Rear mount turbo questions

Last_warrior6 · 07-28-2020, 03:18 PM

so im a few years late on the post but im also building a Rear mount kit and had some questions about getting oil back from the turbo. im in between 3 options but have heard negative remarks and was looking to clear some up if any of yall have any info it would help
Option 1= sandwhich plate to feed the turbo and return ( was told tht they are pressurised at like 80+ psi so i would need a hella strong pump.

Option 2= i was told to 'T' off the Presure sensor but that seems like it would be pressurised too, no?

Option 3= taping the oil pan ( was told nissans shouldnt be tapped cant remember the reason but that the oil needs to feed to the block not pan

thoughts comments ideas?

ive heard about the spacer but is there another way ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
single turbo v-mount	kukpet	Forced Induction	211	08-15-2022 08:43 AM
Dan's VSR top-mount turbo 370 v3.0	FireDan50	Member's 370Z Gallery	163	05-19-2020 02:49 PM
oil-less turbo for rear mount?	airikrankin	Forced Induction	41	08-08-2016 05:22 PM
Sts rear mount turbo	Ni55anPat	Wanted	3	12-22-2012 06:15 PM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 02:53 PM

07-28-2020, 03:18 PM	#30 (permalink)
Last_warrior6 Base Member Join Date: Dec 2019 Location: FL Posts: 1 Drives: 13 Nissan 370z wht a Rep Power: 6	so im a few years late on the post but im also building a Rear mount kit and had some questions about getting oil back from the turbo. im in between 3 options but have heard negative remarks and was looking to clear some up if any of yall have any info it would help Option 1= sandwhich plate to feed the turbo and return ( was told tht they are pressurised at like 80+ psi so i would need a hella strong pump. Option 2= i was told to 'T' off the Presure sensor but that seems like it would be pressurised too, no? Option 3= taping the oil pan ( was told nissans shouldnt be tapped cant remember the reason but that the oil needs to feed to the block not pan thoughts comments ideas? ive heard about the spacer but is there another way ?