GTM Performance Engineering: MHI Twin Turbo Official Release

SPOHN · 04-29-2013, 10:36 AM

Yes the EWG are going to be open dumb. I love freighting people.

Dzel · 04-29-2013, 10:36 AM

How much more would it be? For exw?

SPOHN · 04-29-2013, 10:37 AM

Quote:

Originally Posted by KaienZ34

Recirculated external wastegtes, is that an option?

Nothing has been mentioned but I'm sure it can be at additional cost. I hav to call GTM today ill find out.

KaienZ34 · 04-29-2013, 10:40 AM

Quote:

Originally Posted by SPOHN

Nothing has been mentioned but I'm sure it can be at additional cost. I hav to call GTM today ill find out.

I thank you....

SPOHN · 04-29-2013, 11:41 AM

Talked to Sam. Recirculated pipes will be an option for EWG.

Alstann · 04-29-2013, 12:30 PM

Hey Spohn, if you do decide to visit them...hold Sam/Mike hostage until they give you a ship date.

Dzel · 04-29-2013, 01:46 PM

How much?

SPOHN · 04-29-2013, 01:51 PM

Not sure. GTM has a lot of there parts on there website. So that will give you a good idea.

Dzel · 04-29-2013, 01:57 PM

Go back to GTM Spohn you have given us nothing! Lol

Mike@GTM · 04-29-2013, 01:58 PM

Quote:

Originally Posted by Footloose301

Gotcha. Yeah this is why many prefer external waste gates I suppose.

Is there any reason the HKS electronic boost controller like the evc 6 will NOT work with this internal wastegates?

I want to be able to adjust between 8-11psi.

Yes, the HKS EVC 6 will work wonderfully with the internal wastegates.

Quote:

Originally Posted by edub370

anyone know how the ewg's are gonna be ran? i havent read thru every page, so if it's been mentioned sry in advance. but are these gonna be routed back into the exhaust or open dumps? if open dumps, then hellll yea. i love the ease of internal wg's, but im slightly worried about boost creep with my 2.5" test pipes

The standard option for our 3" downpipes with external wastegates is for open dump. Keep in mind that the 3" downpipes end where the cat-back begins. There is no need to worry about boost creep with the 2.5" test pipes and the 18g's.

Quote:

Originally Posted by KaienZ34

Recirculated external wastegtes, is that an option?

Yes, it is an extra cost option for recirculating.

Quote:

Originally Posted by Alstann

Hey Spohn, if you do decide to visit them...hold Sam/Mike hostage until they give you a ship date.

lol We'll be giving an accurate ship date and that requires knowing when every little detail will be ready. There are still a few unknowns right now as to when a couple items will be ready to go. Once we have that information, we'll be announcing it. We are shooting for sometime in June/July. We'll firm it up once we know when everything will be ready though.

Footloose301 · 04-29-2013, 02:44 PM

Thanks for clearing up my question about the boost controller. Also, June/July sounds good so I can grab some goodies to go with the kit

SPOHN · 04-29-2013, 04:00 PM

My goodies came in today so they will be just sitting here.......waiting. I do think I'm going to pick up the GTM fans and shroud.

SS_Firehawk · 04-29-2013, 05:13 PM

Quote:

Originally Posted by SPOHN

My goodies came in today so they will be just sitting here.......waiting. I do think I'm going to pick up the GTM fans and shroud.

Does that work with CSF radiators too

SPOHN · 04-29-2013, 06:01 PM

Quote:

Originally Posted by SS_Firehawk

Does that work with CSF radiators too

It difinitly should IMO. The CSF is the same as stock just twice as thick.

SS_Firehawk · 04-29-2013, 06:26 PM

Quote:

Originally Posted by SPOHN

It difinitly should IMO. The CSF is the same as stock just twice as thick.

I may have to add those to my list now... Damn it Spohn, you do nothing to curb my spending!!! Gauges are F'n expensive too, holy crap. Someone would do well to make a Defi gauge group buy lol. Especially with the huge influx of boosted Z's.

04-29-2013, 10:36 AM	#496 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Yes the EWG are going to be open dumb. I love freighting people. __________________

04-29-2013, 10:36 AM	#497 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	How much more would it be? For exw? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-29-2013, 11:41 AM	#500 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Talked to Sam. Recirculated pipes will be an option for EWG. __________________

04-29-2013, 12:30 PM	#501 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 14	Hey Spohn, if you do decide to visit them...hold Sam/Mike hostage until they give you a ship date. Dzel and blackonorange like this. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

04-29-2013, 01:46 PM	#502 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	How much? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-29-2013, 01:51 PM	#503 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Not sure. GTM has a lot of there parts on there website. So that will give you a good idea. __________________

04-29-2013, 01:57 PM	#504 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Go back to GTM Spohn you have given us nothing! Lol __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-29-2013, 02:44 PM	#506 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 21	Thanks for clearing up my question about the boost controller. Also, June/July sounds good so I can grab some goodies to go with the kit __________________ 2010 40th Anniversary 370Z

04-29-2013, 04:00 PM	#507 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	My goodies came in today so they will be just sitting here.......waiting. I do think I'm going to pick up the GTM fans and shroud. Dzel likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM