New GTM stage 2 TT build

jnaut · 05-13-2011, 08:36 PM

ok, guys the base tune was installed to keep it safe to drive. There were zero issues with the install but the waste gates are allowing to much boost. Im going to pull them off tomorrow and check the spring pressures and re adjust them. it spiked to 11 psi for a split second then we shut it down. This is not a big ill have it squared away tomorrow then we will have the actual numbers, but it did make 300hp @ 4k rpm. ill have videos up tomorrow, the car sounds amazing. such a piece of art work . congrats billy

98intrigue · 05-13-2011, 08:40 PM

Quote:

Originally Posted by jnaut

ok, guys the base tune was installed to keep it safe to drive. There were zero issues with the install but the waste gates are allowing to much boost. Im going to pull them off tomorrow and check the spring pressures and re adjust them. it spiked to 11 psi for a split second then we shut it down. This is not a big ill have it squared away tomorrow then we will have the actual numbers, but it did make 300hp @ 5k rpm. ill have videos up tomorrow, the car sounds amazing. such a piece of art work . congrats billy

Small issue...can't wait to see what the final numbers are!

Ps I made 411hp @4700rpms before the MAF was maxed out

tranceformer · 05-13-2011, 08:41 PM

wow, its been a big week for turbo 370Z's!

congrats billy!

jnaut · 05-13-2011, 08:46 PM

Quote:

Originally Posted by 98intrigue

Small issue...can't wait to see what the final numbers are!

Ps I made 411hp @4700rpms before the MAF was maxed out

hummm... Mr. Ryan

hahaha

jnaut · 05-13-2011, 08:47 PM

ryan , you are correct as it is a small issue as it runs and drive like stock .

KaienZ34 · 05-13-2011, 10:14 PM

DIGItonium · 05-14-2011, 11:16 AM

How much boost are you guys planning to run? The shop working on my car is planning to set it to the absolute minimum (6.5 PSI?) with this kit. Since I won't be getting an EVC, I may make the best of this kit and at least switch out the stock cats for an F.I. HFC.

So I'm assuming this is going to be close to 450 whp on 91 octane?

BTW... how does the car cope with boost spike or creep as mentioned?

jnaut · 05-14-2011, 01:43 PM

All issues have been corrected, we are going back to the rollers in an hour or so. Right now its set at 6 psi, we will see how the tuning goes possible turn up the boost a little.

jnaut · 05-14-2011, 01:46 PM

Quote:

Originally Posted by DIGItonium

How much boost are you guys planning to run? The shop working on my car is planning to set it to the absolute minimum (6.5 PSI?) with this kit. Since I won't be getting an EVC, I may make the best of this kit and at least switch out the stock cats for an F.I. HFC.

So I'm assuming this is going to be close to 450 whp on 91 octane?

BTW... how does the car cope with boost spike or creep as mentioned?

Yes i would suggest a high flow cat or TP, we do have 93 octane here but we will not see 450 hp on this very low reading mustang dyno, atleast not at 6 psi. If you run a EBC your boost creep should not be an issue as spiking it will a little bit but settle back at the 6psi mark.

tranceformer · 05-14-2011, 01:57 PM

Maybe this one won't spin on the dyno like that last GTM TT 370Z!!

DIGItonium · 05-14-2011, 01:58 PM

Quote:

Originally Posted by jnaut

Yes i would suggest a high flow cat or TP, we do have 93 octane here but we will not see 450 hp on this very low reading mustang dyno, atleast not at 6 psi. If you run a EBC your boost creep should not be an issue as spiking it will a little bit but settle back at the 6psi mark.

Oops! I was speaking with incorrect assumptions. I should've meant 100-150 whp gain at 6-6.5 PSI. Hopefully I can get away without an EBC to keep things simple for this daily driver... it's not driven very hard, but the extra pep is nice when getting on the freeway, brief passes, and going through an intersection (i.e., this car lacks a bit of low end grunt to move quickly off the line).

Some drive by vids please! I want to hear the sound. BTW... I may have missed it in this thread. What's the wastegate setup for this build? Just wondering if the OP will be able to hear the turbo spooling. It's hard to hear in some of the vids.

jnaut · 05-14-2011, 03:03 PM

He has internal waste gates, as for hearing the turbos no problem

jnaut · 05-14-2011, 03:03 PM

Quote:

Originally Posted by tranceformer

Maybe this one won't spin on the dyno like that last GTM TT 370Z!!

yes, it spun the tires on the dyno this time also , hahaha

jnaut · 05-14-2011, 03:08 PM

ok, the results are in 441hp/332tq to the wheels @ 8.5 psi. Now remember this is on an extremely low reading mustang dyno. I feel its an honest assumption to say on a dynodynamic its output would be 470 to 480 hp to the wheel. Billy's cars in an animal, runs drives like stock until you get into the skinny pedal.

98intrigue · 05-14-2011, 04:02 PM

^Sickkkk!!!

05-13-2011, 08:36 PM	#121 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	ok, guys the base tune was installed to keep it safe to drive. There were zero issues with the install but the waste gates are allowing to much boost. Im going to pull them off tomorrow and check the spring pressures and re adjust them. it spiked to 11 psi for a split second then we shut it down. This is not a big ill have it squared away tomorrow then we will have the actual numbers, but it did make 300hp @ 4k rpm. ill have videos up tomorrow, the car sounds amazing. such a piece of art work . congrats billy __________________ Best 1/4 mile 12.24 Best mph 114.5_______ Last edited by jnaut; 05-13-2011 at 08:40 PM.

05-13-2011, 08:41 PM	#123 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 267	wow, its been a big week for turbo 370Z's! congrats billy! __________________ Ray 2009 370Z Base Sport 6MT / 12.860 @ 109.09mph / 1.921 60ft / street tires official 1/4 mile track times

05-13-2011, 08:47 PM	#125 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	ryan , you are correct as it is a small issue as it runs and drive like stock . __________________ Best 1/4 mile 12.24 Best mph 114.5_______

05-13-2011, 10:14 PM	#126 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	__________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

05-14-2011, 11:16 AM	#127 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	How much boost are you guys planning to run? The shop working on my car is planning to set it to the absolute minimum (6.5 PSI?) with this kit. Since I won't be getting an EVC, I may make the best of this kit and at least switch out the stock cats for an F.I. HFC. So I'm assuming this is going to be close to 450 whp on 91 octane? BTW... how does the car cope with boost spike or creep as mentioned? __________________

05-14-2011, 01:43 PM	#128 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	All issues have been corrected, we are going back to the rollers in an hour or so. Right now its set at 6 psi, we will see how the tuning goes possible turn up the boost a little. __________________ Best 1/4 mile 12.24 Best mph 114.5_______

05-14-2011, 01:57 PM	#130 (permalink)
tranceformer A True Z Fanatic Join Date: Nov 2008 Location: Palm Beach, FL Posts: 1,213 Drives: 2009 370Z PW 6MT Rep Power: 267	Maybe this one won't spin on the dyno like that last GTM TT 370Z!! __________________ Ray 2009 370Z Base Sport 6MT / 12.860 @ 109.09mph / 1.921 60ft / street tires official 1/4 mile track times

05-14-2011, 03:03 PM	#132 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	He has internal waste gates, as for hearing the turbos no problem __________________ Best 1/4 mile 12.24 Best mph 114.5_______

05-14-2011, 03:08 PM	#134 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	ok, the results are in 441hp/332tq to the wheels @ 8.5 psi. Now remember this is on an extremely low reading mustang dyno. I feel its an honest assumption to say on a dynodynamic its output would be 470 to 480 hp to the wheel. Billy's cars in an animal, runs drives like stock until you get into the skinny pedal. __________________ Best 1/4 mile 12.24 Best mph 114.5_______

05-14-2011, 04:02 PM	#135 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 38 Posts: 4,855 Drives: 2014 Viper Rep Power: 429	^Sickkkk!!! __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Supercharger Stage 1 w/ F.I. LTH	theDreamer	Forced Induction	140	03-16-2013 04:50 PM
Stage 4 turbo and hood clearance	NYBladeZ	Forced Induction	56	02-04-2012 02:50 PM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 10:34 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
RGM Stage 1 (Need Some Help)	alexpila	Tuning	1	02-01-2010 11:09 AM