Fast Intentions "Twin Turbo Kit" is here

djtodd · 10-24-2014, 09:17 PM

I'm sure one of the certified installers can give more accurate numbers, but I would assume somewhere in the realm of 25 hours of labor for the kit. Extras will be over and above that of course, but with the motor out it's the best/most cost effective time to do them.

expired · 10-24-2014, 09:25 PM

valid point in terms of the motor already being pulled. thank you very much for your input.

Hotrodz · 10-24-2014, 09:41 PM

I would plan for at least 10K on parts and labor over and beyond the price of the kit, but not less than 6 to do it right and you want to do it right!

jwick · 10-24-2014, 10:11 PM

Quote:

Originally Posted by Hotrodz

I would plan for at least 10K on parts and labor over and beyond the price of the kit, but not less than 6 to do it right and you want to do it right!

That's wisdom right there. I've got $6-8k above my kit in 'others'

brucelidat · 10-24-2014, 10:26 PM

This was a few months ago before they devleoped the 7AT support mods, but Tony told me 18k was a safe number for parts, labor and some AT upgrades. Not sure if that's till the case now that they have something close to developed, though.

RoyaltyB · 10-25-2014, 12:33 AM

Quote:

Originally Posted by Hotrodz

I would plan for at least 10K on parts and labor over and beyond the price of the kit, but not less than 6 to do it right and you want to do it right!

Absolutely on point. To add to that, F.I. will make sure you do it right for whatever your goals are and they will not have you spend more than your build requires.

faceglide · 11-07-2014, 08:01 PM

Another week, another 200 miles, 13psi and loving life my friends! Weather cooled up just enough to feel a nice jump in response too! I just cannot say enough!

the wide r888s are blowing my mind right now. Amazing amazing tire. Great wet manners too. They really are putting up a great fight against my 550+wtq(HEY shouldn't my motor have popped by now?!? j/k!), they stay pretty soft in the colder temps too, I am truly impressed.

The mission for 1k+hp is in action my friends, block is purchased, crank is coming next and Tony has me dreaming in an exciting direction with this car. I couldnt be happier to have Tony and Seb@SZ taking the Z to an insane level and "playing with the horses" next year!

Stay boosted and stay SAFE my friends. This will be an exciting winter, no doubt about it!

PS: just installed some status racing Ring seats, omfg, having that direct connect to the car(no more sitting on seat springs), makes the acceleration of the car twice as intense. Threw the wife in the passenger and jesus the screams! God I love this car!

faceglide · 11-07-2014, 08:03 PM

I forgot to mention, NOT A SINGLE ISSUE YET, no CEL, no hesitiation, no smoke, nothing, drives like stock, if stock was 630hp/550ft lb car with a loud whoosh every time I let off the pedal and insane spool up/down noises haha. Thanks so much Tony!

Super Werty · 11-07-2014, 08:56 PM

Put up some new pics of your tires!

TerribleONE · 11-07-2014, 09:00 PM

Man I need E85...

elperuano · 11-07-2014, 09:15 PM

^same here.

F.I. Inc. · 11-09-2014, 03:46 PM

Quote:

Originally Posted by TerribleONE

Man I need E85...

Good things come to those who wait!

1slow370 · 11-10-2014, 11:33 AM

can this kit be diy'd? like is there a manual for it?

theDreamer · 11-10-2014, 11:34 AM

Saw a nice picture on Instagram this weekend of a shiny red bar.

TerribleONE · 11-10-2014, 11:35 AM

Quote:

Originally Posted by 1slow370

can this kit be diy'd? like is there a manual for it?

Yes Tony spent HOURS working on a set of instructions.

Buy one so we can see what those cams do for the boosted guys!

10-24-2014, 09:17 PM	#2866 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3399	***Fast Intentions "Twin Turbo Kit" is here*** I'm sure one of the certified installers can give more accurate numbers, but I would assume somewhere in the realm of 25 hours of labor for the kit. Extras will be over and above that of course, but with the motor out it's the best/most cost effective time to do them. 1cleanZ and DEpointfive0 like this. __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

10-24-2014, 09:41 PM	#2868 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I would plan for at least 10K on parts and labor over and beyond the price of the kit, but not less than 6 to do it right and you want to do it right! 1cleanZ, jwick and Sales@F.I. Inc. like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

10-24-2014, 10:26 PM	#2870 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 32	This was a few months ago before they devleoped the 7AT support mods, but Tony told me 18k was a safe number for parts, labor and some AT upgrades. Not sure if that's till the case now that they have something close to developed, though. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

11-07-2014, 08:01 PM	#2872 (permalink)
faceglide Track Member Join Date: Sep 2012 Location: san jose Posts: 550 Drives: '12 370Z FI TT BkChr Rep Power: 38	Another week, another 200 miles, 13psi and loving life my friends! Weather cooled up just enough to feel a nice jump in response too! I just cannot say enough! the wide r888s are blowing my mind right now. Amazing amazing tire. Great wet manners too. They really are putting up a great fight against my 550+wtq(HEY shouldn't my motor have popped by now?!? j/k!), they stay pretty soft in the colder temps too, I am truly impressed. The mission for 1k+hp is in action my friends, block is purchased, crank is coming next and Tony has me dreaming in an exciting direction with this car. I couldnt be happier to have Tony and Seb@SZ taking the Z to an insane level and "playing with the horses" next year! Stay boosted and stay SAFE my friends. This will be an exciting winter, no doubt about it! PS: just installed some status racing Ring seats, omfg, having that direct connect to the car(no more sitting on seat springs), makes the acceleration of the car twice as intense. Threw the wife in the passenger and jesus the screams! God I love this car! TerribleONE, F.I. Inc., Trips and 6 others like this. Last edited by faceglide; 11-07-2014 at 08:11 PM. Reason: english wuz hard

11-07-2014, 08:03 PM	#2873 (permalink)
faceglide Track Member Join Date: Sep 2012 Location: san jose Posts: 550 Drives: '12 370Z FI TT BkChr Rep Power: 38	I forgot to mention, NOT A SINGLE ISSUE YET, no CEL, no hesitiation, no smoke, nothing, drives like stock, if stock was 630hp/550ft lb car with a loud whoosh every time I let off the pedal and insane spool up/down noises haha. Thanks so much Tony! TerribleONE, F.I. Inc., N8GTOL and 2 others like this. Last edited by faceglide; 11-07-2014 at 08:11 PM.

10-24-2014, 09:25 PM	#2867 (permalink)
expired Base Member Join Date: Apr 2012 Location: wisconsin Posts: 4 Drives: winter beater Rep Power: 14	valid point in terms of the motor already being pulled. thank you very much for your input.

11-07-2014, 08:56 PM	#2874 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 14	Put up some new pics of your tires! __________________ The Build

11-07-2014, 09:00 PM	#2875 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5851	Man I need E85... F.I. Inc., elperuano, Super Werty and 1 others like this. __________________ 638WHP 541WTQ @ 13.5PSI Build thread

11-07-2014, 09:15 PM	#2876 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	^same here.

11-10-2014, 11:33 AM	#2878 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	can this kit be diy'd? like is there a manual for it? __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

11-10-2014, 11:34 AM	#2879 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	Saw a nice picture on Instagram this weekend of a shiny red bar. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here