Fast Intentions "Twin Turbo Kit" is here

VSS370z · 04-09-2015, 01:44 PM

With a good tune and 93 or higher octane gas you will always be able to extract more power but if you only have 91 available then stick with that and keep it around 450-500 whp with a conservative tune which is usually what many here do running 91 pump gas.

conmam · 04-09-2015, 11:43 PM

Quote:

Originally Posted by VSS370z

With a good tune and 93 or higher octane gas you will always be able to extract more power but if you only have 91 available then stick with that and keep it around 450-500 whp with a conservative tune which is usually what many here do running 91 pump gas.

Sounds just right 500whp with proper tuning. Also, try to keep your engine oil and coolant temps as low as your system allows. 185F - 190F coolant temp with 200F - 220F oil temp. The bottom lime is to prevent detonations the best that we can. That is almost the sole factor of blowing up any motors.

VSS370z · 04-10-2015, 10:12 AM

Basically don't skip on supporting mods.

djtodd · 04-10-2015, 10:14 AM

^Fuel system, cooling, and tuning. Get those right and you've no reason to worry

Rob298mx · 04-20-2015, 03:08 PM

Just put my order in today

F.I. Inc. · 04-20-2015, 03:17 PM

Quote:

Originally Posted by Rob298mx

Just put my order in today

Robert,

Thank you for trusting your build with us. We won't disappoint!

Looking forward to adding you to "the list" and more importantly getting your system out to you.

Thanks.

-Tony

conmam · 04-21-2015, 10:29 AM

Quote:

Originally Posted by F.I. Inc.

Robert,

Thank you for trusting your build with us. We won't disappoint!

Looking forward to adding you to "the list" and more importantly getting your system out to you.

Thanks.

-Tony

Tony, please add me to the list. I received your email. I will reply and will see you in person in early May. I will also let you know the exact date.

Thank you

F.I. Inc. · 04-21-2015, 11:14 AM

Quote:

Originally Posted by conmam

Tony, please add me to the list. I received your email. I will reply and will see you in person in early May. I will also let you know the exact date.

Thank you

We are pleased to hear that you will be ready to move forward next month. As soon as your deposit is in, I can add you to the list.

Shoot me over a reply to that email when you have a moment.

Thanks.

-Tony

conmam · 05-04-2015, 01:04 PM

Quote:

Originally Posted by F.I. Inc.

We are pleased to hear that you will be ready to move forward next month. As soon as your deposit is in, I can add you to the list.

Shoot me over a reply to that email when you have a moment.

Thanks.

-Tony

Tony,

I called FI today and was not able to get in touch with you. I talked to Kevin instead.

Please do call me back ASAP since I am planning to come this Friday and discuss, as well as paying for the TT set up as well

Thank you

Rob298mx · 04-20-2015, 05:19 PM

You're the man Tony. Walking through the process with someone with such knowledge speaks volumes for their reputation. Thanks again!

reldas · 04-22-2015, 11:47 PM

Hey Tony are you going to make a new thread for the 7AT upgrades when they are available to purchase?

F.I. Inc. · 04-27-2015, 10:24 PM

Quote:

Originally Posted by reldas

Hey Tony are you going to make a new thread for the 7AT upgrades when they are available to purchase?

Quote:

Originally Posted by critical

in for 7AT info

Quote:

Originally Posted by megalapagas

x3 on yhe 7at

The Flex Plate is currently available. I currently have two left in stock. Specs are:

*Billet Aluminum CNC cut
*SFI Approved
*OEM Torque Converter Placement
*All new ARP Flex Plate & Torque Converter hardware included

Please contact us for pricing on the Flex Plate. As for the transmission, it is currently being reworked. We found that the stock replacement amount of Exedy clutches are not enough to support the 620+ RWH / 550+ RWT that Cy's car makes. In a collaborative effort between us (FI), Exedy directly and our transmission builder, we are working to create a package that is specifically for the JR710E "AKA" 7AT. As soon as I have the transmission back in hand, we will schedule the first possible track day to further our testing.

