928 Motorsports Sur Grip pulleys

redondoaveb · 12-13-2018, 03:49 PM

A little update: Come to find out due to the ton of belt dust coming off the 928 pulley, the dust actually packed in and around the idler pulley bearing and seized it up. That's what ultimately shredded the belt. Good thing I have a couple of extra's laying around.

BOLIO 671 · 12-14-2018, 05:51 AM

Quote:

Originally Posted by redondoaveb

Thanks Aaron. That make's sense. I'm starting to lose confidence in 928 so that concerned me.

Wow this is the first for me to hear this of 928. I’ve been referred to 928 for upgrades especially for their Super-Vortech package. From what I’ve read on them they’ve been in the game for awhile. Has their products/Customer Service depreciated????

redondoaveb · 01-04-2019, 10:18 PM

Evidently, I must have been getting belt slip from the Sur Grip pulley starting right after install (evidenced by the amount of belt dust). It made 14.8 psi when Seb tuned it right after the pulley install. I changed out that pulley to the Vortech smooth pulley and the Gates rpm belt and did a couple of logs for Seb. The good news is, I've got zero belt slip (no belt dust at all). It's now making over 16 psi. The bad news is, my injectors are now running at 115% duty cycle. Look's like I'll be upgrading to 1300cc injectors and CJM's twin pump set up.

Spooler · 01-04-2019, 10:28 PM

Quote:

Originally Posted by redondoaveb

Evidently, I must have been getting belt slip from the Sur Grip pulley starting right after install (evidenced by the amount of belt dust). It made 14.8 psi when Seb tuned it right after the pulley install. I changed out that pulley to the Vortech smooth pulley and the Gates rpm belt and did a couple of logs for Seb. The good news is, I've got zero belt slip (no belt dust at all). It's now making over 16 psi. The bad news is, my injectors are now running at 115% duty cycle. Look's like I'll be upgrading to 1300cc injectors and CJM's twin pump set up.

Why not ID1700's? Same price as ID1300's.

redondoaveb · 01-04-2019, 10:40 PM

Quote:

Originally Posted by Spooler

Why not ID1700's? Same price as ID1300's.

It was discussed but there's a concern about rough idle with the larger injectors.

bullitt5897 · 01-30-2019, 03:01 PM

Quote:

Originally Posted by redondoaveb

It was discussed but there's a concern about rough idle with the larger injectors.

I run 2000's and idle is fine... this is an old notion. get the 1700's and have fun. ID1700 can idle like stock.

redondoaveb · 01-30-2019, 04:48 PM

Quote:

Originally Posted by bullitt5897

I run 2000's and idle is fine... this is an old notion. get the 1700's and have fun. ID1700 can idle like stock.

I've already got the 1300's. I asked Seb about going to 1700's because eventually I'll be going to V7 sc and wanted to make sure I wasn't going to have to upgrade injectors again and he said (if I remember correctly) that the 1300's are good for 850hp. I don't plan on exceeding 700.

My car goes in for ecu re-flash and re-tune next Wednesday.

12-13-2018, 03:49 PM	#16 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,297 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	A little update: Come to find out due to the ton of belt dust coming off the 928 pulley, the dust actually packed in and around the idler pulley bearing and seized it up. That's what ultimately shredded the belt. Good thing I have a couple of extra's laying around. "Z"en likes this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

01-04-2019, 10:18 PM	#18 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,297 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Evidently, I must have been getting belt slip from the Sur Grip pulley starting right after install (evidenced by the amount of belt dust). It made 14.8 psi when Seb tuned it right after the pulley install. I changed out that pulley to the Vortech smooth pulley and the Gates rpm belt and did a couple of logs for Seb. The good news is, I've got zero belt slip (no belt dust at all). It's now making over 16 psi. The bad news is, my injectors are now running at 115% duty cycle. Look's like I'll be upgrading to 1300cc injectors and CJM's twin pump set up. BOLIO 671, Spooler, wideglideleon and 1 others like this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Majestic Motorsports Exhaust vs Ark GRiP	skylin3	Intake/Exhaust	14	03-25-2017 10:10 PM
ARK Performance INC: ARK GRIP 370Z EXHAUST DYNO'D AT FSR MOTORSPORTS	TeamARK	Intake/Exhaust	11	03-21-2013 08:29 PM
Ark type 2 grip blow out sale by amplified motorsports ends nov 28th	TeamARK	AmplifiedMotorsport	3	11-27-2011 03:32 AM
Considering NST Pulleys	Rooskey	Nissan 370Z General Discussions	4	07-23-2010 04:07 AM