|
The Z1 kit also uses a bypass valve on the wrong side of the intercooler. It sits on top and the hot charge air is coming in from the bottom
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-24-2023, 10:10 AM
|
#21 (permalink) |
|
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6835   |
The Z1 kit also uses a bypass valve on the wrong side of the intercooler. It sits on top and the hot charge air is coming in from the bottom meaning all of the HOT air coming from the supercharger is constantly being driven through the intercooler soaking it with heat and never giving it a chance to cool off. This is a terrible idea which will look good on the dyno since they let it cool down with the car off then hit it with one pull. On the street/track that intercooler will always be hot.
They also strung that motor out to 8000 rpm on their run which most guys are never going to do so the numbers are there for show...again.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New Rotrex C38R Supercharger | R3drckt09 | Forced Induction | 145 | 02-05-2023 08:37 AM |
| rotrex c38r spec sheet | tiller | Forced Induction | 11 | 09-13-2018 11:57 AM |
| Rotrex C38R & are HR/VHR GTM SC mounting brackets the same? | SS_Firehawk | Engine & Drivetrain | 6 | 02-09-2018 10:33 PM |
| Replacement Rotrex Supercharger for the GTM Stage 1 kit | wind.zero | Forced Induction | 29 | 06-03-2014 06:20 AM |
| [FOR SALE] Rotrex C38-81 Supercharger Only | pokeyl | Parts for sale (Private Classifieds) | 3 | 02-17-2014 09:07 AM |
764Likes
Threaded Mode
