GTM Performance Engineering: MHI Twin Turbo Official Release

SS_Firehawk · 04-24-2013, 08:10 PM

Quote:

Originally Posted by Baer383

You haven't seen it but you want it!!!!

Calm down tiger.

It's baffled, holds more oil, looks boss, and sits higher than a spacer pan. What's not to like? Holding 7-8 quarts of oil is a boon (including oil cooler[s]). I was a bit jealous of the larger intercoolers too, until I found out my kit gets them too haha. There is a surprising amount of parts sharing (minus turbos and xtra piping) between them, mine cost nearly 2x as much, and doesn't make as much under the curve! There is good reason why so many are jumping on this. If I were to go TT, this would be it, it really helps guys afford the supporting mods and stay in a reasonable price point. Instead of spending $15k, you can spend 10. At least that's the way I see it. Hopefully these guys don't get "turbo vision" and focus only on the kit, but get the supporting mods that are recommended.

Baer383 · 04-24-2013, 08:23 PM

Quote:

Originally Posted by SS_Firehawk

It's baffled, holds more oil, looks boss, and sits higher than a spacer pan. What's not to like? Holding 7-8 quarts of oil is a boon (including oil cooler[s]). I was a bit jealous of the larger intercoolers too, until I found out my kit gets them too haha. There is a surprising amount of parts sharing (minus turbos and xtra piping) between them, mine cost nearly 2x as much, and doesn't make as much under the curve! There is good reason why so many are jumping on this. If I were to go TT, this would be it, it really helps guys afford the supporting mods and stay in a reasonable price point. Instead of spending $15k, you can spend 10. At least that's the way I see it. Hopefully these guys don't get "turbo vision" and focus only on the kit, but get the supporting mods that are recommended.

Where have you seen the pan?I haven't seen it.

My oil capacity is 8 quarts.

KaienZ34 · 04-24-2013, 08:30 PM

I think he's talking about the cad pics in the first post of this thread.

GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release

Nixlimited · 04-24-2013, 11:50 PM

Quote:

Originally Posted by SS_Firehawk

If I were to go TT, this would be it, it really helps guys afford the supporting mods and stay in a reasonable price point. Instead of spending $15k, you can spend 10. At least that's the way I see it.

Take my word for it, this kit with proper supporting mods and install will still be > 10K. Totally worth it, though.

Dzel · 04-25-2013, 12:10 AM

I'm looking at around thst amount if I take it to get installed and tuned.

SPOHN · 04-25-2013, 09:24 AM

Im so ready for this to be released its driving me crazy (girlfriend to). What worries me is its going to be awhile. AWHILE, before it is. I won't be ready to install till after ZDayz but after that I hope something gives. I support GTM all the way I just hate being in the dark. Which I completely understand why shops do this. I would to.

I just have so many things that's has to be done when this goes down. Plus on top of my other plans. I'm going to have my TT kit powder coated the same as my wheels. But have the intercoolers thermal coated. About to order more gauges but I really need to order all this things threw GTM. Just hard to hold out. Lol. I've already ordered TT shirts. So it's definitely happening.

Dzel · 04-25-2013, 10:31 AM

Quote:

Originally Posted by SPOHN

Im so ready for this to be released its driving me crazy (girlfriend to). What worries me is its going to be awhile. AWHILE, before it is. I won't be ready to install till after ZDayz but after that I hope something gives. I support GTM all the way I just hate being in the dark. Which I completely understand why shops do this. I would to.

I just have so many things that's has to be done when this goes down. Plus on top of my other plans. I'm going to have my TT kit powder coated the same as my wheels. But have the intercoolers thermal coated. About to order more gauges but I really need to order all this things threw GTM. Just hard to hold out. Lol. I've already ordered TT shirts. So it's definitely happening.

Lol I have like three turbo/boost shirts!

esfourteen · 04-25-2013, 10:37 AM

Quote:

Originally Posted by SPOHN

Im so ready for this to be released its driving me crazy (girlfriend to). What worries me is its going to be awhile. AWHILE, before it is. I won't be ready to install till after ZDayz but after that I hope something gives. I support GTM all the way I just hate being in the dark. Which I completely understand why shops do this. I would to.

