GTM Performance Engineering 1000HP MAF CALIBRATIONN -ANOTHER MILE STONE

SAM@GTM · 10-11-2011, 02:34 AM

We would like to share a mile stone we've achieved regarding the stock ECU. Over the last few months we've been working on developing a way to overcome one of the limitations of the stock ECU when it comes to making big power. While Uprev enables the aftermarket to rewrite the stock ECU in the 370Z/G37, there have been a few hurdles to jump when pushing the envelope over 600whp. Since day one, we always kept in mind that people will only want more power. In anticipation, we chose to use 3" MAF piping in all of our turbo kits and the GTM Stage 2 Supercharger Kit. Doing that gives us more headroom when it comes to MAF Voltage. It's a mechanical calibration that allows us to get the factory MAF to read more airflow. Even at 600whp, the MAF voltage is getting up to 4.9 to 4.95 Volts. While this is still below the 5 Volt limit, it does not give us any headroom to compensate for changing atmospheric conditions (such as a cold morning). The next step was to find an aftermarket MAF sensor that can replace the factory Nissan unit with the same physical dimensions and connector. Of course, that was the easy part. The challenging part is to produce a good calibration that contains a linear MAF curve so we can get the best resolution and still plenty of headroom for more horsepower while retaining factory drivability. This development translates into having a 1000hp car that starts up every time and can be driven normally on the street.

Ultimately, this has greatly expanded the capabilities of the factory ECU to the level of performance commonly relegated to a standalone EMS. While some standalone EMS options may have some additional features that set it apart, we've really narrowed the gap here.

To close the gap altogether, we are working on developing a system that will enable us to retard ignition timing in response to knock as well as boost cut. Once that is developed, there will be no reason for a standalone EMS in this platform.

Here is a dyno graph and a cipher screenshot showing only 4.5 volts maf reading @ 886 RWHP witch is equivalent to roughly about 1036 BHP .

Will be posting up a video of the car on dyno shortly .

Sam

Deadman · 10-11-2011, 06:19 AM

Amazing.. great job guys !

bullitt5897 · 10-11-2011, 07:25 AM

Love it! The car sounds mean as hell as always!

wheee! · 10-11-2011, 07:31 AM

Congrats! ... and thank you for your innovation.

Black370ZTT · 10-11-2011, 07:41 AM

Happy Hanukkah Marv

Zemurray · 10-11-2011, 07:55 AM

damn. That's impressive!

John@Z1 · 10-11-2011, 09:09 AM

Very nice! Thanks for letting me have the title for highest hp Osiris for a week

.

christian370z · 10-11-2011, 09:15 AM

This thread is for all the White Dragon haters. Great job Sam and everyone at GTM, my hat is off to you!

Cell · 10-11-2011, 09:35 AM

Great work but I can't seem to get any sound out of the video.

bullitt5897 · 10-11-2011, 12:34 PM

Thanks guys! Sam and team have been doing extensive research with my car! Alot of new innovations will come from GTM and this project.

Cell, the sound works... See if your speakers are plugged in... Hehe also that there not muted either on ur desktop.

Nixlimited · 10-11-2011, 12:52 PM

Great job Sam and team! I am surprised with that much power and that much negative rear camber that you aren't having major issues with slippage on the dyno roller.

Cell · 10-11-2011, 01:59 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

Thanks guys! Sam and team have been doing extensive research with my car! Alot of new innovations will come from GTM and this project.

Cell, the sound works... See if your speakers are plugged in... Hehe also that there not muted either on ur desktop.

It's working now. It was because firefox was acting weird.

Ron · 10-11-2011, 02:14 PM

Quote:

Originally Posted by SAM@GTM

To close the gap altogether, we are working on developing a system that will enable us to retard ignition timing in response to knock as well as boost cut. Once that is developed, there will be no reason for a standalone EMS in this platform.

Isn't that what the J&S Safeguard does? I was looking into getting one for my build but after talking to some shops the conclusion was that the 370Z adjusts timing pretty well in response to knock... I still want to get the unit for peace of mind though.

Thank you Sam and GTM for bringing new products to the community and its good to finally see the white dragon on a dyno. Congrats Bullit!

NYBladeZ · 10-11-2011, 02:22 PM

She's alive! 4.5 liters and twin turbo yummy-ness!

DIGItonium · 10-11-2011, 02:55 PM

Wow! Sick!!! So happy to see it come alive! This is with the VR38 plenum as well? It sounds great, and that is a very nice plot!

10-11-2011, 02:34 AM	#1 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 17	GTM Performance Engineering 1000HP MAF CALIBRATIONN -ANOTHER MILE STONE We would like to share a mile stone we've achieved regarding the stock ECU. Over the last few months we've been working on developing a way to overcome one of the limitations of the stock ECU when it comes to making big power. While Uprev enables the aftermarket to rewrite the stock ECU in the 370Z/G37, there have been a few hurdles to jump when pushing the envelope over 600whp. Since day one, we always kept in mind that people will only want more power. In anticipation, we chose to use 3" MAF piping in all of our turbo kits and the GTM Stage 2 Supercharger Kit. Doing that gives us more headroom when it comes to MAF Voltage. It's a mechanical calibration that allows us to get the factory MAF to read more airflow. Even at 600whp, the MAF voltage is getting up to 4.9 to 4.95 Volts. While this is still below the 5 Volt limit, it does not give us any headroom to compensate for changing atmospheric conditions (such as a cold morning). The next step was to find an aftermarket MAF sensor that can replace the factory Nissan unit with the same physical dimensions and connector. Of course, that was the easy part. The challenging part is to produce a good calibration that contains a linear MAF curve so we can get the best resolution and still plenty of headroom for more horsepower while retaining factory drivability. This development translates into having a 1000hp car that starts up every time and can be driven normally on the street. Ultimately, this has greatly expanded the capabilities of the factory ECU to the level of performance commonly relegated to a standalone EMS. While some standalone EMS options may have some additional features that set it apart, we've really narrowed the gap here. To close the gap altogether, we are working on developing a system that will enable us to retard ignition timing in response to knock as well as boost cut. Once that is developed, there will be no reason for a standalone EMS in this platform. Here is a dyno graph and a cipher screenshot showing only 4.5 volts maf reading @ 886 RWHP witch is equivalent to roughly about 1036 BHP . Will be posting up a video of the car on dyno shortly . Sam Last edited by SAM@GTM; 10-11-2011 at 02:45 AM.

10-11-2011, 07:25 AM	#3 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Love it! The car sounds mean as hell as always! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-11-2011, 07:31 AM	#4 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40181	Congrats! ... and thank you for your innovation. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

10-11-2011, 07:41 AM	#5 (permalink)
Black370ZTT Base Member Join Date: Nov 2009 Location: Maryland Age: 33 Posts: 47 Drives: A TT,Nothing special Rep Power: 15	Happy Hanukkah Marv __________________ AAM Twin Turbo Kit, 500hp/400TQ UPrev "America is all about speed. Big, nasty, bad a$$ speed." Roosevelt

10-11-2011, 09:09 AM	#7 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 19	Very nice! Thanks for letting me have the title for highest hp Osiris for a week . __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

10-11-2011, 06:19 AM	#2 (permalink)
Deadman Base Member Join Date: May 2011 Location: Ohio Posts: 177 Drives: 2011 370z Base+S 6MT Rep Power: 13	Amazing.. great job guys !

10-11-2011, 07:55 AM	#6 (permalink)
Zemurray Base Member Join Date: Sep 2011 Location: La Grange, KY Posts: 117 Drives: 78 280z, 40th 370z Rep Power: 13	damn. That's impressive!

10-11-2011, 09:15 AM	#8 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	This thread is for all the White Dragon haters. Great job Sam and everyone at GTM, my hat is off to you! __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

10-11-2011, 09:35 AM	#9 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 21	Great work but I can't seem to get any sound out of the video.

10-11-2011, 12:34 PM	#10 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Thanks guys! Sam and team have been doing extensive research with my car! Alot of new innovations will come from GTM and this project. Cell, the sound works... See if your speakers are plugged in... Hehe also that there not muted either on ur desktop. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-11-2011, 12:52 PM	#11 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 25	Great job Sam and team! I am surprised with that much power and that much negative rear camber that you aren't having major issues with slippage on the dyno roller. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

10-11-2011, 02:22 PM	#14 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	She's alive! 4.5 liters and twin turbo yummy-ness! __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

10-11-2011, 02:55 PM	#15 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Wow! Sick!!! So happy to see it come alive! This is with the VR38 plenum as well? It sounds great, and that is a very nice plot! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond	SAM@GTM	Forced Induction	1588	08-20-2011 11:19 AM
GTM Performance Engineering Supercharger CARB kit Test Car Needed	SAM@GTM	Southern California Region	11	11-09-2010 07:02 PM
GTM Performance Engineering Supercharger CARB kit Test Car Needed	SAM@GTM	Forced Induction	26	10-14-2010 02:49 PM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 12:07 AM