Topgunz Rotrex Kit Texas Build.

TopgunZ · 09-07-2021, 07:37 AM

Looking good Frank! Yes, the intake to the SC is a bit of work but its better than the other options. Look at my ACE kit thread and the issues guys are having to deal with in order to run a filter, or worse, not run a filter.

FrankEtier · 09-09-2021, 12:31 PM

Got some cooler temps in Texas and lower humidity this week so I'm making a final push. Planning on first startup this weekend with Eugene. Last night I worked on getting the cold side piping installed and the MAF sensors. Expecting the final 2 parts from Topgunz to deliver tomorrow and I can install the serpentine belt and Mac Solenoid.

Couple Pics of progress below.

Anhhuy88 · 09-09-2021, 07:12 PM

Can't wait to see the final results.

FrankEtier · 09-10-2021, 10:09 PM

99% ready to run. First start tomorrow afternoon. Got a couple small things still to take care of in morning.

alecp2016 · 09-11-2021, 12:30 PM

Lookin good! Best of luck today!

FrankEtier · 09-12-2021, 07:30 AM

Up and running. Eugene got the Z going around 1 yesterday. Made a short run to gas station since I was on E. Today I’m going to upload a tune revision, put front bumper/undertray back on and get some miles/data log. Current tune is for 10psi on 93. Will go to 15psi/E85 in coming weeks.

redondoaveb · 09-12-2021, 09:10 AM

Quote:

Originally Posted by FrankEtier

Up and running. Eugene got the Z going around 1 yesterday. Made a short run to gas station since I was on E. Today I’m going to upload a tune revision, put front bumper/undertray back on and get some miles/data log. Current tune is for 10psi on 93. Will go to 15psi/E85 in coming weeks.

I see it made 692 at 15 psi

FrankEtier · 09-12-2021, 12:32 PM

He must be referring to a different car. No Dyno yet or anything. Just barely up and running yesterday.

VHRpurr · 09-12-2021, 12:37 PM

Saw the video on your IG just now of your car idling. Clean idle, and clean car. Nice work! Stealthy!

redondoaveb · 09-12-2021, 01:44 PM

Quote:

Originally Posted by FrankEtier

He must be referring to a different car. No Dyno yet or anything. Just barely up and running yesterday.

That makes sense. Now that you mention it, I think there was a g37 if I remember right that made that power. I've been following your build and I didn't see you post any numbers yet

FrankEtier · 09-12-2021, 02:36 PM

Next drive Eugene wants 4th gear 3k to 6k WOT. Will see how car likes that then full pull after that.
Noticed oil temps up about 15-20 degrees with supercharger compared to NA. 25 row oil cooler might not be enough now?

TopgunZ · 09-12-2021, 02:57 PM

Quote:

Originally Posted by redondoaveb

I see it made 692 at 15 psi

Pat, that was birdies car.

redondoaveb · 09-12-2021, 03:37 PM

Quote:

Originally Posted by TopgunZ

Pat, that was birdies car.

Hey Aaron. Was that the G37?

redondoaveb · 09-12-2021, 03:38 PM

Quote:

Originally Posted by FrankEtier

Next drive Eugene wants 4th gear 3k to 6k WOT. Will see how car likes that then full pull after that.
Noticed oil temps up about 15-20 degrees with supercharger compared to NA. 25 row oil cooler might not be enough now?

Is your oil cooler sandwiched between the IC and radiator?

FrankEtier · 09-12-2021, 05:16 PM

Quote:

Originally Posted by redondoaveb

Is your oil cooler sandwiched between the IC and radiator?

That is correct. I’m kind of out of room up there. Doesn’t seem ideal. Oil temps around 200 now instead of 180 on a 90 degree Texas day. Still better than 220 I was seeing prior to oil cooler.

09-07-2021, 07:37 AM	#16 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Looking good Frank! Yes, the intake to the SC is a bit of work but its better than the other options. Look at my ACE kit thread and the issues guys are having to deal with in order to run a filter, or worse, not run a filter. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

09-11-2021, 12:30 PM	#20 (permalink)
alecp2016 Base Member Join Date: Apr 2016 Location: Texas, Houston area Posts: 3 Drives: 11 370Z PW Sport M6 Rep Power: 11	Lookin good! Best of luck today! __________________ 2011 370Z Sport M6 Pearl White

09-12-2021, 12:32 PM	#23 (permalink)
FrankEtier Base Member Join Date: Jul 2019 Location: McKinney, TX Age: 50 Posts: 145 Drives: 2014 370Z SC Rep Power: 11606	He must be referring to a different car. No Dyno yet or anything. Just barely up and running yesterday. ZontheRocks and redondoaveb like this. __________________ ‘14 Topgunz Speedworks Rotrex Supercharged VR30 7AT 370Z Magma Red. @liquid.magma

09-12-2021, 12:37 PM	#24 (permalink)
VHRpurr Base Member Join Date: Dec 2019 Location: Northlake, TX Posts: 75 Drives: 16 NISMO 370Z M6 Rep Power: 7	Saw the video on your IG just now of your car idling. Clean idle, and clean car. Nice work! Stealthy! ZontheRocks and FrankEtier like this.

09-12-2021, 02:36 PM	#26 (permalink)
FrankEtier Base Member Join Date: Jul 2019 Location: McKinney, TX Age: 50 Posts: 145 Drives: 2014 370Z SC Rep Power: 11606	Next drive Eugene wants 4th gear 3k to 6k WOT. Will see how car likes that then full pull after that. Noticed oil temps up about 15-20 degrees with supercharger compared to NA. 25 row oil cooler might not be enough now? ZontheRocks and redondoaveb like this. __________________ ‘14 Topgunz Speedworks Rotrex Supercharged VR30 7AT 370Z Magma Red. @liquid.magma

09-09-2021, 07:12 PM	#18 (permalink)
Anhhuy88 Base Member Join Date: Oct 2016 Location: Tx Posts: 37 Drives: G37 coupe Rep Power: 10	Can't wait to see the final results.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*Topgunz ROTREX C38R Supercharger Kit*	TopgunZ	Forced Induction	589	07-03-2025 10:51 PM
[FOR SALE] Rotrex C38-81/92	jmroy6	Parts for sale (Private Classifieds)	4	05-12-2020 09:37 PM
WTB Rotrex SC	jmroy6	Wanted	0	12-14-2019 10:22 AM
Rotrex Oil Flow?	pokeyl	Forced Induction	9	12-22-2015 08:55 AM