STILLEN 370Z Supercharger System - Announcement!!!

weiboy718

quick pic of my oil temp and oil pressure installed.

Zsteve

Nice, that would make the little piggy go WEI WEI WEI all the way home. looks clean too.

__________________
2010 LS3 C6 Silver coupe corvette

weiboy718

lol!

SE

Joebarchuck

How did you get this to work? I imagine this requires some programming...

__________________
Red 2010 370Z Roadster: Stillen G3, Stillen Exhaust, Up-Rev Tune (312 RWHP), Eibach Pro Springs, 20mm spacers front and back, Rear Camber Kit, Tinted Windows, GT-R Start Button, Interior Mods

theDreamer

No, he is using HKS Camp 2 unit, plugs in and can read your ECU and display information. Has add ons which can read things the ECU does not report (boost, temps, etc.)

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

Osiris

But for us noobs...how does it integrate with the NAV system? Is it a disc you put in to install the program? So is there a hardware and software piece to it?

__________________

^^^^^^^^^Like our Facebook!^^^^^^^^^

toner123

No. It uses your OBDII port. How it works is you hook it up to power through any where that comes on in ACC. Connect the box to your ODBII port and then connect it to the aux inputs that are in your center console. After that just need to calibrate and switch your nav screen over to aux that way you can view it. The only thing I am not sure about that maybe others know is what wire you have to put into ground, since once you put the car in gear and start moving all Aux inputs will get cut out for safety reasons. Just like how you can't enter info in to the navi while driving. It is really simple to hook up. But from my research the Blitz one is a better buy then the HKS camp II so you might want to look into that. it's only a few more bucks and has alot more features built in that the HKS would require additional purchase of sensors for.
hope this helps
Frank

weiboy718

What I did was I used a module called navtool, it borrows your oem nav screen so you can hook up anything you want to see. You'll need to wire this to a 12 volt and ground souce. The monitoring system is called HKS Camp2 and it connects directly on your oem obdII port, you don't need to hook up any 12volts on the camp2, the car will power it through the obd port.

No disc and no software needed.