First top mount single turbo 370Z

Mr&Mrs · 08-24-2011, 12:47 AM

Looks like I was on to something asking you how the voltages checked out. Thats all that was adding up in my head. Glad it turned out better then our texts started! I will get in touch with you again tomorrow. By the way were those wires even soldered?

98intrigue · 08-24-2011, 12:55 AM

Quote:

Originally Posted by Isamu

Dude, Lutz needs to step up and stop being douchewads and compensate you some.. i mean it was their fault this all happened in the 1st place... Im pretty sure GTM, or any other quality company would hook you up. sorry you went through all of this, but man, Im really glad to hear your almost at 100%

I edited my rant... I forgot they took 2hrs of labor off my bill when they installed my Flexalite fans.

98intrigue · 08-24-2011, 12:56 AM

Quote:

Originally Posted by Mr&Mrs

Looks like I was on to something asking you how the voltages checked out. Thats all that was adding up in my head. Glad it turned out better then our texts started! I will get in touch with you again tomorrow. By the way were those wires even soldered?

Yeah, I kept putting that thought into the back of my head BECAUSE LUTZ ASSURED ME THE MAF WIRING WOULD BE FINE. I think the pictures speak for themselves.

Isamu · 08-24-2011, 01:10 AM

Quote:

Originally Posted by 98intrigue

I edited my rant... I forgot they took 2hrs of labor off my bill when they installed my Flexalite fans.

I would call BS, call the BBB an let them explain the mess...

b1adesofcha0s · 08-24-2011, 07:52 AM

Quote:

Originally Posted by Isamu

I would call BS, call the BBB an let them explain the mess...

Deadman · 08-24-2011, 08:55 AM

Sad story.. so in the end the mafs are back to stock and never had to be touched ? Sigh feel for ya man

b1adesofcha0s · 08-24-2011, 09:02 AM

Heard car is running now, awesome!

98intrigue · 08-24-2011, 09:03 AM

Quote:

Originally Posted by Deadman

Sad story.. so in the end the mafs are back to stock and never had to be touched ? Sigh feel for ya man

Due to the bad design of their intake piping, the MAFs were reading different voltages. Instead of redoing the intake piping like how it is now and the way that I suggested, they said it would be better to bridge the MAFs. They did...and the car never ran better. It may have helped to get it retuned, but why would I pay to get it retuned if I wasn't sure the bridging of the MAFs would fix the issue?

So I had the piping redone the CORRECT way and when I called Lutz to ask how to unbridge the MAFs, they said just to cut the bridge they had wired....so I did cut it and that's why the car was in limp mode because 2 wires weren't even connected into the MAF sensor.

Deadman · 08-24-2011, 09:28 AM

Ya I have a buddy who builds turbo kits, and he was looking at ideas for single turbo build on my car. This would b down the road but I will def be using your build thread for tips on what to do and what not to do !

Red__Zed · 08-24-2011, 11:18 AM

Bridging the mafs was a huge hack-- that was known since day one. Same with the unequal length piping.
Sorry to hear you had to go through this, but at least this shop is getting some accurate publicity for once.

daisuke149 · 08-24-2011, 11:36 AM

Hey Ryan, its been the biggest headache for you im sure, but seems you are in better hands now and hopefully you get this thing running soon. Just remember! once its up and running, dont touch the dang thing and enjoy it for a while!

98intrigue · 08-24-2011, 12:07 PM

Quote:

Originally Posted by Red__Zed

Bridging the mafs was a huge hack-- that was known since day one. Same with the unequal length piping.
Sorry to hear you had to go through this, but at least this shop is getting some accurate publicity for once.

You can say you told me so... go ahead

Red__Zed · 08-24-2011, 12:22 PM

Quote:

Originally Posted by 98intrigue

You can say you told me so... go ahead

I don't even want to. Having been down that road before, I feel for you. I'm pissed at the shop for your sake--it's not your job to know when they're being idiots.

98intrigue · 08-24-2011, 12:52 PM

I just drove my car to work, since I went home for lunch. No CEL! No limp mode! No 10.0 AFR under partial throttle. I'm happy

Quote:

Originally Posted by daisuke149

Hey Ryan, its been the biggest headache for you im sure, but seems you are in better hands now and hopefully you get this thing running soon. Just remember! once its up and running, dont touch the dang thing and enjoy it for a while!

Then what do I do with the CSF radiator in my trunk or the Stance coilovers that are sitting in my garage? Haha

b1adesofcha0s · 08-24-2011, 12:54 PM

Quote:

Originally Posted by 98intrigue

I just drove my car to work, since I went home for lunch. No CEL! No limp mode! No 10.0 AFR under partial throttle. I'm happy

Then what do I do with the CSF radiator in my trunk or the Stance coilovers that are sitting in my garage? Haha

Good to hear! Send them to me for free, I will take care of them

08-24-2011, 12:47 AM	#721 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,194 Drives: RZ34 Rep Power: 18518	Looks like I was on to something asking you how the voltages checked out. Thats all that was adding up in my head. Glad it turned out better then our texts started! I will get in touch with you again tomorrow. By the way were those wires even soldered? __________________ Project Z <--Click - Check out the link too many mods to list!

08-24-2011, 09:02 AM	#727 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Heard car is running now, awesome! __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS/FT: 300zx w/ Skyline GTR RB26 Single Turbo Swap 5 Speed	Z-Creations	Cars for sale (Private Classifieds)	0	01-23-2011 02:06 PM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 02:53 PM
*370z needed: Single turbo kit development*	Chris@FsP	Texas	0	01-06-2010 02:05 PM
300ZX vs. Single Turbo Supras	Mercennarius	Other Vehicles	9	09-14-2009 08:59 PM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM

08-24-2011, 08:55 AM	#726 (permalink)
Deadman Base Member Join Date: May 2011 Location: Ohio Posts: 177 Drives: 2011 370z Base+S 6MT Rep Power: 13	Sad story.. so in the end the mafs are back to stock and never had to be touched ? Sigh feel for ya man

08-24-2011, 09:28 AM	#729 (permalink)
Deadman Base Member Join Date: May 2011 Location: Ohio Posts: 177 Drives: 2011 370z Base+S 6MT Rep Power: 13	Ya I have a buddy who builds turbo kits, and he was looking at ideas for single turbo build on my car. This would b down the road but I will def be using your build thread for tips on what to do and what not to do !

08-24-2011, 11:18 AM	#730 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	Bridging the mafs was a huge hack-- that was known since day one. Same with the unequal length piping. Sorry to hear you had to go through this, but at least this shop is getting some accurate publicity for once.

08-24-2011, 11:36 AM	#731 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	Hey Ryan, its been the biggest headache for you im sure, but seems you are in better hands now and hopefully you get this thing running soon. Just remember! once its up and running, dont touch the dang thing and enjoy it for a while!