Stillen SC Build 500 WHP?

Nissan370 · 10-29-2012, 10:23 PM

maybe i can buy the cog set up off you

ZKraken22 · 10-29-2012, 09:54 AM

Question is was the same dyno used for the 412 number?

ANMVQ · 10-29-2012, 04:57 PM

Quote:

Originally Posted by ZKraken22

Question is was the same dyno used for the 412 number?

Yes it was

, same dyno and tuner.

ZKraken22 · 10-29-2012, 09:57 AM

With longtube headers you Could see a additional 20 HP. No? Or does the stillen kit not work With headers?

ANMVQ · 10-30-2012, 11:15 AM

nissan370, PM'd man,,

Here are the dyno sheets of before and after, I only have the Dynamics ones, VERY low reading machine, 50 WHP lower than the mustang they had used down the street, Before impeller was 362(412) after was 407(457). I was therre this morning and talked to the tuner about the numbers to make sure this was right. You can see the gains are made all the way through the entire band. This is the same machine I had the 412 WHP chart from just different calibration, Not a mustang reading, He would have had to restap the car down today for get that, But the gains are there

, On their Dynamics is a HUGE thing to make over 400 WHP.

Nut_N_Much · 10-30-2012, 06:53 PM

Quote:

Originally Posted by ANMVQ

nissan370, PM'd man,,

Here are the dyno sheets of before and after, I only have the Dynamics ones, VERY low reading machine, 50 WHP lower than the mustang they had used down the street, Before impeller was 362(412) after was 407(457). I was therre this morning and talked to the tuner about the numbers to make sure this was right. You can see the gains are made all the way through the entire band. This is the same machine I had the 412 WHP chart from just different calibration, Not a mustang reading, He would have had to restap the car down today for get that, But the gains are there

, On their Dynamics is a HUGE thing to make over 400 WHP.

Congrats

on your numbers. I've been tracking your progress closely. Happy for you, Now drive

the Sh_t out of it

Subscribed or video bites !

tibal · 10-30-2012, 11:38 AM

Thats awesome to see you got her back in your hands!

We were looking for the car when we were up at the open house a couple weeks back. Great numbers too considering we saw a bunch of cars posting loowww results. Props!

ANMVQ · 10-30-2012, 01:49 PM

Quote:

Originally Posted by tibal

Thats awesome to see you got her back in your hands!

We were looking for the car when we were up at the open house a couple weeks back. Great numbers too considering we saw a bunch of cars posting loowww results. Props!

Yea thanx man, I wanted to go, Just couldnt get myself to go with out the car

. Yea their dyno is lloowww, AHHAHA.

ANMVQ · 10-31-2012, 08:26 AM

Dyno vid is coming.

Nissan370 · 11-02-2012, 09:36 PM

you got a pm and payment

EVOHUNTER · 11-03-2012, 11:28 AM

doppppee, glad u got it running Air to Air is soon to come!

ANMVQ · 11-03-2012, 03:14 PM

Thanx EVO, Dyno vid is QuickTime, I don't have quick time on my laptop and I can't download via my phone, Crap!!

WillVHR · 08-17-2015, 02:12 AM

I saw a guy post on VQ|Nation Facebook page with Stillen sc G37 who pushed 452 whp and 398 wtq on Z1 motorsports tune. It's all in the tune. If you do it right you can reach 500 whp. I'm running 8 psi and Im about to upgrade to Eagle forged rods and Wiseco 9:1 forged pistons. Hopefully I can boost up to 500. Currently sitting at 414 whp on the can tune and I'm installing fb heat exchanger. Church is gonna do my tune.

jchammond · 08-17-2015, 03:28 AM

Quote:

Originally Posted by WillVHR

I saw a guy post on VQ|Nation Facebook page with Stillen sc G37 who pushed 452 whp and 398 wtq on Z1 motorsports tune. It's all in the tune. If you do it right you can reach 500 whp. I'm running 8 psi and Im about to upgrade to Eagle forged rods and Wiseco 9:1 forged pistons. Hopefully I can boost up to 500. Currently sitting at 414 whp on the can tune and I'm installing fb heat exchanger. Church is gonna do my tune.

Keep updating; as you can see-it's been almost 3 years since a comment was made on this post/i'm currently stock & prefer the SC over the Turbo because of having an automatic.
Tune does make the difference; i've seen one set-up that had 550whp & 409wtq
that would probably push the factory 7speed to the limit's,,,but level 10 has a cure for that.
Keep updating;curious to see how you do-sounds like you can really step up the boost with the bottom end up-graded....the number's i posted was just under 12pounds of boost.

TopgunZ · 08-17-2015, 09:38 AM

Quote:

Originally Posted by jchammond

Keep updating; as you can see-it's been almost 3 years since a comment was made on this post/i'm currently stock & prefer the SC over the Turbo because of having an automatic.
Tune does make the difference; i've seen one set-up that had 550whp & 409wtq
that would probably push the factory 7speed to the limit's,,,but level 10 has a cure for that.
Keep updating;curious to see how you do-sounds like you can really step up the boost with the bottom end up-graded....the number's i posted was just under 12pounds of boost.

Where is this unicorn 550whp 409tq build?

10-29-2012, 10:23 PM	#1 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	maybe i can buy the cog set up off you __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

10-29-2012, 09:54 AM	#2 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 17	Question is was the same dyno used for the 412 number? __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

10-29-2012, 09:57 AM	#4 (permalink)
ZKraken22 A True Z Fanatic Join Date: Jun 2011 Location: Houston Posts: 1,115 Drives: 10 Nissan 370Z 7AT Rep Power: 17	With longtube headers you Could see a additional 20 HP. No? Or does the stillen kit not work With headers? __________________ Litespeed Racing Titanium Cold Air intake// GT Haus Axle// GarageLine combo// Nismo sway bars// Nismo Spoiler // Berk TP's

10-30-2012, 11:38 AM	#7 (permalink)
tibal Track Member Join Date: Dec 2008 Location: Safest Town In America Posts: 987 Drives: TT-370Z and 2.5RS Rep Power: 18	Thats awesome to see you got her back in your hands! We were looking for the car when we were up at the open house a couple weeks back. Great numbers too considering we saw a bunch of cars posting loowww results. Props! __________________ 2010 - PG - M6 - 370zTT 453/409 6lbs IG @TRbal10 TEAM FLY1 MOTORSPORTS

10-31-2012, 08:26 AM	#9 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Dyno vid is coming. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda, Last edited by ANMVQ; 11-03-2012 at 03:12 PM.

11-02-2012, 09:36 PM	#10 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	you got a pm and payment __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

11-03-2012, 11:28 AM	#11 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 16	doppppee, glad u got it running Air to Air is soon to come! __________________

11-03-2012, 03:14 PM	#12 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Thanx EVO, Dyno vid is QuickTime, I don't have quick time on my laptop and I can't download via my phone, Crap!! __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

08-17-2015, 02:12 AM	#13 (permalink)
WillVHR Base Member Join Date: Feb 2012 Location: Irvine, CA Posts: 169 Drives: 2009 G37S 6-MT Rep Power: 14	I saw a guy post on VQ\|Nation Facebook page with Stillen sc G37 who pushed 452 whp and 398 wtq on Z1 motorsports tune. It's all in the tune. If you do it right you can reach 500 whp. I'm running 8 psi and Im about to upgrade to Eagle forged rods and Wiseco 9:1 forged pistons. Hopefully I can boost up to 500. Currently sitting at 414 whp on the can tune and I'm installing fb heat exchanger. Church is gonna do my tune.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whitemtl370's Stillen SC Build Thread	Whitemtl370	Member's 370Z Gallery	5	05-07-2012 08:59 AM
stillen superchge build results	Nissan370	Forced Induction	68	02-13-2012 04:23 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
The EXPENSIVE 370Z Build - Brembo, HRE, JIC, Stillen	vividracing	Member's 370Z Gallery	10	06-03-2009 12:37 AM