Introducing the RJM Positive Displacement Supercharger Kit!

bullitt5897

Introducing the RJM Supercharger Kit. This is a Pre-Order and Order List Record. RJM has asked me to keep track of it here for you guys and to open the offer for you to join the Pre-Order. But before we get into all that I wanted to go into some details of the kit:

The RJM Supercharger kit is a twin screw positive displacement supercharger with a capacity of 2.9L. This means for every rotation of the screws 2.9L of air is forced into the plenum. What this means is you have instant boost 100% of the time. The Stage 1 kits start at 12 psi which equate to approximately 500+Wheel HP and 400+Ftlbs of Torque on demand. As seen below you will notice you have an instant torque curve that is flat and a linear power band all the way to red line:


*Dyno completed in Tampa Florida in 98* weather. Stock block and stock 7at Transmission. Noted mods are stillen headers, tomei y Pipe and Amuse exhaust. Also completed on a "heart breaker" dyno.

The power delivery of this kit is perfect for the light weight of our cars. Stage 1 kits can be run on Stock components and is designed to allow the kit to grow with the user without having to replace major components. However, it is suggested for 6mt owners to upgrade their clutches and 7at owners to upgrade their transmissions (RJM has an option better and cheaper than level 10 for 7at owners). Given that the stock block is limited to approximately 500-550ftlbs the stage 1 kit is designed to stay under those limits. If you want more power there are options to go Stage 1.5 and Stage 2 for big power. The Supercharger Core itself is a whipple W175AX Gen3 and has already proven to hit 1200+whp on other platforms @ around 26psi. So needless to say we have room to grow unlike other super charger kits on the market.

Here is a flyer from Zdayz 2018:


So what comes with the "Turn Key" kit?

The "TURN KEY" kit comes with everything you need to install and drive!
-RJM Supercharger Lower Plenum
-RJM Fuel Rail Plenum
-Fuel Hose Adapters and Fittings
-Necessary kit hardware
-1200whp+ Rated Air 2 Water Intercooler
-Twin Pass Bell heat exchanger with a billet Mezeire 55gpm Water Pump
-RJM Supercharger adapter plate
-RJM O-rings for the plenums
-ID1050X Injectors (38mm with custom pigtails)*You have to run RJM Spec'd injectors due to space constraints.
-Bosch 340LPH Drop in Pump *Returnless fuel system for stage 1
-RJM Intake Collector and Throttle Body adapters *Ported to GTR gaskets from the start.
-GTR Throttle body gaskets
-Custom length HD Serpentine belt

Optional Items:
- Custom Pulley sizes
- Larger Injectors 1300cc, 1700cc, 2000cc
- Larger fuel pump and multi pump setups
- Upgraded fuel lines
- Stage 2 Triple Pass heat exchanger
- Anodization and heat dissipation coatings
- Hood Cowl for 370z
- Chromalloy Crash bar

Attached Images

whipplezdayzflyerfront.jpg (813.4 KB, 1629 views)

__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054