Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 08-20-2021, 09:40 AM

New Intake pipes from filter to turbo will be made next week. Going from 2.5in to 3in. to match the intake size of the turbo.

Mr.Squeeze · 08-20-2021, 02:21 PM

Quote:

Originally Posted by Spooler

Talked with Mark at Mazworx. He seems to think the FI exhaust manifolds are good for 500hp a side without too much of an issue. He has a set in his hands right now getting ready to port match them for someone else. He did suggest upgrading to tubular manifolds would be best.
The room to make it happen is limited. Phunk is the only one that has made it happen. I am not sure if he will ever make anymore again. I guess we shall see where I end up.

This makes sense some GTR guys are using tubular manifolds with the same size turbos you have along with 3.5 inch down pipes.

Spooler · 08-20-2021, 02:47 PM

Quote:

Originally Posted by Mr.Squeeze

This makes sense some GTR guys are using tubular manifolds with the same size turbos you have along with 3.5 inch down pipes.

Can you find out what AR they are running on the hot side please.

Spooler · 08-20-2021, 03:58 PM

It is kind of crazy where we have ended up. All the great things in the past we really needed we couldn't use because nobody could keep the heads sealed up. Now, that issue has been figured out we need some of these parts and pieces to come back.

Spooler · 08-20-2021, 04:07 PM

I don't think I ever posted my interim dyno graph. Give me a few and I will.

phunk · 08-20-2021, 04:25 PM

I believe you are going to find that the FI manifolds will take you where you want to go! When you are looking at a part that flows... whether its fuel system, cylinder head, exhaust pipe, intercooler, throttle body. Remember that there is no airflow/fuel-flow limit to any one of these components. As flow goes up, pressure will go up. Pressure drop across the A to B increases. Efficiency starts to degrade, but it never hits a wall and just stops. This is why the duration/length of a restrictive cross-section is equally important as the cross-section size itself.

As for the GT-R community.. look at the stock turbo manifolds for the GTR. They are integrated to the turbine housing (excluding 2020+ where they separated manifold and housing). People are upgrading the stock turbos from mild to wild, anything from just changing out the wheels on the stock CHRA and machining clearance in the housings, all the way to welding up the CHRA area to put in much larger turbos... and making 1200+ whp through the stock manifolds with stock internal wastegates (upgraded actuators). Those are some small manifolds!

As for CJM manifolds... I have been too busy to mess around much with fabricated products the last 2 years since I am not efficiently configured for that type of product. But I believe I did mention to you that I am in talks with someone who has been prototyping some cast stainless manifolds for the VQ that should meet your needs easily. I dont have a timeline nailed down with him but it sure looks like its close. Unless he falls off the earth I feel like he will have them done before the new year, if not any day now.

Spooler · 08-20-2021, 04:41 PM

Interim, work in progress. Ethanol Content was 75% with Ignite Red.

[IMG]

Interm dyno graph by , on Flickr[/IMG]

Spooler · 08-20-2021, 04:46 PM

Dyno Graph looks great. If we can get the IAT's under control it will look much better.

redondoaveb · 08-20-2021, 05:38 PM

Quote:

Originally Posted by Spooler

Interim, work in progress.

[IMG]

Interm dyno graph by , on Flickr[/IMG]

Nice! Is power dropping off early due to high IAT's

Spooler · 08-20-2021, 05:54 PM

Quote:

Originally Posted by redondoaveb

Nice! Is power dropping off early due to high IAT's

That or hitting the turbos limits. IAT's of 152 deg. F did not help.

Spooler · 08-20-2021, 06:02 PM

Quote:

Originally Posted by Spooler

Red= 12psi 93octane
Blue= 17psi Ignite Red
Green= 25psi Ignite Red

Bringing this back from the dead again. I am going to take a little TQ away from the midrange to help with traction.

Bringing in this back for comparison. This was on Ignite Red with Ethanol content of 85%.

redondoaveb · 08-20-2021, 06:04 PM

Quote:

Originally Posted by Spooler

That or hitting the turbos limits. IAT's of 152 deg. F did not help.

Hopefully it's IAT'S and the new ic fixes that. It'll easily hit 1000whp

Spooler · 08-20-2021, 06:10 PM

Quote:

Originally Posted by redondoaveb

Hopefully it's IAT'S and the new ic fixes that. It'll easily hit 1000whp

Ethanol content was only 75%. With 85% it will have more also. My old dyno graph was at 85%. It is full to the brim in the tank. Not too worried about that. Let Nick finish it on that. At 87% it will be even more.

Spooler · 08-20-2021, 06:12 PM

At 92 deg. ambient, which is hot as heck, it actually is really good. With all that working against me I am still happy with it. If I can make the same power on only 28psi of boost and Ignite Red content of 75% I will be happy.

Spooler · 08-20-2021, 07:41 PM

Picture of the FI intercooler. Notice how the end caps slope down to the center. This is the problem. Need to flow the same volume of air from the 2 1/2in. diameter pipe across the whole core. Notice how it only appears to have enough volume until half way and then it really get's bad. Everything that I have read says this is a problem with the endcaps. Anywhere that the air has to speed up will create heat and a pressure drop. I guess we shall see if that is correct or not.

[IMG]

FI intercooler by , on Flickr[/IMG]

08-20-2021, 09:40 AM	#4246 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,052 Drives: 2013 Nismo 370z Rep Power: 2684393	New Intake pipes from filter to turbo will be made next week. Going from 2.5in to 3in. to match the intake size of the turbo. Mr.Squeeze, Hotrodz, johnxxx and 1 others like this.

08-20-2021, 04:25 PM	#4251 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974724	I believe you are going to find that the FI manifolds will take you where you want to go! When you are looking at a part that flows... whether its fuel system, cylinder head, exhaust pipe, intercooler, throttle body. Remember that there is no airflow/fuel-flow limit to any one of these components. As flow goes up, pressure will go up. Pressure drop across the A to B increases. Efficiency starts to degrade, but it never hits a wall and just stops. This is why the duration/length of a restrictive cross-section is equally important as the cross-section size itself. As for the GT-R community.. look at the stock turbo manifolds for the GTR. They are integrated to the turbine housing (excluding 2020+ where they separated manifold and housing). People are upgrading the stock turbos from mild to wild, anything from just changing out the wheels on the stock CHRA and machining clearance in the housings, all the way to welding up the CHRA area to put in much larger turbos... and making 1200+ whp through the stock manifolds with stock internal wastegates (upgraded actuators). Those are some small manifolds! As for CJM manifolds... I have been too busy to mess around much with fabricated products the last 2 years since I am not efficiently configured for that type of product. But I believe I did mention to you that I am in talks with someone who has been prototyping some cast stainless manifolds for the VQ that should meet your needs easily. I dont have a timeline nailed down with him but it sure looks like its close. Unless he falls off the earth I feel like he will have them done before the new year, if not any day now. Mr.Squeeze, Hotrodz, Ghostvette and 5 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph Last edited by phunk; 08-20-2021 at 04:28 PM.

08-20-2021, 04:41 PM	#4252 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,052 Drives: 2013 Nismo 370z Rep Power: 2684393	Interim, work in progress. Ethanol Content was 75% with Ignite Red. [IMG]Interm dyno graph by , on Flickr[/IMG] The Weapon, phunk, BOLIO 671 and 2 others like this. Last edited by Spooler; 08-20-2021 at 06:05 PM.

08-20-2021, 06:12 PM	#4259 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,052 Drives: 2013 Nismo 370z Rep Power: 2684393	At 92 deg. ambient, which is hot as heck, it actually is really good. With all that working against me I am still happy with it. If I can make the same power on only 28psi of boost and Ignite Red content of 75% I will be happy. Mr.Squeeze and redondoaveb like this.

08-20-2021, 07:41 PM	#4260 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,052 Drives: 2013 Nismo 370z Rep Power: 2684393	Picture of the FI intercooler. Notice how the end caps slope down to the center. This is the problem. Need to flow the same volume of air from the 2 1/2in. diameter pipe across the whole core. Notice how it only appears to have enough volume until half way and then it really get's bad. Everything that I have read says this is a problem with the endcaps. Anywhere that the air has to speed up will create heat and a pressure drop. I guess we shall see if that is correct or not. [IMG]FI intercooler by , on Flickr[/IMG] JARblue and redondoaveb like this. Last edited by Spooler; 08-20-2021 at 08:02 PM.

08-20-2021, 03:58 PM	#4249 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,052 Drives: 2013 Nismo 370z Rep Power: 2684393	It is kind of crazy where we have ended up. All the great things in the past we really needed we couldn't use because nobody could keep the heads sealed up. Now, that issue has been figured out we need some of these parts and pieces to come back.

08-20-2021, 04:07 PM	#4250 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,052 Drives: 2013 Nismo 370z Rep Power: 2684393	I don't think I ever posted my interim dyno graph. Give me a few and I will.

08-20-2021, 04:46 PM	#4253 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,052 Drives: 2013 Nismo 370z Rep Power: 2684393	Dyno Graph looks great. If we can get the IAT's under control it will look much better.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM