Engine Build

Mkai0 · 11-10-2013, 09:23 AM

That's good to know. My tuner suggested I go 10:1 or 9.5:1, I chose the latter. He builds a lot of GTRs, and immediately goes 10:1 when building them. I hope the 9.5:1 will not be too laggy with the GTM TT kit

esfourteen · 11-10-2013, 09:07 PM

choosing compression really depends on what fuel you plan to run and how much boost. i wanted better response off boost and didn't plan on running more than ~18psi on pump, so i chose 10:1

Ron · 11-12-2013, 11:26 AM

Hey Nick, one more question about the gasket kit. Nissan has valve stem oil seals as part of the kit but they are not on your list. Did you reuse yours since you didn't mess with the heads?

Sh0velMan · 11-12-2013, 11:32 AM

Quote:

Originally Posted by Ron

Hey Nick, one more question about the gasket kit. Nissan has valve stem oil seals as part of the kit but they are not on your list. Did you reuse yours since you didn't mess with the heads?

If he didn't disassemble the heads, then he definitely didn't replace those.

(just built a head for an RB)
(big pain in the ***)

Ron · 11-12-2013, 11:36 AM

what I thought, thanks!

esfourteen · 11-12-2013, 02:14 PM

yeah I didn't touch the head, no point.

esfourteen · 11-13-2013, 02:13 PM

So i just heard back from the guys at R.A.D., one of the head gaskets failed, which we knew, but nothing is warped, which is great news. There was also no damage to the bearings and no signs of detonation at all, so the engine is healthy.

Now since the engine is out, time for some upgrades:

Cosworth headgaskets
R.A.D. v-band exhaust manifolds
Tial v-band turbine housings
Tial external wastegates
Re-routing the coolant lines to the turbos
AeroJacket vented hood, being delivered next week.

The plan is to see how this holds up next summer. Assuming theres no overheating issues I will likely upgrade to GTX2867R compressors.

Ron · 11-13-2013, 02:45 PM

pheew! Glad to hear everything is ok!

Chuck33079 · 11-13-2013, 02:49 PM

Quote:

Originally Posted by esfourteen

Re-routing the coolant lines to the turbos.

Please show us how they do this. It's one of the things I'd like to do before next summer.

tibal · 11-13-2013, 02:53 PM

Great to hear. I am nipping at the bit to see those R.A.D manifolds.

Open Dumps.. cough cough.

esfourteen · 11-13-2013, 02:59 PM

Quote:

Originally Posted by tibal

Great to hear. I am nipping at the bit to see those R.A.D manifolds.

Open Dumps.. cough cough.

you'll never catch me running open dumps, sorry dude

tibal · 11-13-2013, 08:52 PM

Quote:

Originally Posted by esfourteen

you'll never catch me running open dumps, sorry dude

Haha I don't blame yah. I have been toying the idea of changing it up myself.

esfourteen · 12-09-2013, 06:35 PM

Small update, I've decided to keep my current manifolds/housings/internal WG's, just upgrading the head gasket, fixing the coolant lines, swain tech for all the exhaust components (previous ceramic coating was not rated high enough and flaked off) and bracing the driver side manifold.

Why brace the manifold? Here's mine after ~10k miles:

That highlighted area would be a crack. Every GTM manifold I've seen that has a few thousand miles on it cracks in this same spot.

The shops fabricator is going to repair this and then make a brace to help support the weight of the turbo from the block. I hope the new GTM manifolds everyone is waiting on no longer have this issue!

tibal · 12-09-2013, 07:51 PM

Cracks Cracks Cracks.. Forgot to ask you today, are your Manifolds Coated as well?

esfourteen · 12-09-2013, 08:46 PM

Quote:

Originally Posted by tibal

Cracks Cracks Cracks.. Forgot to ask you today, are your Manifolds Coated as well?

they were but my coating was **** and didn't hold up well. once they are repaired I'm getting them coated by swaintech

11-10-2013, 09:23 AM	#106 (permalink)
Mkai0 Base Member Join Date: Dec 2010 Location: Somewhere in Texas Posts: 209 Drives: 2008 G35 Sedan Rep Power: 14	That's good to know. My tuner suggested I go 10:1 or 9.5:1, I chose the latter. He builds a lot of GTRs, and immediately goes 10:1 when building them. I hope the 9.5:1 will not be too laggy with the GTM TT kit __________________ Eibach, Tanabe, Blitz, Vertini, GTM stage 1.5 SC, Aquamist, Invidia, Alto built 5AT, Edge Racing, Racelogic, GTM driveshaft, 440 whp in 101F TX heat..

