GTM TWIN TURBO kit: 2009 370Z 539WHP/490RWTQ-WATER INJECTED TORQUE MONSTER

SAM@GTM · 09-01-2010, 02:00 AM

This was one of our development cars for our twin turbo kit, Recently we have installed an Aquamist water/meth injection system on the car and did some tuning on 91 Octane pump gas so we thought I'll share some results with you guys.
Currently we are only injecting distilled water via two nozzles in each MAF pipe and so far the car is responding very well to the the added timing we are running. Also we are planing on switching to a direct port injection set up once our GTR manifold is ready then we will be injecting water and meth and push the car a little more .

Here is the list of mods on the car and the dyno graphs

GTM Stage 2 Turn-Key Twin Turbo System
GTM 3" Turbo Cat-back exhaust
GTM Oil Pan Spacer
GTM 3" Downpipes w/ External waste gates
GTM Diff cooler
GTM Competetion oil cooler
GTM Stainless Braided Clutch line
GTM ECU reflash via Osiris uprev
OS Giken Twin Plate Dampened clutch/flywheel kit
HKS EVC6 Boost Controller
HKS KNOCK AMP
Aquamist water/meth injection

Sam

And here is some pics of a direct injection set up

WarmAndSCSI · 09-01-2010, 02:04 AM

Nice direct methanol injection setup! Gives me ideas for my new Evo build... hmmm

SAM@GTM · 09-01-2010, 02:08 AM

Quote:

Originally Posted by WarmAndSCSI

Nice direct methanol injection setup! Gives me ideas for my new Evo build... hmmm

Playing with water injection is a lot fun, it is truly amazing of what you can do with simply just adding water.

Sam

Jamaica · 09-01-2010, 02:25 AM

I'm glad the water injection worked. Open up a world of new ideas nows. Needs to add this in my kit now.

JDMFairlady21 · 09-01-2010, 08:47 AM

Nice stuff Sam! Send me the email

fuct · 09-01-2010, 10:04 AM

now thats a torque number i like!!!!!

Jordo! · 09-01-2010, 11:32 AM

For pure det supression, you can't beat running straight water.

To pick up any power with the methanol, you'd probably have to spray enough to handle some of the basic fueling.

FuszNissan · 09-01-2010, 11:42 AM

Where's the MAF's?

JB-370z · 09-01-2010, 12:44 PM

SAM you just keep adding to the list of "THINGS TO BUY", my wife hates you!

JK

On another note I cannot wait to see the GTR manifold!!!

toner123 · 09-01-2010, 12:57 PM

hey sam what is allowing for such the high tq. Is it mainly the water/meth injection or the external waste gates.
Frank

JB-370z · 09-01-2010, 01:01 PM

Quote:

Originally Posted by toner123

hey sam what is allowing for such the high tq. Is it mainly the water/meth injection or the external waste gates.
Frank

I just read that dyno and those TQ numbers are not playing around.

WarmAndSCSI · 09-01-2010, 01:04 PM

Quote:

Originally Posted by toner123

hey sam what is allowing for such the high tq. Is it mainly the water/meth injection or the external waste gates.
Frank

Guessing they are doing a bit of semi-lean spooling with some aggressive timing. That and the boost curve may taper a bit.

NYBladeZ · 09-01-2010, 01:24 PM

I think the boost does taper a little bit but that's probably an issue that will be resolved with the direct port GTR manifold. From those graph it looks like HP peaks at 6300rpm with max torque at 4500rpm. Given enough time I'm sure Sam with get that torque curve must flatter after 4500rpm and keep the HP climbing till the redline.

RCZ · 09-01-2010, 01:25 PM

badass, Must be amazing to have all that torque.

ROC1ROB · 09-01-2010, 03:21 PM

So you're spraying water in the engine? Won't the pistons rust?

J/K J/K Nice work Sam!!! Glad to see you guys keep leading the way!!!

GTM FTW

09-01-2010, 02:00 AM	#1 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 18	GTM TWIN TURBO kit: 2009 370Z 539WHP/490RWTQ-WATER INJECTED TORQUE MONSTER This was one of our development cars for our twin turbo kit, Recently we have installed an Aquamist water/meth injection system on the car and did some tuning on 91 Octane pump gas so we thought I'll share some results with you guys. Currently we are only injecting distilled water via two nozzles in each MAF pipe and so far the car is responding very well to the the added timing we are running. Also we are planing on switching to a direct port injection set up once our GTR manifold is ready then we will be injecting water and meth and push the car a little more . Here is the list of mods on the car and the dyno graphs GTM Stage 2 Turn-Key Twin Turbo System GTM 3" Turbo Cat-back exhaust GTM Oil Pan Spacer GTM 3" Downpipes w/ External waste gates GTM Diff cooler GTM Competetion oil cooler GTM Stainless Braided Clutch line GTM ECU reflash via Osiris uprev OS Giken Twin Plate Dampened clutch/flywheel kit HKS EVC6 Boost Controller HKS KNOCK AMP Aquamist water/meth injection Sam And here is some pics of a direct injection set up Last edited by SAM@GTM; 09-01-2010 at 02:04 AM.

09-01-2010, 02:04 AM	#2 (permalink)
WarmAndSCSI A True Z Fanatic Join Date: May 2010 Location: SLC, UT Posts: 1,671 Drives: '08 Evo X \| '10 370Z Rep Power: 19	Nice direct methanol injection setup! Gives me ideas for my new Evo build... hmmm __________________ '10 PW 370Z 7AT - wife's car - Project Raspberry Cheesecake '08 Evo X - built motor+trans \| BB-X @ 32 psi \| CH3OH \| self-built+tuned - ??? WHP '01 Galant V6 - built motor \| GT35R \| self-built+tuned - 550+ WHP (retired)

09-01-2010, 08:47 AM	#5 (permalink)
JDMFairlady21 Enthusiast Member Join Date: Oct 2009 Location: LI, NY Posts: 348 Drives: 03 Z33 TT Redline Rep Power: 16	Nice stuff Sam! Send me the email __________________ [

09-01-2010, 11:32 AM	#7 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 419	For pure det supression, you can't beat running straight water. To pick up any power with the methanol, you'd probably have to spray enough to handle some of the basic fueling. __________________ Enjoy it. Destroy it.

09-01-2010, 11:42 AM	#8 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 543	Where's the MAF's? __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

09-01-2010, 02:25 AM	#4 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 74	I'm glad the water injection worked. Open up a world of new ideas nows. Needs to add this in my kit now.

09-01-2010, 10:04 AM	#6 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 25	now thats a torque number i like!!!!!

09-01-2010, 12:44 PM	#9 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 20	SAM you just keep adding to the list of "THINGS TO BUY", my wife hates you! JK On another note I cannot wait to see the GTR manifold!!! __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

09-01-2010, 12:57 PM	#10 (permalink)
toner123 Track Member Join Date: May 2010 Location: chesapeake va Age: 40 Posts: 823 Drives: TT 370z Touring/SP Rep Power: 17	hey sam what is allowing for such the high tq. Is it mainly the water/meth injection or the external waste gates. Frank

09-01-2010, 01:24 PM	#13 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 21	I think the boost does taper a little bit but that's probably an issue that will be resolved with the direct port GTR manifold. From those graph it looks like HP peaks at 6300rpm with max torque at 4500rpm. Given enough time I'm sure Sam with get that torque curve must flatter after 4500rpm and keep the HP climbing till the redline. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

09-01-2010, 01:25 PM	#14 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	badass, Must be amazing to have all that torque.

09-01-2010, 03:21 PM	#15 (permalink)
ROC1ROB Base Member Join Date: May 2010 Location: AZ Posts: 201 Drives: 09 MT BS Base/Sports Rep Power: 16	So you're spraying water in the engine? Won't the pistons rust? J/K J/K Nice work Sam!!! Glad to see you guys keep leading the way!!! GTM FTW

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2009 370Z Twin Turbo aka. The Red Dragon	FuszNissan	370Z For Sale	99	02-24-2012 04:12 PM
Twin Turbo 370Z	CDM	Australia/New Zealand	1	12-13-2009 06:57 PM
Seabass 370z Twin Turbo	370zTwinTurbo	New Forum Member	22	09-29-2009 09:23 AM
GTM Twin Turbo 370z	evse82	Australia/New Zealand	6	09-22-2009 11:05 AM
Twin Turbo Kit for 370z	soaka1	Engine & Drivetrain	3	05-14-2009 07:31 AM