Nissan 370Z Forum
Page 8 of 15 « First 67 8 910 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Announcing TopgunZ ACE Supercharger Kit! (http://www.the370z.com/forced-induction/132393-announcing-topgunz-ace-supercharger-kit.html)

redondoaveb 04-27-2020 01:21 PM
Quote:
Originally Posted by DUSHER (Post 3929533)
have the upgraded si impeller. Not the belt pulleys. I'm demarsjcd btw so let me know about the pulleys :tup: .
I think he may be talking about the 9lb pulley and extra tensioner pulley on the serpentine side.

TopgunZ 04-28-2020 07:41 AM
Quote:
Originally Posted by redondoaveb (Post 3929563)
I think he may be talking about the 9lb pulley and extra tensioner pulley on the serpentine side.
I am trying to get away from the "8psi" and "9psi" pulley terminology that stillen uses on their water to air kits. It confuses guys. I literally have guys always asking why they will only get 9psi and they want more.

redondoaveb 04-28-2020 09:18 AM
Quote:
Originally Posted by TopgunZ (Post 3929798)
I am trying to get away from the "8psi" and "9psi" pulley terminology that stillen uses on their water to air kits. It confuses guys. I literally have guys always asking why they will only get 9psi and they want more.
Want to really confuse them, call them the 2.87 jackshaft pulley on the serpentine side and the sti tensioner pulley. :icon14::rofl2:

V8Killer 04-29-2020 06:47 PM
https://uploads.tapatalk-cdn.com/202...796e892f82.jpg


Sent from my iPhone using Tapatalk

DUSHER 04-30-2020 10:05 PM
3 Attachment(s)
Not as pretty as V8Killer's but its getting there

BT370Z 05-01-2020 01:31 PM
Quote:
Originally Posted by Tractionless (Post 3928757)
Any chance at a group buy discount soon?
:iagree:

... and also an instructional PDF ?

DUSHER 05-01-2020 02:04 PM
1 Attachment(s)
another pic with my shitty stillen bumper. For the record do not buy this bumper.

DUSHER 05-01-2020 02:07 PM
Quote:
Originally Posted by BT370Z (Post 3931011)
:iagree:

... and also an instructional PDF ?
there is an instructional pdf. If you had his first version, then this one is a breeze to install. Especially because you dont have to deal with Stillen's dumb *** intake manifold. I would assume he doesnt want to give it out due to people trying to copy his kit **cough cough SOHO cough cough**

BT370Z 05-01-2020 04:11 PM
I’m sure it is a breeze comparatively speaking lol but it’s not unreasonable to expect an instructional to review when considering shelling out $$$$... and further, he previously mentioned one was in the works, hence the question.

Animalistic 05-01-2020 08:48 PM
I'm dying to get my hands on this upgrade. The Texas heat with the stock Stillen kit is killing my potential of power. Topgunz help me please!

Sent from my SM-G965U using Tapatalk

V8Killer 05-02-2020 10:16 AM
Aaron will get you right with his new set up don't worry!



Quote:
Originally Posted by Animalistic (Post 3931165)
I'm dying to get my hands on this upgrade. The Texas heat with the stock Stillen kit is killing my potential of power. Topgunz help me please!

Sent from my SM-G965U using Tapatalk

DUSHER 05-03-2020 09:49 PM
she's alive!

***WARNING LOUD VIDEO***
https://youtu.be/4_G59h6EzPY
https://photos.app.goo.gl/tW1XSjsjHhwTkULy7

V8Killer 05-04-2020 08:53 AM
Heck ya man! Lets see those numbers on the tune!


Quote:
Originally Posted by DUSHER (Post 3931680)

DUSHER 05-04-2020 10:16 AM
Quote:
Originally Posted by V8Killer (Post 3931769)
Heck ya man! Lets see those numbers on the tune!
Unfortunately I still need to install the coolant tank, filter, and pulleys. Should be about a week or two hopefully

1cleanZ 05-08-2020 10:19 AM
Congrats Aaron on this setup man. You truly took into consideration user feedback on your prior setups, and shows extreme initiative making the changes you did. I know Tony is extremely happy with how everything turned out, especially after him wanting to boost for years. You hit and surpassed all his expectations which says a lot!

TopgunZ 05-09-2020 08:25 AM
Another TopGun A2A conversion wrapped up!

http://www.the370z.com/members/topgu...1-img-1844.jpg

redondoaveb 05-09-2020 09:15 AM
Quote:
Originally Posted by TopgunZ (Post 3932824)
Another TopGun A2A conversion wrapped up!

http://www.the370z.com/members/topgu...1-img-1844.jpg
Is this one going to be on e85? What pre-filter are you using on the turbo guard?

DrBacon 05-11-2020 06:20 AM
Is the intake available for purchase separately yet? Going back to the states at the end of the month and would like to make a few changes to the car while stuck in the two week forced self-quarantine.

TopgunZ 05-11-2020 07:14 AM
Quote:
Originally Posted by redondoaveb (Post 3932840)
Is this one going to be on e85? What pre-filter are you using on the turbo guard?
Yes, this is going to be on E85. He wont hit the dyno until June though.

However, E85 numbers should be coming today from a different build, I hope.


Quote:
Originally Posted by DrBacon (Post 3933301)
Is the intake available for purchase separately yet? Going back to the states at the end of the month and would like to make a few changes to the car while stuck in the two week forced self-quarantine.
Right now there are 3 intake options.

Old K&N, Gen 1 style = 11psi SC must be removed for cleaning
Velocity Intake w/prefilter = 14psi Can be removed for cleaning without removing SC (5 minute job)
Turbo Guard = 16psi

RumbleFish 05-11-2020 12:52 PM
I haven't been around in a while but, WOW! TopGunz, you are the man.
:bowdown:

One of these days, I'm getting this kit.

V8Killer 05-11-2020 01:42 PM
Looking like we have a good chance of getting those numbers tomorrow.

93, VP110, and E85 along with and with out the filter numbers


Quote:
Originally Posted by TopgunZ (Post 3933312)
Yes, this is going to be on E85. He wont hit the dyno until June though.

However, E85 numbers should be coming today from a different build, I hope.




Right now there are 3 intake options.

Old K&N, Gen 1 style = 11psi SC must be removed for cleaning
Velocity Intake w/prefilter = 14psi Can be removed for cleaning without removing SC (5 minute job)
Turbo Guard = 16psi

V8Killer 05-11-2020 07:54 PM
Scratch that spoke too soon, found out we were missing a wire harness for the fuel system. Charles has been notified and looks like Wednesday is the new day for tune. Sorry fellas


Quote:
Originally Posted by V8Killer (Post 3933415)
Looking like we have a good chance of getting those numbers tomorrow.

93, VP110, and E85 along with and with out the filter numbers

DUSHER 05-11-2020 10:27 PM
Quote:
Originally Posted by TopgunZ (Post 3933312)
Yes, this is going to be on E85. He wont hit the dyno until June though.

However, E85 numbers should be coming today from a different build, I hope.




Right now there are 3 intake options.

Old K&N, Gen 1 style = 11psi SC must be removed for cleaning
Velocity Intake w/prefilter = 14psi Can be removed for cleaning without removing SC (5 minute job)
Turbo Guard = 16psi
you would have some numbers with E85 if I could get my last parts :icon17:

chuckie311 05-14-2020 11:02 AM
let me know when you have some kits for the G37 sedan ready... also can you do the pipes with ceramic coating?

TopgunZ 05-14-2020 11:31 AM
Quote:
Originally Posted by chuckie311 (Post 3934281)
let me know when you have some kits for the G37 sedan ready... also can you do the pipes with ceramic coating?
I sure will!

Right now I have done some in Anodized and Powder Coat. Taking a set to the coater today for White for a customer, which I am going to try to laser etch on to leave a logo.

I have not looked into ceramic coating.

chuckie311 05-14-2020 12:45 PM
sounds good.. if not i can get them ceramic coated here just thought it might be another option if you had it available..


Quote:
Originally Posted by TopgunZ (Post 3934297)
I sure will!

Right now I have done some in Anodized and Powder Coat. Taking a set to the coater today for White for a customer, which I am going to try to laser etch on to leave a logo.

I have not looked into ceramic coating.

TopgunZ 05-15-2020 12:01 PM
What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

http://www.the370z.com/members/topgu...attach0-74.jpg

G37xMN 05-15-2020 12:26 PM
Quote:
Originally Posted by TopgunZ (Post 3934567)
What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

http://www.the370z.com/members/topgu...attach0-74.jpg
I’m torn between the gloss red and low texture red. I want it to match my red Power Stop brake calipers.

V8Killer 05-15-2020 01:58 PM
Quote:
Originally Posted by TopgunZ (Post 3934567)
What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

http://www.the370z.com/members/topgu...attach0-74.jpg
High Texture Black and Low Texture Red

ZontheRocks 05-15-2020 02:08 PM
This kit is my 'one day' dream and as such I will throw my opinion in: low texture black and low texture red are my favorite of those presented.

Trips 05-15-2020 08:04 PM
I’m going to ask that members who are leaving negative tags because they’re bored to STOP!

I don’t see any reason why we need to keep doing this.

No further warnings will be given if it continues.

MIGHTYMOUSE 05-15-2020 08:38 PM
i'd go with gloss black or textured black.

MIGHTYMOUSE 05-15-2020 08:46 PM
Nice work! looks like a great kit to start with and exactly what I'm looking for.

what's the best way to place an order?
what is the estimated turn around time from the moment the order is made to receiving all parts?
how much is a full kit and what exactly is all included in these kits?

redondoaveb 05-15-2020 09:26 PM
Quote:
Originally Posted by TopgunZ (Post 3934567)
What are your guys opinions on colors for piping?

Gloss Black, Gloss Red, Matte Black, High Texture Black, Low Texture Black, or Low Texture Red?

Personally, the Low Texture Red looks awesome in person and is what I would choose. Now, this might clash if you have a Red car so there will be another black option.

http://www.the370z.com/members/topgu...attach0-74.jpg
Candy red would be nice too

JARblue 05-16-2020 06:30 AM
Quote:
Originally Posted by Trips (Post 3934656)
I don’t see any reason why we need to keep doing this.
Are you sure? Because, see below :tiphat:

Quote:
Originally Posted by Trips (Post 3934656)
members ... are ... bored

chuckie311 05-18-2020 02:34 PM
whats your lead time for kits.... i'm building both cars at the same time.. just curious how far your out so i can give Seb a heads up to book an appointment since they are always busy..lol

JVerge5363 05-18-2020 02:46 PM
Please add me to the list of buyers for this kit. How soon can I get my hands on one of your kits? What do I need to do to order one?

TopgunZ 05-18-2020 03:21 PM
Quote:
Originally Posted by chuckie311 (Post 3935354)
whats your lead time for kits.... i'm building both cars at the same time.. just curious how far your out so i can give Seb a heads up to book an appointment since they are always busy..lol
Right now I am telling guys 4-6 weeks.

I hope this is going on the G37 as it will not fit that Q50 ATM.

chuckie311 05-18-2020 03:55 PM
Quote:
Originally Posted by TopgunZ (Post 3935365)
Right now I am telling guys 4-6 weeks.

I hope this is going on the G37 as it will not fit that Q50 ATM.
yeah G37

new turbos and injectors are delayed for the Q with no time frame .. so moved back to the G for more power..


sounds good let me know if you need a deposit or send me a invoice for full payment when ready.. :driving:

TopgunZ 05-18-2020 06:32 PM
Quote:
Originally Posted by JVerge5363 (Post 3935356)
Please add me to the list of buyers for this kit. How soon can I get my hands on one of your kits? What do I need to do to order one?
If you want to place an order, PM me. :driving:


All times are GMT -5. The time now is 04:58 PM.
Page 8 of 15 « First 67 8 910 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2