Boosted Performance single turbo build

Sh0velMan · 01-02-2013, 11:29 AM

Quote:

Originally Posted by Boosted Performance

Changing them on my end would not be a big deal. However, I am not sure how the DE headers fit on a VHR engine, and if the flanges sit in the same location at the same angle. I would assume they do, since the same turbo cast manifolds are used on both platforms.

I would be able to check the fitmen on my own 350z as well, since everything on that end should be the same geometrically.

I think the collector flange sits in a slightly different location, that's why Z1 had to make special test pipes to reach the exhaust... I could be totally wrong, but it doesn't make sense why they'd have to make special TP's for them otherwise.

Edit: I can attest to the fact that 350z DE longtubes do fit our cars on a case by case basis though. At least the flanges are in the right spots. (The primaries themselves may interfere with other components though, the particular set we tested fit fine however)

chrischhorn · 01-04-2013, 12:37 AM

Quote:

Originally Posted by Sh0velMan

I think the collector flange sits in a slightly different location, that's why Z1 had to make special test pipes to reach the exhaust... I could be totally wrong, but it doesn't make sense why they'd have to make special TP's for them otherwise.

Edit: I can attest to the fact that 350z DE longtubes do fit our cars on a case by case basis though. At least the flanges are in the right spots. (The primaries themselves may interfere with other components though, the particular set we tested fit fine however)

i installed the momentum headers today with DE OEM cats for the moment until my test pipes come in. everything lined up perfect with no need to modify a thing.the DE cats bolted straight up to my exhaust. the driver side header was a pain the *** to put in though so we had to loosen the motor mount to angle the motor to slide it in but the alignment is the same. i HIGHLY plan on ordering this kit in may so i will just need to request special flanges i guess. i feel like i always ask you on special requests lol. first to ask you about the oem oil cooler and now momentum headers lol. what else can i dig up?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 10:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 10:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 08:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM