Who else on here is on the list for BP’s new twin kit?

Nvrdun

Here's a view from the front after trying to squeeze it in. The bottom on the driver side is digging in to the rad support without the oil cooler in place.

Sent from my SM-N950U using Tapatalk

BettyZ

Your best option is to mark off the areas making contact, then use an angle grinder with a cutting wheel and just start cutting. Took BP three tries to send me the right brackets. I still had to do some judicious cutting to make it all fit. Only have two holes on each bracket, cut the bottoms off the brackets and the IC

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods