Topgunz Ace A2A Install

G37xMN · 08-30-2020, 04:52 PM

I’ve recently picked up my A2A Ace kit from Topgunz. Figured I’d start a build thread.

G37xMN · 08-30-2020, 04:59 PM

So far I’ve relocated the coolant overflow, deleted the relay box, and currently working on relocating power steering cooler and removing drive belt. Little progress but at least there’s some

G37xMN · 08-31-2020, 10:23 PM

Got the supercharger mounted and put the turboguard on after I took this

G37xMN · 09-01-2020, 02:22 AM

These plugs were new about 5,300 miles ago. I’ve yet to check the other 5 plugs, but I pulled one to see how it looks and it’s half charred, half white. I looked it up quick and read on some Honda forum that my timing could be off just a tad or something in the combustion chamber such as valves could be bad. Anyone have any insight? I’ve just been running a fast intentions catback along with test pipes the whole time. Tuned by seb.

TopgunZ · 09-01-2020, 07:23 AM

Looking good! It will be nice to get this on the dyno with some lower ambient temps. We made our pull in 94* when we made 615whp here. The AWD and AT will bring down some numbers but this E85 build is going to be awesome.

G37xMN · 09-24-2020, 07:25 PM

Got my 1300cc injectors and gtr plugs in. Test fitting the piping now. Just waiting on BOV and Fuel Return System.

DUSHER · 09-25-2020, 11:55 AM

Quote:

Originally Posted by G37xMN

Got my 1300cc injectors and gtr plugs in. Test fitting the piping now. Just waiting on BOV and Fuel Return System.

Wait. Wheres the BOV opening? Did Topgunz change the kit?

G37xMN · 09-25-2020, 01:26 PM

Quote:

Originally Posted by DUSHER

Wait. Wheres the BOV opening? Did Topgunz change the kit?

Yep, it’s now on the top of the intercooler on passenger side.

G37xMN · 09-25-2020, 01:49 PM

You can see the flange in this photo

DUSHER · 09-25-2020, 10:00 PM

Quote:

Originally Posted by G37xMN

You can see the flange in this photo

mother fucker lol. Topgunz please trade me this intercooler lol. I can stand the chirping.

JVerge5363 · 09-26-2020, 12:05 AM

Quote:

Originally Posted by DUSHER

mother fucker lol. Topgunz please trade me this intercooler lol. I can stand the chirping.

Mine is in the same spot but on the backside of the intercooler and I still get the chirping

G37xMN · 09-26-2020, 12:36 AM

Quote:

Originally Posted by JVerge5363

Mine is in the same spot but on the backside of the intercooler and I still get the chirping

I was hoping this wouldn’t be the case D:

G37xMN · 08-22-2021, 09:59 PM

Well, the cars been sitting for quite some time now. I was waiting on a buddy of mine to help with a lot of it but he recently got engaged and had a kid so hasn't had much time. With that being said, another buddy of mine and I have just decided to take on the majority of the install ourselves, starting with gauges.

I went with AEM Wideband, Oil Pressure, Water Temp, and Boost. These are currently working. By this I mean you can turn the ignition on and they'll light up. As for the actual functionality of the gauges, Wideband and Water Temp are hooked up, and I'm just waiting on an extra AEM harness to extend the other two sets of gauge wires to where I need them.
IMG_2267.jpg

We installed a 34 row Setrab core for the Engine Oil and a 19 row for the Transmission. I just went ahead and bought the Oil Cooler Kit from Z1 and it was a breeze. The included instructions answered any questions about the install. For the trans I ordered a 19 row Setrab core, 2x M22 to -10 adapter, 2x -10 to -8 reducers, 2x -6 90* push lock fittings, and some 3/8 braided line. There's a factory trans cooler hose that runs from the radiator to a hardline. Removed factory hose, ran one of my braided lines to the trans cooler fitting off the radiator, and the other to the hardline that's on the other end of the said cooler hose.
Image-1.jpg