I just have so many things that's has to be done when this goes down. Plus on top of my other plans. I'm going to have my TT kit powder coated the same as my wheels. But have the intercoolers thermal coated. About to order more gauges but I really need to order all this things threw GTM. Just hard to hold out. Lol. I've already ordered TT shirts. So it's definitely happening.

congrats on your soon to be boost, this kit is a great choice

SPOHN · 04-25-2013, 01:08 PM

I think I'm going to fly out there for a night to see the shop. It would be a fun one nighter.

blackonorange · 04-25-2013, 01:27 PM

I know what you mean, idk what to do do i start ripping my car apart or what?

Dzel · 04-25-2013, 04:47 PM

I'm just waiting on the installation manual to make a decision on what I'm going to do.

Footloose301 · 04-25-2013, 05:15 PM

Quote:

Originally Posted by Dzel

I'm just waiting on the installation manual to make a decision on what I'm going to do.

Same here. I've got a daily driver so if it takes two weeks for me to install in my free time then I'm fine with it.

370zrider · 04-25-2013, 05:29 PM

What would be your exhaust setup recommendation if I want to keep the Stillen exhaust?

I saw that Cosmogirl had issues trying to set the Stillen exhaust with gtm's 3' test pipes.

Footloose301 · 04-25-2013, 05:31 PM

Test pipes are the way to go. No cats. They will burn up from the extra heat.

SPOHN · 04-25-2013, 06:01 PM

Open dump is the way to go.

Nice talking to you today Sam.

04-24-2013, 08:30 PM	#438 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	I think he's talking about the cad pics in the first post of this thread. GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release Dzel likes this. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

04-25-2013, 12:10 AM	#440 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	I'm looking at around thst amount if I take it to get installed and tuned. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-25-2013, 09:24 AM	#441 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Im so ready for this to be released its driving me crazy (girlfriend to). What worries me is its going to be awhile. AWHILE, before it is. I won't be ready to install till after ZDayz but after that I hope something gives. I support GTM all the way I just hate being in the dark. Which I completely understand why shops do this. I would to. I just have so many things that's has to be done when this goes down. Plus on top of my other plans. I'm going to have my TT kit powder coated the same as my wheels. But have the intercoolers thermal coated. About to order more gauges but I really need to order all this things threw GTM. Just hard to hold out. Lol. I've already ordered TT shirts. So it's definitely happening. esfourteen, Mr&Mrs and Dzel like this. __________________

04-25-2013, 01:08 PM	#444 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I think I'm going to fly out there for a night to see the shop. It would be a fun one nighter. KaienZ34 likes this. __________________

04-25-2013, 01:27 PM	#445 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	I know what you mean, idk what to do do i start ripping my car apart or what? SPOHN likes this.

04-25-2013, 04:47 PM	#446 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	I'm just waiting on the installation manual to make a decision on what I'm going to do. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-25-2013, 05:29 PM	#448 (permalink)
370zrider Base Member Join Date: Sep 2012 Location: Mexico Posts: 106 Drives: 370zM6tour12nosport Rep Power: 12	What would be your exhaust setup recommendation if I want to keep the Stillen exhaust? I saw that Cosmogirl had issues trying to set the Stillen exhaust with gtm's 3' test pipes. __________________ Stillen [gen3 CAI + headers + HFC + Exhaust + UD Pulley + lightweight flywheel] + Uprev e-tune+ PC680 Odyssey battery + oil cooler + MishimotoThermostat = 312whp + 252wtq @1,500mts or 5,000ft elevation

04-25-2013, 05:31 PM	#449 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 21	Test pipes are the way to go. No cats. They will burn up from the extra heat. __________________ 2010 40th Anniversary 370Z

04-25-2013, 06:01 PM	#450 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Open dump is the way to go. Nice talking to you today Sam. Dzel likes this. __________________ Last edited by SPOHN; 04-25-2013 at 06:34 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM