GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

CBRich · 03-01-2010, 07:14 AM

That is a fantastic deal. I gotta talk to the wife.

bullitt5897 · 03-01-2010, 07:42 AM

Sam! you guys just knocked this one out of the park!!! with that price point you should sell ALOT of kits quick!!!

Red370 · 03-01-2010, 07:51 AM

I was shocked at the pricing, PLEASANTLY shocked, i was expecting somewhere around 7k, bravo GTM, BRAVO.

One_Quick_Z · 03-01-2010, 08:04 AM

WOW Thanks for the info!! That is an amazing price!

I will post this on ChicagoZ to make sure everyone knows

DAN

puckshaw · 03-01-2010, 08:13 AM

Wow this is exactly what I was hoping for! Wonder how long the intro pricing will last. I'm still a little ways off from having enough cash.

Barvo GTM, barvo

Kastley85891 · 03-01-2010, 08:15 AM

Nice work guys
Any ideas on install price (drive off) ? with the fair deal here, install costs are more reachable ;-)

Fuel upgrade costing, I assume , single pump , 600cc DW injectors etc.
Will you have relevant starter maps for the popular tuning platforms?
PM if you want.
Cheers

m4a1mustang · 03-01-2010, 08:32 AM

Quote:

Originally Posted by Red370

I was shocked at the pricing, PLEASANTLY shocked, i was expecting somewhere around 7k, bravo GTM, BRAVO.

I think you'll still end up around $7k if you try to "do it right" as it were. Think clutch/flywheel, gauge setup, and perhaps some installation cost.

Still, $5k for a turn-key kit that puts out 420whp is very sweet. I was, like you, expecting to see something in the $7k range.

RCZ · 03-01-2010, 08:35 AM

I like what you did with the recirc, clever placement!

Got any pictures with the bumper on??

Good pricing too, its exactly what I expected.

Few quick questions...

1) Which trim is that in the picture? Looks like a tight squeeze already, wondering how the bigger ones will fit?

2) 90* elbow after a flattened intake tube and two 90* elbows on the way to the intercooler?

3) Hydrolocking concerns with the filters at the lowest point on the car?

4) Does that oil cooler sit behind the stock bumper?

5) What kind of dyno? What did the stock 370z put down on it?

6) Spellcheck

JB-370z · 03-01-2010, 08:39 AM

Sam you are going to sell tons of kits!!! Well done. As far as the Nissan aftermarket goes, I think I would take you guys for parts over stillen any day of the week. Masterminds in the Nissan/infiniti market, pure genius, congrats!

m4a1mustang · 03-01-2010, 08:39 AM

Raul,

My guess is going to be that hydrolock isn't much of a concern. Even with the "bulkheads" removed I don't think spray is going to be a big problem (the filters are far enough off into the corner of the bumper area that it's going to be tough for a significant amount of spray to make it's way over there.

I'm sure it will be fine unless you drive through deep water.

As for 2... I think you're right. Probably not ideal but my guess is it's the best solution possible given the space available.

Z eliminator · 03-01-2010, 09:15 AM

well done

Z eliminator

DannyGT · 03-01-2010, 09:24 AM

Nice, I'm in!

2fast4thelaw · 03-01-2010, 09:28 AM

WOW!

Good work Sam

I am actually very happy to eat my words from my previous predictions. I did not expect this kit to come in at 5K but I am very happy that it did. Damn it Sam, Now I am going to have to re-think the whole SC vs TT setup again after I thought I had my mind made up. I love how clean it looks under the hood and it sounds really sweet! Either way I go, without question GTM is getting my money!

I am very impressed with the results at stage1 on stock exhaust.

Let me add, NICE machine work! I am very impressed!

shumby · 03-01-2010, 09:29 AM

hey Z if you are talking to Sam again get him to get me an e-mail he has my address. I cannot call him as I am in russia. I want the preposal he promised me. Really excited now

RCZ · 03-01-2010, 09:32 AM

Quote:

Originally Posted by m4a1mustang

Raul,

My guess is going to be that hydrolock isn't much of a concern. Even with the "bulkheads" removed I don't think spray is going to be a big problem (the filters are far enough off into the corner of the bumper area that it's going to be tough for a significant amount of spray to make it's way over there.

I'm sure it will be fine unless you drive through deep water.

As for 2... I think you're right. Probably not ideal but my guess is it's the best solution possible given the space available.

Yeah man, my bumper is less than 4 fingers off the ground... 6" of water and that lower intake is submerged. I have seen waaaay deeper puddles around here. I'm just thinking what would happen if I had no choice but to go through something deep?

And yes, it was the best solution...if you put the sc there.

Quote:

Originally Posted by Z eliminator

well done

Z eliminator

Steve, looks like you're gonna be making quite a nice amount of power! Congrats and you must post pics and review when you get it!

03-01-2010, 07:42 AM	#17 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	Sam! you guys just knocked this one out of the park!!! with that price point you should sell ALOT of kits quick!!! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-01-2010, 07:51 AM	#18 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 297	I was shocked at the pricing, PLEASANTLY shocked, i was expecting somewhere around 7k, bravo GTM, BRAVO. __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

03-01-2010, 08:04 AM	#19 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 220	WOW Thanks for the info!! That is an amazing price! I will post this on ChicagoZ to make sure everyone knows DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

03-01-2010, 08:15 AM	#21 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Nice work guys Any ideas on install price (drive off) ? with the fair deal here, install costs are more reachable ;-) Fuel upgrade costing, I assume , single pump , 600cc DW injectors etc. Will you have relevant starter maps for the popular tuning platforms? PM if you want. Cheers __________________ Boosted V8 hunter 2850 lbs and 375WHP Last edited by Kastley85891; 03-01-2010 at 08:33 AM.

03-01-2010, 08:35 AM	#23 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	I like what you did with the recirc, clever placement! Got any pictures with the bumper on?? Good pricing too, its exactly what I expected. Few quick questions... 1) Which trim is that in the picture? Looks like a tight squeeze already, wondering how the bigger ones will fit? 2) 90* elbow after a flattened intake tube and two 90* elbows on the way to the intercooler? 3) Hydrolocking concerns with the filters at the lowest point on the car? 4) Does that oil cooler sit behind the stock bumper? 5) What kind of dyno? What did the stock 370z put down on it? 6) Spellcheck Last edited by RCZ; 03-01-2010 at 08:38 AM.

03-01-2010, 07:14 AM	#16 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 545	That is a fantastic deal. I gotta talk to the wife.

03-01-2010, 08:13 AM	#20 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Wow this is exactly what I was hoping for! Wonder how long the intro pricing will last. I'm still a little ways off from having enough cash. Barvo GTM, barvo

03-01-2010, 08:39 AM	#24 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 20	Sam you are going to sell tons of kits!!! Well done. As far as the Nissan aftermarket goes, I think I would take you guys for parts over stillen any day of the week. Masterminds in the Nissan/infiniti market, pure genius, congrats! __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

03-01-2010, 08:39 AM	#25 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6963	Raul, My guess is going to be that hydrolock isn't much of a concern. Even with the "bulkheads" removed I don't think spray is going to be a big problem (the filters are far enough off into the corner of the bumper area that it's going to be tough for a significant amount of spray to make it's way over there. I'm sure it will be fine unless you drive through deep water. As for 2... I think you're right. Probably not ideal but my guess is it's the best solution possible given the space available. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-01-2010, 09:15 AM	#26 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	well done Z eliminator __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

03-01-2010, 09:24 AM	#27 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 280	Nice, I'm in! __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

03-01-2010, 09:28 AM	#28 (permalink)
2fast4thelaw Enthusiast Member Join Date: Feb 2009 Location: Denver Co Age: 51 Posts: 403 Drives: 09 370Z Sport/MT6 Rep Power: 17	WOW! Good work Sam I am actually very happy to eat my words from my previous predictions. I did not expect this kit to come in at 5K but I am very happy that it did. Damn it Sam, Now I am going to have to re-think the whole SC vs TT setup again after I thought I had my mind made up. I love how clean it looks under the hood and it sounds really sweet! Either way I go, without question GTM is getting my money! I am very impressed with the results at stage1 on stock exhaust. Let me add, NICE machine work! I am very impressed! __________________ To the optimist, the glass is half full. To the pessimist, the glass is half empty. To the engineer, the glass is twice as big as it needs to be.

03-01-2010, 09:29 AM	#29 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	hey Z if you are talking to Sam again get him to get me an e-mail he has my address. I cannot call him as I am in russia. I want the preposal he promised me. Really excited now __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 12:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 12:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 11:55 PM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 02:32 PM