Thanks.
-Tony

ColdFire · 04-29-2015, 11:41 AM

Quote:

Originally Posted by F.I. Inc.

The Flex Plate is currently available. I currently have two left in stock. Specs are:

*Billet Aluminum CNC cut
*SFI Approved
*OEM Torque Converter Placement
*All new ARP Flex Plate & Torque Converter hardware included

Please contact us for pricing on the Flex Plate. As for the transmission, it is currently being reworked. We found that the stock replacement amount of Exedy clutches are not enough to support the 620+ RWH / 550+ RWT that Cy's car makes. In a collaborative effort between us (FI), Exedy directly and our transmission builder, we are working to create a package that is specifically for the JR710E "AKA" 7AT. As soon as I have the transmission back in hand, we will schedule the first possible track day to further our testing.

Thanks.
-Tony

Hey tony any news with regards to the GT-R exhaust system under work?

brucelidat · 05-05-2015, 10:49 AM

Quote:

Originally Posted by F.I. Inc.

Please contact us for pricing on the Flex Plate. As for the transmission, it is currently being reworked. We found that the stock replacement amount of Exedy clutches are not enough to support the 620+ RWH / 550+ RWT that Cy's car makes. In a collaborative effort between us (FI), Exedy directly and our transmission builder, we are working to create a package that is specifically for the JR710E "AKA" 7AT. As soon as I have the transmission back in hand, we will schedule the first possible track day to further our testing.

Thanks.
-Tony

Was it enough to handle non e-85 power levels below 500 whp? If people aren't planning to go e85, would there be a less expensive transmission upgrade option that can handle the normal 91 octane power levels?

critical · 04-24-2015, 01:03 AM

in for 7AT info

04-09-2015, 01:44 PM	#1 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 15	With a good tune and 93 or higher octane gas you will always be able to extract more power but if you only have 91 available then stick with that and keep it around 450-500 whp with a conservative tune which is usually what many here do running 91 pump gas. Last edited by VSS370z; 04-09-2015 at 03:36 PM.

04-10-2015, 10:14 AM	#4 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3399	^Fuel system, cooling, and tuning. Get those right and you've no reason to worry __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

04-20-2015, 03:08 PM	#5 (permalink)
Rob298mx Base Member Join Date: Aug 2014 Location: NH Posts: 91 Drives: 2010 Nissan 370z Rep Power: 12	Just put my order in today __________________ 2010 Nissan 370z F.I. TT

04-20-2015, 05:19 PM	#10 (permalink)
Rob298mx Base Member Join Date: Aug 2014 Location: NH Posts: 91 Drives: 2010 Nissan 370z Rep Power: 12	You're the man Tony. Walking through the process with someone with such knowledge speaks volumes for their reputation. Thanks again! __________________ 2010 Nissan 370z F.I. TT

04-24-2015, 01:03 AM	#15 (permalink)
critical A True Z Fanatic Join Date: Oct 2012 Location: Washington Posts: 1,252 Drives: 09' 370z 7AT Rep Power: 17	in for 7AT info __________________ Quaife w/ gears \|Stillen Gen 3\|SOLD FI Resonated Test Pipes \|SOLD FI 18'' \| 25row Stillen Race \| Progress 35mm/25mm sways \| Swifts/Koni\|Volk G25's\| Stoptech SS lines\|\|SPL Front/Rear Arms\|

04-10-2015, 10:12 AM	#3 (permalink)
VSS370z Enthusiast Member Join Date: Apr 2012 Location: Puerto Rico Posts: 380 Drives: 09 Nissan 370z CY M6 Rep Power: 15	Basically don't skip on supporting mods.

04-22-2015, 11:47 PM	#11 (permalink)
reldas Base Member Join Date: Aug 2011 Location: Sydney Posts: 144 Drives: 09 Nissan 370z auto Rep Power: 15	Hey Tony are you going to make a new thread for the 7AT upgrades when they are available to purchase?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here