Just for reference, this is what the hose should look like in the picture below.

You will have removed the pressure sensor and installed it on a GTM aluminum adapter at the power steering pump. So your hose will not have the sensor.

The other end disconnected at a rubber isolation mount on the frame rail.

So the entire hose I am looking for will look like this one with the orange arrows:

06-02-2014, 05:13 PM	#1 (permalink)
wind.zero Enthusiast Member Join Date: Apr 2011 Location: The 49th State Posts: 296 Drives: NISMOSIS Rep Power: 14	GTM Supercharger - I need a power steering hose I put my car back to stock, long story. I returned everything back to stock myself. One of the things missing from the original install at the shop (I specifically asked that all OEM parts be kept) was one of the high pressure power steering lines that connects to the eye bolt on the power steering pump and runs down to the frame hard line. It is well documented in the GTM install instructions. If you self installed your kit, you will definitely remember removing this hose. I tried to order it from 2 different OEM Nissan parts suppliers and they both said the part "is not available" from Nissan. I tried to order it online twice and the orders were canceled. I called GTM looking for customer take offs, and Sam said they did not have any. Does anyone who self installed their SC kits willing to sell me the hose? The pictures below show where the hose connects at the PS pump and then down on the frame hard line. Thanks Picture of the eye bolt connection at the PS pump: Picture of the connect at the frame hard line:

06-02-2014, 07:12 PM	#2 (permalink)
Infidel Enthusiast Member Join Date: Mar 2013 Location: Central Florida Posts: 457 Drives: 2013 GM 6MT Rep Power: 14	If I can find mine it's yours. I have a big box of sh!t I have to stare at in my garage. Give me a few. esfourteen likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to get more power out of a stillen supercharger kit?	karamountzos	Forced Induction	95	05-16-2016 07:30 AM
AN fittings / Hose Ends, Steel & Nylon Braided Hose @ JBtuned.com	JBtuned	Drivetrain/Engine	1	04-18-2013 11:27 PM
is it ok to use a power hose on the undercarriage of the car?	Apoc370z	Nissan 370Z General Discussions	4	10-08-2011 07:33 AM
Power Steering Cooler hose	370z40	Engine & Drivetrain	3	10-06-2010 07:37 AM

06-03-2014, 09:17 AM	#4 (permalink)
wind.zero Enthusiast Member Join Date: Apr 2011 Location: The 49th State Posts: 296 Drives: NISMOSIS Rep Power: 14	Just for reference, this is what the hose should look like in the picture below. You will have removed the pressure sensor and installed it on a GTM aluminum adapter at the power steering pump. So your hose will not have the sensor. The other end disconnected at a rubber isolation mount on the frame rail. So the entire hose I am looking for will look like this one with the orange arrows: