GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

SAM@GTM · 05-03-2010, 03:25 PM

Quote:

Originally Posted by LiquidZ

Sam, I was wondering if you can clarify something:

I noticed in your original post you posted dyno graphs for 8 psi with a stock exhaust. You just recently posted dyno graphs showing the results for a 4mm smaller pulley and a new CBE. However, it still shows 8 psi on the graph.
Is there a typo somewhere?

We are still running 8 Psi boost as you can see in the video. Lowering the pulley 4mm did put the blower at max efficiency. So between Improving the exhaust flow and a smaller pulley the car made very good improvement, The process of doing this was slow and very time consuming but it was very rewarding at the end as you can see .

Sam

CGMobile370Z · 05-03-2010, 04:50 PM

Quote:

Originally Posted by SAM@GTM

We are still running 8 Psi boost as you can see in the video. Lowering the pulley 4mm did put the blower at max efficiency. So between Improving the exhaust flow and a smaller pulley the car made very good improvement, The process of doing this was slow and very time consuming it it was very rewarding at the end as you can see .

Sam

Sam you kicka**, taking it to the next level!

shumby · 05-03-2010, 02:32 PM

what would the typo be? Do you think he is running more psi now? I think the only thing he was trying to show was the gains with the CBE. at the same PSI. If you watch the vid it is only at 8 PSI on the readout.

LiquidZ · 05-03-2010, 02:42 PM

Quote:

Originally Posted by shumby

what would the typo be? Do you think he is running more psi now? I think the only thing he was trying to show was the gains with the CBE. at the same PSI. If you watch the vid it is only at 8 PSI on the readout.

I tried watching the video on my iphone but the resolution sucked. I'll head home and check it out.

I was wondering if the the 8 psi on the bottom of the new dyno charts was a typo as he said he was running a 4 mm smaller pulley.

LiquidZ · 05-03-2010, 07:24 PM

I just watched the video again at a better resolution. I definitely don't see that needle climbing above 8 psi. Thanks for the clarification Sam.

I really like telemetry you are including in these videos. Keep up the good work!

SAM@GTM · 05-03-2010, 10:20 PM

Quote:

Originally Posted by LiquidZ

I just watched the video again at a better resolution. I definitely don't see that needle climbing above 8 psi. Thanks for the clarification Sam.

I really like telemetry you are including in these videos. Keep up the good work!

We are still working on couple more videos, This is only the beginning.

Sam

370z4Steve · 05-05-2010, 03:37 PM

Quote:

Originally Posted by SAM@GTM

We are still working on couple more videos, This is only the beginning.

Sam

Hurry SAM

lets see TT or SC now? SC looking very promising to me..

SAM@GTM · 05-07-2010, 05:06 AM

Quote:

Originally Posted by 370z4Steve

Hurry SAM

lets see TT or SC now? SC looking very promising to me..

Here we go, Fresh off the press..

Sam

370z4Steve · 05-07-2010, 03:55 PM

Quote:

Originally Posted by SAM@GTM

Here we go, Fresh off the press..

Sam

Great job Sam..I can only imagine if you got your hands on a GTR to see what you would come up with...!

JB-370z · 05-07-2010, 05:00 PM

Quote:

Originally Posted by SAM@GTM

Here we go, Fresh off the press..

Sam

This thing sounds more like a turbo with blow off valves than it does a supercharger. Dam this is very nice Sam. Why does it sound like it have BBV's???

puckshaw · 05-07-2010, 05:21 PM

Quote:

Originally Posted by SAM@GTM

Here we go, Fresh off the press..

Sam

oontz...oontz...oontz...oontz...oontz...

Sweet video

Can't wait til I can save up the cash for this kit

ARFCOM · 09-29-2010, 06:55 PM

Quote:

Originally Posted by SAM@GTM

Here we go, Fresh off the press..

Sam

Can you please post a version with out that music??

Very interested so far though.

Zsteve · 05-04-2010, 11:38 PM

so Sam have you done any 0 60 or 1/4 mile times yet?

SAM@GTM · 05-05-2010, 10:52 AM

Quote:

Originally Posted by Zsteve

so Sam have you done any 0 60 or 1/4 mile times yet?

Yes,We have a lot more data to share and we will post it up real soon.

Sam

shumby · 05-05-2010, 11:14 AM

woot.

05-03-2010, 02:32 PM	#3 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	what would the typo be? Do you think he is running more psi now? I think the only thing he was trying to show was the gains with the CBE. at the same PSI. If you watch the vid it is only at 8 PSI on the readout. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

05-03-2010, 07:24 PM	#5 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	I just watched the video again at a better resolution. I definitely don't see that needle climbing above 8 psi. Thanks for the clarification Sam. I really like telemetry you are including in these videos. Keep up the good work! __________________

05-04-2010, 11:38 PM	#13 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	so Sam have you done any 0 60 or 1/4 mile times yet? __________________ 2010 LS3 C6 Silver coupe corvette

05-05-2010, 11:14 AM	#15 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	woot. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 12:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 12:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 11:55 PM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 02:32 PM