My fuel pump is installed in the pump housing already and I believe all the modifications are done to it. All we have left to do is run the fuel lines for the RFS, figure out how to reassemble the fuel pump housing, and figure out how to hook up all the lines to the aftermarket fuel pressure regulator. As well as mounting up intercooler/bov. One more good weekend and I think it'll be ready for tuning

08-30-2020, 04:52 PM	#1 (permalink)
G37xMN Base Member Join Date: Jan 2020 Location: Minnesta Posts: 27 Drives: ACE 2012 G37x Sedan Rep Power: 5	Topgunz Ace A2A Install I’ve recently picked up my A2A Ace kit from Topgunz. Figured I’d start a build thread. BOLIO 671, scratchdvinyl, Rusty and 6 others like this.

09-01-2020, 07:23 AM	#5 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Looking good! It will be nice to get this on the dyno with some lower ambient temps. We made our pull in 94* when we made 615whp here. The AWD and AT will bring down some numbers but this E85 build is going to be awesome. G37xMN likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-22-2021, 09:59 PM	#13 (permalink)
G37xMN Base Member Join Date: Jan 2020 Location: Minnesta Posts: 27 Drives: ACE 2012 G37x Sedan Rep Power: 5	Well, the cars been sitting for quite some time now. I was waiting on a buddy of mine to help with a lot of it but he recently got engaged and had a kid so hasn't had much time. With that being said, another buddy of mine and I have just decided to take on the majority of the install ourselves, starting with gauges. I went with AEM Wideband, Oil Pressure, Water Temp, and Boost. These are currently working. By this I mean you can turn the ignition on and they'll light up. As for the actual functionality of the gauges, Wideband and Water Temp are hooked up, and I'm just waiting on an extra AEM harness to extend the other two sets of gauge wires to where I need them. IMG_2267.jpg We installed a 34 row Setrab core for the Engine Oil and a 19 row for the Transmission. I just went ahead and bought the Oil Cooler Kit from Z1 and it was a breeze. The included instructions answered any questions about the install. For the trans I ordered a 19 row Setrab core, 2x M22 to -10 adapter, 2x -10 to -8 reducers, 2x -6 90* push lock fittings, and some 3/8 braided line. There's a factory trans cooler hose that runs from the radiator to a hardline. Removed factory hose, ran one of my braided lines to the trans cooler fitting off the radiator, and the other to the hardline that's on the other end of the said cooler hose. Image-1.jpg My fuel pump is installed in the pump housing already and I believe all the modifications are done to it. All we have left to do is run the fuel lines for the RFS, figure out how to reassemble the fuel pump housing, and figure out how to hook up all the lines to the aftermarket fuel pressure regulator. As well as mounting up intercooler/bov. One more good weekend and I think it'll be ready for tuning NorthStyle and ZontheRocks like this. __________________ Vortech V3 SI \| A2A Intercooler \| FI Catback + Test Pipes \| ID1300 \| FRS W Flex Fuel \| Black Flag 450 \| Tial BOV \| GTR Plugs \| Hotchkis Sway Bars \| Setrab 34 Row Oil and Trans Coolers \| Ecutek \| Sebastian @ SpecialtyZ Last edited by G37xMN; 08-22-2021 at 10:15 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz - air to air upgrade	TopgunZ	Forced Induction	2797	04-21-2023 09:43 AM
[FOR SALE] TopGunz A2A Gen 1 Supercharger Kit	BOLIO 671	Parts for sale (Private Classifieds)	5	06-04-2020 02:16 AM
[WTB] WTB TopGunz A-A kit	NissanTracker	Parts for sale (Private Classifieds)	2	05-10-2020 12:08 PM
[FOR SALE] topgunz air to air upgrade	DUSHER	Parts for sale (Private Classifieds)	1	01-22-2020 11:27 PM
[FOR SALE] Topgunz Air to Air Kit	chuckie311	Parts for sale (Private Classifieds)	3	11-27-2018 09:26 PM