11-10-2013, 09:07 PM	#107 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	choosing compression really depends on what fuel you plan to run and how much boost. i wanted better response off boost and didn't plan on running more than ~18psi on pump, so i chose 10:1 Mkai0 and COSMO like this. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

11-12-2013, 11:26 AM	#108 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	Hey Nick, one more question about the gasket kit. Nissan has valve stem oil seals as part of the kit but they are not on your list. Did you reuse yours since you didn't mess with the heads? __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

11-12-2013, 11:36 AM	#110 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	what I thought, thanks! __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

11-12-2013, 02:14 PM	#111 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	yeah I didn't touch the head, no point. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

11-13-2013, 02:13 PM	#112 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	So i just heard back from the guys at R.A.D., one of the head gaskets failed, which we knew, but nothing is warped, which is great news. There was also no damage to the bearings and no signs of detonation at all, so the engine is healthy. Now since the engine is out, time for some upgrades: Cosworth headgaskets R.A.D. v-band exhaust manifolds Tial v-band turbine housings Tial external wastegates Re-routing the coolant lines to the turbos AeroJacket vented hood, being delivered next week. The plan is to see how this holds up next summer. Assuming theres no overheating issues I will likely upgrade to GTX2867R compressors. tibal, Mr.Squeeze, GaleForce and 1 others like this. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

11-13-2013, 02:45 PM	#113 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	pheew! Glad to hear everything is ok! esfourteen likes this. __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

11-13-2013, 02:53 PM	#115 (permalink)
tibal Track Member Join Date: Dec 2008 Location: Safest Town In America Posts: 987 Drives: TT-370Z and 2.5RS Rep Power: 17	Great to hear. I am nipping at the bit to see those R.A.D manifolds. Open Dumps.. cough cough. __________________ 2010 - PG - M6 - 370zTT 453/409 6lbs IG @TRbal10 TEAM FLY1 MOTORSPORTS

12-09-2013, 06:35 PM	#118 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	Small update, I've decided to keep my current manifolds/housings/internal WG's, just upgrading the head gasket, fixing the coolant lines, swain tech for all the exhaust components (previous ceramic coating was not rated high enough and flaked off) and bracing the driver side manifold. Why brace the manifold? Here's mine after ~10k miles: That highlighted area would be a crack. Every GTM manifold I've seen that has a few thousand miles on it cracks in this same spot. The shops fabricator is going to repair this and then make a brace to help support the weight of the turbo from the block. I hope the new GTM manifolds everyone is waiting on no longer have this issue! tibal and COSMO like this. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

12-09-2013, 07:51 PM	#119 (permalink)
tibal Track Member Join Date: Dec 2008 Location: Safest Town In America Posts: 987 Drives: TT-370Z and 2.5RS Rep Power: 17	Cracks Cracks Cracks.. Forgot to ask you today, are your Manifolds Coated as well? __________________ 2010 - PG - M6 - 370zTT 453/409 6lbs IG @TRbal10 TEAM FLY1 MOTORSPORTS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering: VQ37VHR Engine Build 700HP Power Package	SAM@GTM	Forced Induction	73	10-12-2012 09:46 AM
engine build time	Nissan370	Forced Induction	42	08-05-2012 09:48 AM
370Z For Sale WTB: wrecked 370z with working engine... or engine	travisjb	370Z For Sale	0	01-15-2012 11:47 AM
Pic request: 370z engine bay w/stillen g3's and Seibon engine cover.	atx370z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	20	01-05-2011 12:50 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM